用于飞秒紫外激光产生的LD泵浦高效Nd:YVO4绿光激光器研究

利用简单的折叠腔,腔内不含任何其它附加光学元件,LD双端泵浦Nd:YVO₄,KTP腔内倍频绿光激光器实现了低阈值、高效率的TEM₀₀模稳定激光输出.最高绿光输出功率可达到3.3W,光-光转换效率为16.2%.     

Nd:LuVO_4晶体的拉曼光谱研究

采用不同的几何配置测量了Nd:LuVO4晶体的室温拉曼光谱,根据群论对称性分类计算了该晶体的红外和拉曼活性振动模并与实验结果做了比较,指认了测定的特征谱线。测量并分析了Nd:LuVO4晶体A1g全对称类的高温拉曼光谱,讨论了拉曼频移随温度变化的关系,认为晶体的热膨胀是引起拉曼频移变化的主要原因。     

Efficient corner-pumped Nd:YAG/YAG composite slab laser

A corner-pumped type is a new pumping type in the diode-pumped all-solid-state lasers, which has the advantages of high pump efficiency and favourable pump uniformity. A highly efficient corner-pumped Nd:YAG/YAG composite slab laser is demonstrated in this paper. The maximal continuous-wave output power of the 1064~nm laser is up to 18.57~W with a slope efficiency and an optical-to-optical conversion efficiency of 44.9{\%} and 39.8{\%}, respectively. Inserting an acousto-optic $Q$-switch in the cavity, the highest average output power of the quasi-continuous wave 1064~nm laser of 6.73~W is obtained at a repetition rate of 9.26~kHz. The experimental results show that a corner-pumped type is a kind of feasible schedules in the design of diode-pumped all-solid-state lasers with low or medium output powers.     

647W灯泵浦大功率连续Nd:YAG激光器

 报道了一台灯泵浦大功率连续Nd:YAG激光器。对影响大功率固体激光器模块输出功率和光束质量的主要因素进行了理论分析，并提出提高激光器效率的措施：对聚光腔的形状、结构和材料以及冷却方式，泵浦灯的参数和材料，激光晶体的参数和镀膜进行优化设计，采用径向固定的谐振腔镜。该灯泵浦YAG晶体棒总体电光转换效率为4%，光束质量为22mm·mrad，输出功率647W。     

Coupled channel description of O+Nd scattering around the Coulomb barrier using a complex microscopic potential

Angular distributions of elastic scattering and inelastic scattering from 2⁺₁ state are measured for ¹⁶O+^142,144,146Nd systems at several energies in the vicinity of the Coulomb barrier. The angular distributions are systematically analyzed in coupled channel framework. Renormalized double folded real optical and coupling potentials with DDM3Y interaction have been used in the calculation. Relevant nuclear densities needed to generate the potentials are derived from shell model wavefunctions. A truncated shell model calculation has been performed and the calculated energy levels are compared with the experimental ones. To simulate the absorption, a ‘hybrid’ approach is adopted. The contribution to the imaginary potential of couplings to the inelastic channels, other than the 2⁺₁ target excitation channel, is calculated in the Feshbach formalism. This calculated imaginary potential along with a short ranged volume Woods–Saxon potential to simulate the absorption in fusion channel reproduces the angular distributions for ¹⁶O+¹⁴⁶Nd quite well. But for ¹⁶O+^142,144Nd systems additional surface absorption is found to be necessary to fit the angular distribution data. The variations of this additional absorption term with incident energy and the mass of the target are explored.     

High power diode single-end-pumped Nd:YVO4 laser

A fiber-coupled diode-single-end-pumped Nd:YVO₄ laser with an Nd:YVO₄ crystal of 0.3 at% doping concentration and 3×3×10 mm³ dimensions was reported. 14.850 W of continuous-wave output power in an M² factor of 1.12 was obtained under pump power of 27.365 W, with an optical conversion efficiency of 60.49%, and a slope efficiency of 64.5%.     

Y_2O_3∶Eu~(3+)薄膜的制备及发光性能的研究

以稀土氧化物为原料,用溶胶-凝胶法制备前驱液,加入适量的聚乙烯醇做成膜物质,用浸渍拉提法在石英玻璃表面上得到均匀的薄膜,然后经过适当的干燥和热处理得到Y2O3∶Eu3+发光薄膜.讨论了Eu3+的掺杂浓度和热处理温度对薄膜发光性能的影响.试验表明:Eu3+的最佳掺杂浓度为8%(摩尔分数),薄膜的发光性能随热处理温度提高而增强,当热处理温度达到700℃后,薄膜的发光性能基本上稳定.同时用原子力显微镜和X射线衍射分析了薄膜的表面形貌和结构.     

可用于钕玻璃激光系统的自锁模飞秒激光器

描述了用激光二极管抽运的全固体Ｎｄ：ＬＭＡ自锁模飞秒激光振荡器,通过理论计算和分析,在其腔内加入－非线性系数较大的介质,同时对腔结构进行优化设计,实现了自锁模。它直接产生波长为１０５４ｎｍ的激光,输出激光脉冲的宽度达６１０ｆｓ,光谱宽度为２．１ｎｍ,输出功率达１５ｍＷ。     

CF4 decomposition over solid ternary mixture NaF-Si-MO（MO=La2O3,CeO2,Pr6O-（11）,Nd2O3,Y2O3）

A solid ternary mixture consisting of NaF,silicon and one metal oxide such as La2O3,CeO2,Pr6O11,Nd2O3,and Y2O3 was prepared and usedas de-fluorinated reagent for CF4 decomposition.The results show that 90% conversion of CF4 can be reached initially over NaF-Si-La2O3,NaF-Si-CeO2,NaF-Si-Nd2O3,and NaF-Si-Y2O3 at 850 C.The fresh and used reagents were characterized using XRD and XPS techniques.It was found that the active components of NaF and metal oxides in NaF-Si-CeO2,NaF-Si-Pr6O11,NaF-Si-Nd2O3,and NaF-Si-Y2O3 weretransformed into inert phases of mixed metal fluorides and silicates,respectively,resulting in an ineffective utilization of these de-fluorinatedreagents,whereas no inert phases from NaF and La2O3 can be observed in the used NaF-Si-La2O3,indicating the NaF-Si-La2O3 reagent couldbe utilized more efficiently than the other reagents in CF4 decomposition.     

荧光光度法直接测定高纯氧化钕中的痕量镨和铈

使用Ｐ－ＥＬＳ５０荧光光谱仪，在盐酸介质中，用同一激发波长激发，分别测定Ｐｒ（Ⅲ）（ｎｍ）和Ｃｅ（Ⅲ）（３５６ｎｍ）发射峰强度。