Synthesis and structural revision of naturally occurring ayapin derivatives

The synthesis of three highly oxygenated naturally occurring coumarins, 8-methoxy-6,7-methylenedioxycoumarin, 5-methoxy-6,7-methylenedioxycoumarin and 5,8-dimethoxy-6,7-methylenedioxycoumarin is described for the first time, together with a new method for the preparation of ayapin (6,7-methylenedioxycoumarin). Comparison of the spectroscopic data of the synthetic tetraoxygenated coumarin 5,8-dimethoxy-6,7-methylenedioxycoumarin with literature reports resulted in the structural revision of several natural coumarins. Two coumarins, both identified as 5,8-dimethoxy-6,7-methylenedioxycoumarin must have other structures, while the structure of another coumarin, described as the isomeric 7,8-dimethoxy-5,6-methylenedioxycoumarin has to be revised to 5,8-dimethoxy-6,7-methylenedioxycoumarin.     

Highly sensitive catalytic determination of molybdenum

A novel, highly sensitive, selective, and simple kinetic method was developed for the determination of Mo(VI) based on its catalytic effect on the oxidation of 1-amino-2-naphthol-4-sulfonic acid (ANSA) with H₂O₂. The reaction was followed spectrophotometrically by tracing the oxidized product at 465 nm after 30 min of mixing the reagents. The optimum reaction conditions were: 10 mmol l⁻¹ ANSA, 50 mmol l⁻¹ H₂O₂, 100 mmol l⁻¹ acetate buffer of pH 5.0 ± 0.05 and at 40 °C. Addition of 200 μg ml⁻¹ diethylenetriaminepentaacetic acid (DTPA) conferred high selectivity for the proposed method. Following the recommended procedure, Mo(VI) could be determined with a linear calibration graph up to 2.5 ng ml⁻¹ and a detection limit, based on the 3S_b-criterion, of 0.027 ng ml⁻¹. The unique sensitivity and selectivity of the implemented method allowed its direct application to the determination of Mo(VI) in natural and industrial waste water. The method was validated by comparison with the standard ETAAS method. Moreover, published catalytic-spectrophotometric methods for the determination of molybdenum were reviewed.     

Improved method for the determination of sulfur components in natural gas

Determination of trace concentrations of sulfur components in natural gas is a true analytical challenge. Only analytical procedures based on gas chromatography can meet the sensitivity and accuracy requirements dictated by environmental regulation institutions and modern chemical industry. In the present contribution the sample pretreatment and chromatographic separation steps have been evaluated and optimized based on the use of a flamebased sulfur chemiluminescence detector (SCD) for target compound detection. The proposed instrument consists of a programmed temperature vaporizing (PTV) injector employing a liner packed with Chromosorb 104, a 4 μm thick film apolar column and a flame-based SCD. Using a 13 mL sample loop the detection limit achievable with the new method is 3 μg S/m³. The precision of replicate measure. ments is generally in the range of 5–15% relative standard deviation. Lower detection limits can be achieved by preconcentrating larger sample volumes, e.g. 100 mL.     

Rewiring cellular metabolism for heterologous biosynthesis of Taxol

Abstract

Taxol is one of the anticancer drugs synthesized naturally in the evergreen Taxus brevifolia forest tree belonging to the yew family (Taxaceae) growing on the Pacific. There are reportedly evidence for treating ovarian, breast and lung cancers through this drug given its unique structural and functional features. Extraction of this drug from yew trees bark is one of the most common ways of producing this drug, but 3000 trees are needed to obtain a kilogram of Taxol. Hence, further attention has recently been attracted to the metabolic engineering strategies, including, engineering cellular metabolism of microorganisms and their optimization. Accordingly, the present paper article was aimed to review recent advances in elevating the production and commercialization of Taxol through metabolic engineering techniques.     

Quantitative Analysis of Sulfonamide Residues in Natural Animal Casings by HPLC

A multiresidue method has been developed for the simultaneous determination of sulfadiazine, sulfathiazole, sulfapyridine, sulfamerazine, sulfamethoxydiazine, sulfamethylthiazole, sulfamethazine, sulfamonomethoxine, sulfamethoxypyridazine, sulfisoxazole, sulfamethoxazole, sulfadimethoxine and sulfaquinoxaline in natural animal casings by HPLC after solid-phase extraction. The sulfonamides were extracted with acetonitrile and the extract cleaned up with an Oasis MCX SPE cartridge prior to analysis. Separation was on a ZOBAX Eclipse XDB-C₈ column using gradient elution with acetonitrile/methanol/0.1% acetic acid. The effect of separation conditions on chromatographic behavior and recovery has been studied. Calibration graphs were linear with very good correlation coefficients (r = 0.9983−0.9996) in the concentration range from 0.02 to 1 μg mL⁻¹. The limits of quantitation (LOQ) for the 13 sulfonamides were in the range of 1.5–2.2 μg kg⁻¹. Decision limits (CCα) and detection capabilities (CCβ) were in the range of 105.2–111.0 and 113.0–120.2 μg kg⁻¹, respectively. The recovery for casings spiked with 1.5–100 μg kg⁻¹ ranged from 65.2 to 85.9%. The relative standard deviations (RSDs) of the sulfonamides for six measurements at 100 μg kg⁻¹ were from 2.2 to 7.7%. The applicability of the method to the analysis of salted swine casings, salted sheep casings and dry casing samples was demonstrated.     

Natural zeolitic material of the clinoptilolite type doped with iodine and its ions

The aim of this study was the preparation of natural zeolitic materials doped with iodine and its ions. Natural zeolite from an East Slovakian deposit was used. The content of iodine in the zeolitic products depended on the experimental conditions used for the preparation. The products and their intermediates obtained at 100, 200, 400 and 900°C were identified.     

Marine Metabolites and Metal Ion Chelation: The Facts and the Fantasies

The marine environment is a seemingly inexhaustible treasury of organisms whose secondary metabolites bear witness to the lavishness and inventiveness with which nature is able to manipulate molecular architecture. But to what purpose are these diverse and often grotesque compounds produced? This review is founded on the premise that some of them may be involved in the uptake and transport of metal ions present in the aquatic milieu. Many metabolites produced by terrestrial organisms are known to act as ionophores, but the case for similar behavior by their marine counterparts is far hazier. Notwithstanding the relative abundance of certain metal ions in the oceans, and of metabolite structures possessing features that should facilitate the chelation of metal ions, few attempts to establish a connection between these two phenomena have been reported. We have whittled down the voluminous literature of natural products derived from marine sources to expose a core of observations and speculations germane to our premise. These facts and fantasies are evaluated in this review. A mere handful of metal-containing complexes has actually been isolated; furthermore, attempts to prepare such complexes in vitro are rare, and spectroscopic evidence for metal–metabolite interactions, whether in vivo or in vitro, is not common. Only with the vanadium-sequestering tunichromes does a logical (but by no means complete) picture begin to emerge. In several other cases, the plausibility of metal chelation, though mooted by authors, remains unsupported by experimental evidence. However, continuing efforts to obtain structural, and particularly conformational, information on the metabolites by means of X-ray crystallography, nuclear magnetic resonance spectroscopy, and molecular mechanics calculations would seem to provide the key to a rational approach to this neglected topic. On the basis of recent studies dealing with such structural aspects, we present a selection of candidate compounds, some of which are the targets of our own synthetic attentions, whose potential for binding to metal cations merits further research.     

Eco-dyeing and functional finishing of wool fabric based on Portulaca oleracea L. as colorant and Musa basjoo as natural mordant

Biomass energy is the most acknowledged renewable resource due to its universality, richness, and renewability. This study utilized a Portulaca oleracea L. plant as a natural colorant for wool fabric dyeing with a high color yield at optimum extraction and dyeing conditions. To evaluate the dyeing mechanism and feasibility of the extracted dyes, we analyzed and characterized the molecular structure and nano-level particle size. The dyeing kinetics and the morphology of dyed fabrics were integratedly explored; the adsorption process of wool fabric on natural colorant molecules was increasingly in line with the pseudo-second-order kinetic adsorption model. Further, the dyeing effects of wool fabrics were compared to that of Musa basjoo mordant and synthetic dyes to confirm the superior color depth (K/S value 23.53), biological function as anti-ultraviolet (UPF value 253.47), and anti-bacterial activity (antibacterial rate of Staphylococcus aureus/Escherichia coli was 71.3%/37%). Our findings provide a feasible scheme for providing deep color and biological activity to wool fabrics. This has broad application prospects in the field of eco-friendly textile materials.     

A stereoselective synthesis of (2R,3S)-2-amino-3,4-dihydroxybutyric acid using an ether directed aza-Claisen rearrangement

A new approach for the stereoselective synthesis of (2R,3S)-2-amino-3,4-dihydroxybutyric acid, an α-amino acid from Lyophyllum ulmarium, has been accomplished using an ether directed aza-Claisen rearrangement. On investigation of optimal conditions for this key step it was shown for the first time that Au(I) can be used to catalyse this transformation.     

天然水体底质中腐植酸的光谱表征

分别用紫外-可见光谱、傅立叶变换红外光谱(FTIR)、三维荧光光谱和荧光等高线谱对提取的腐植酸和商品腐植酸进行了表征，并将分析结果与Aldrich和上海试剂二厂生产的腐植酸进行了比较。结果表明：3种底质腐植酸之间以及同商品腐植酸的紫外-可见光谱、傅立叶变换红外光谱(FTIR)相似，含有相同类型的官能团。对不同腐植酸的三维荧光光谱和荧光等高线谱的分析表明其在结构上存在一定的差异；腐植酸有较明显的荧光光谱特性，可以尝试使用三维荧光光谱技术来揭示其在结构上的差异。