单光子态的产生与测量

报道了通过自发参量下转换产生单光子态的实验研究,使用中心波长425 nm的飞秒脉冲泵浦Ⅰ类非共线相位匹配的BBO晶体,在实验上得到单光子计数率为2.978×10-4,并分析了实验中的相关问题.     

光纤传感振动检测系统及其实验研究

实际工程结构中的振动检测是十分重要的，也是十分复杂的，常用的结构振动检测传感器易受工程现场恶劣环境的影响．而光纤传感器具有小巧、抗电磁干扰、灵敏度高、适合长期监测等优点。本文建立了基于马赫—曾德(Mech-Zehnder)干涉原理的光纤传感振动检测系统．研制了运用先进的数字信号处理技术采集和处理数据的专用软件，并在典型结构件——钢制悬臂梁结构上进行了外加信号作用下的强迫振动检测和冲击载荷作用下的自由衰减振动检测，测量了该结构件的频率及振幅，其结果与同时进行的成熟的电测结果相近，说明光纤传感器用于结构件的振动测量是可靠的。本文为光纤传感器应用于实际工程的振动检测提供了新的技术装置，具有工程应用前景。     

镍-酸性铬兰K络合物吸附波

用微分脉冲溶出伏安法研究了镍(11)与酸性铬兰K(ACBK)所生成的络合物在悬汞电极上的电化学特性及电化学反应机理，发现电极反应为镍与酸性铬兰K所生成的络合物吸附在电极表面后发生的不可逆还原。在HCl-硼砂介质中(pH8．67)，络合物在-316mV处有一吸附还原峰，其峰电流与镍浓度在0．001～0．010μ/mL范围内呈现良好的线性关系，其最低检出浓度为0．0005μg／mL。     

Voltammetry in Undiluted Acetic Acid. In Situ Determination of Water

Water present in undiluted acetic acid can be monitored in situ with Pt and Au microelectrodes using differential pulse and square‐wave voltammetries. Both reduction and oxidation peaks can be obtained. The best quantitative analytical results were obtained for the anodic peak, the Pt microelectrode, and differential pulse voltammetry. The anodic water peak is located at +1.55 V vs. the quasi reference Pt electrode. The voltammetric peak obtained at Pt electrode is apparently not a diffusional one, however, the calibration plot obtained by employing this peak is linear over a wide concentration range, up to 4 mol dm^?3. The detection limit has been estimated as 2.3 mM or 0.0043 v/v%. The developed method may be particularly useful, since the Karl Fischer method can not be used to determine water in glacial acetic acid due to the estrification reaction of acetic acid with methanol. A voltammetric wave of undiluted acetic acid could not be obtained in the positive and negative ranges of potential.     

OH-Induced shift from carbon to oxygen acidity in the side-chain deprotonation of 2-, 3- and 4-methoxybenzyl alcohol radical cations in aqueous solution: results from pulse radiolysis and DFT calculations

DFT calculations have been carried out for 2-, 3- and 4-methoxybenzyl alcohol radical cations (1⁺, 3⁺ and 4⁺, respectively) and the α-methyl derivatives 2⁺ and 5⁺ using the UB3LYP/6-31G(d) method. The theoretical results have been compared with the experimental rate constants for deprotonation of 1⁺-5⁺ under acidic and basic conditions. In acidic solution, the decay of 1⁺-5⁺ proceeds by cleavage of the C-H bond, while in the presence of ⁻OH all the radical cations undergo deprotonation from the α-OH group. This pH-dependent change in mechanism has been interpreted qualitatively in terms of simple frontier molecular orbital theory. The ⁻OH induced α-O-H deprotonation is consistent with a charge controlled reaction, whereas the C-H deprotonation, observed when the base is H₂O, appears to be affected by frontier orbital interactions.     

Study of a Catalytic Mechanism in Additive Differential Pulse Techniques

The new electrochemical double pulse technique, known as additive differential normal pulse voltammetry (ADNPV) when there is no restriction on the duration of both pulses, and additive differential pulse voltammetry (ADPV) when t₂?t₁, has been applied to a pseudo‐first‐order catalytic mechanism. The expressions obtained here are applicable to planar and spherical electrodes, of any radius. This is of great interest since the size of the electrode plays an important role in the preponderating of diffusive and kinetics processes. The signal obtained with this technique presents the same morphological characteristics as the triple pulse technique, double differential pulse voltammetry (DDPV) and is more advantageous than DDPV and than the double pulse one, differential pulse voltammetry (DPV).     

Voltammetric studies on the interactions between camazepam metabolic series and human serum albumin. Determination of oxazepam using adsorptive stripping voltammetry

The behaviour of oxazepam in adsorptive stripping voltammetry was studied taking into account those conditions which have an influence on the accumulation step (electrolyte, pH, time, potential, drop size and stirring rate), rest time and stripping step (pulse amplitude and scan rate). Oxazepam can be determined at a hanging mercury drop electrode by differential-pulse voltammetry in 0.008 M Britton-Robinson buffer at pH 2.0 with a ?0.50 V accumulation potential. Its detection limit was found to be 3.6 × 10^?10 M (30-s accumulation) and the relative standard deviation for oxazepam concentrations in the range 2.8 × 10^?8?4.0 × 10^?7 M is lower than 2.8% (80-s accumulation). In addition, a procedure using adsorptive stripping voltammetry was developed to study the interactions occurring between human albumin and the camazepam metabolic series (camazepam, temazepam and oxazepam). The interactions decreased in the order temazepam ? oxazepam ? camazepam and the groups and structural modifications favouring interaction were determined.     

利用收音机制作激光通信演示器

本文介绍了一种利用学生在电子技术实验课中自己组装的收音机,稍加改造而制作的一种简单适用、并且效果很好的激光通信演示器。     

A Fault Detection Method for Electrohydraulic Switch Machine Based on Oil-Pressure-Signal-Sectionalized Feature Extraction

A turnout switch machine is key equipment in a railway, and its fault condition has an enormous impact on the safety of train operation. Electrohydraulic switch machines are increasingly used in high-speed railways, and how to extract effective fault features from their working condition monitoring signal is a difficult problem. This paper focuses on the sectionalized feature extraction method of the oil pressure signal of the electrohydraulic switch machine and realizes the fault detection of the switch machine based on this method. First, the oil pressure signal is divided into three stages according to the working principle and action process of the switch machine, and multiple features of each stage are extracted. Then the max-relevance and min-redundancy (mRMR) algorithm is applied to select the effective features. Finally, the mini batch k-means method is used to achieve unsupervised fault diagnosis. Through experimental verification, this method can not only derive the best sectionalization mode and feature types of the oil pressure signal, but also achieve the fault diagnosis and the prediction of the status of the electrohydraulic switch machine.     

快速响应高压电源在KTP晶体极化反转中的应用研究

分析了KTP晶体电导率的特性,设计与研制出一种新型的高压脉冲放大器,可将任意信号发生器产生的信号线性放大,响应速度快,最高输出电压为4000V,最大输出电流为30mA,功率可达100W.用其在KTP晶体上进行多次极化反转实验,取得良好的实验结果.