Crystal Structure of Adduct 2-Phenyl-imidazo [ 4,5-f ] 1,10-phenanthroline Methanol

The structure of the title adduct comprises a phenanthroline derivative 2-phenyl-imidazo[4,5-f]1,10-phenanthroline and a methanol.The composition of the crystalline adduct was characterized as C19H12N4.CH3OH.It belongs to orthorhombic system,space group Pna21 with a=1.3693(4)nm,b=2.2988(7)nm,c=0.51338(15)nm,V=1.6160(8)nm^3.Z=4,and final R1=0.0423.wR2=0.1012 .Crystal structure shows that all the 19 carbon atoms and 4 nitrogen atoms are coplanar.The bond length data indicated that a very extensive conjugation system was formed.This conjugation makes the compound being a potentially excellent energy transformer used for luminescent materials.     

论设计无对称中心的有机功能晶体

本文仅当前设计无对中心的机功能晶体，作了简要地论述。     

深紫外无机非线性光学晶体硼铍酸锶及其分子工程学探索方法

阐述了紫外无机非线性光学晶体分子工程学探索方法的基本特点，具体分析深紫外无机非线性光学晶体硼铍酸锶（ＳＢＢＯ）以氟硼铍酸钾（ＫＢＢＦ）为主要参考晶体的分子设计方法，随后根据晶体结构研究、单晶培养、和非线性光学性能测定等实验结果讨论ＳＢＢＯ作为新型深紫外无机晶体的主要优点，即它既具有更短的紫外吸收边（接近１５５ｎｍ）和较大的非线性光学系数（ｄ２２（ＳＢＢＯ）＝０６×ｄ２２（ＢＢＯ）＝１３８ｐｍ／Ｖ），同时晶体无明显层状习性，并肯有良好的化学稳定性和机械性能     

Cr^4＋：YAG,Cr^4＋：Mg2SiO4近红外荧光辐射温度特性研究

测量了Ｃｒ＾４＋，ＹＡＧ、Ｃｒ＾４＋，Ｍｇ２ＳｉＯ４晶体在室温和液氮温度下的荧光光谱，吸收光谱和激发态寿命，讨论了温度变化时，两种晶体中Ｃｒ＾４＋近红外辐射积分强度变化与激光发态寿命变化的关系，得出结论：在７７Ｋ￣３００Ｋ范围内，Ｃｒ＾４＋的＾３Ｔ２能级荧光辐射截面本身受温度影响不大，Ｃｒ＾４＋辐射荧光的变化，主要是由无辐射弛豫速率随温度变化而引起的。     

用BBO晶体产生196～228nm波长的紫外辐射

本文报道了用BBO晶体通过混频产生196～228nm可调谐紫外辐射的研究结果.产生200nm及222nm的量子转换效率分别为12%及23%,与理论计算值基本相符.     

微微秒自动调谐参量激光的研究

采用一对MgO:LiNbO_3角度调谐覆盖了红近外波段0.7～2.2μm,并配以自动波长扫描。文中分析了影响脉冲宽度与线宽的因素,与实验结果相吻合。脉宽<30ps,线宽～1nm(简并波长附近～10nm),单脉冲峰功率达MW级,参量光总能量转换效率达5.4％。     

氙灯泵浦的NYAB晶体调Q激光运转特性及实验研究

首次报道了氙灯泵浦的自激活自倍频NYAB复合功能晶体的BDN染料片调Q运转,获得了自倍频绿光单脉冲.测量了不同L和T_o情况下的绿光脉冲的能量、脉宽和峰值功率.文中还从理论上推导了自激活自倍频晶体调Q激光器的方程组.数值求解方程组,所得的理论数据与实验结果很好地相符.最后,讨论了进一步提高绿光脉冲峰值功率的途径.     

在BBO中产生217.3-2 21.4nm高功率和频输出

用Q-YAG激光的三次谐波(355nm)与调谐的Rh·6G染料激光在β-BaB2O4(BBO)晶体中和频,获得217.3～221.4nm连续调谐输出,和频输出的最大能量为250μJ,转换效率为11%.我们还讨论了获取最大和频输出能量的一些实验条件.     

Structural Phase Transformations of ZnS Nanocrystalline Under High Pressure

In-situ energy dispersive x-ray diffraction on ZnS nanocrystalline was carried out under high pressure by using a diamond anvil cell. Phase transition of wurtzite of 10nm ZnS to rocksalt occurred at 16.0GPa, which was higher than that of the bulk materials. The structures of ZnS nanocrystalline at different pressures were built by using materials studio and the bulk modulus, and the pressure derivative of ZnS nanocrystalline were derived by fitting the equation of Birch-Murnaghan. The resulting modulus was higher than that of the corresponding bulk material, which indicates that the nanomaterial has higher hardness than its bulk materials.