Milling assisted synthesis of calcium zirconate СаZrО3

Monophase calcium zirconate (CaZrO₃) has been prepared from the equimolar ZrO₂ + CaCO₃ mixture by two-step synthesis process. In the first step, mechanical treatment of the mixture is performed in an AGO-2 planetary ball mill. In the second step, the milled mixture is annealed to form calcium zirconate. High-energy ball milling of the (ZrO₂+CaCO₃) mixture results in decrease in the temperature of CaZrO₃ formation during annealing at 950 °C. The enhancement of CaZrO₃ synthesis is due to accumulation of excess energy by the reagents, decreasing the particle size and notable increase in the interphase area because of “smearing” of CaCO₃ on ZrO₂ particles during milling. Nanocrystalline calcium zirconate has been produced by controlling the annealing temperature and time.     

Chemical synthesis of mesoporous CuO from a single precursor: Structural, optical and electrical properties

We report a simple method for growing photoluminescent mesoporous CuO nanoparticles by a chemical route, using the single precursor technique. The final products were characterized by powder X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), N₂ adsorption-desorption isotherm, UV-vis absorption spectroscopy, photoluminescence (PL) spectroscopy, Raman spectroscopy, Fourier transform infrared (FTIR) spectroscopy and Hall measurements. Structural analysis reveals that the average pore diameter of the as-prepared CuO is about 38.8 Å and it comes with an average surface area of 66.63 m²/g. N₂-sorption analysis shows that the resulting isotherm as type IV; which is the characteristic of mesoporous materials. The average crystal diameter, as derived from the XRD data analysis is found to be about 20 nm. FESEM measurement reveals that the material is composed of cubic nanoparticles. The UV-vis spectrum of the material shows significant amount of blue-shift in the band gap energy (E_g), due to the quantum confinement effect exerted by the nanocrystals. The Raman study of the CuO nanostructures also indicates the high crystalline nature of the material. From the positive sign of Hall coefficient, the p-type conduction nature of the deposited film is established. The film was found to show high magnetoresistance, which is in the order of 10⁵ Ω.     

Symmetry of LaAlO3 nanocrystals as a function of crystallite size

Properties of LaAlO₃ nanocrystallites obtained by the precipitation method, doped with praseodymium and chromium ions were examined by spectroscopic means. Raman spectroscopy, high resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD) and electronic spectroscopy proved that symmetry of LaAlO₃ crystallites depends on their size. At room temperature the smallest obtained crystals (average size ∼5 nm) have cubic symmetry, while the largest ones (average size over 110 nm) exhibit rhombohedral symmetry. Possible explanations for this phenomenon are discussed.     

Spectral behavior of the emission around 3.31 eV (A-line) from ZnO nanocrystals

The emission at around 3.31 eV (A-line) from three types of ZnO nanocrystals with different particle sizes (10-1000 nm) was studied. The photoluminescence (PL) measurements were performed under different excitation densities and at different temperatures. The A-line emission exhibited a strong dependence on temperature and excitation power density. With increasing excitation density and temperature overlapping of the closely spaced first longitudinal optical (LO) phonon replica of free excitons by the A-line emission was observed.     

Modification of carrier dynamics in CdSe nanocrystals by excess Cd in deposition bath

Photoexcited carrier dynamics in thin CdSe nanocrystalline films prepared by chemical bath deposition are strongly dependent on the deposition parameters. In this paper, we show how an increase in concentration of CdSO₄ in deposition bath affects the photoexcited carrier dynamics in nanocrystals. We used ultrafast absorption and photoluminescence laser spectroscopy to compare the carrier dynamics in samples prepared with and without increased CdSO₄ concentration. We have found that in the Cd-rich samples the spectral dependences of both photoluminescence and absorption dynamics are considerably less pronounced and the dynamics are slower. The observed effects were explained by the suppression of surface mediated carrier relaxation due to the passivation of individual nanocrystals by cadmium hydroxide and/or by sulphatocomplexes of Cd²⁺.     

Synthesis of high specific surface area YSZ (ZrO<Subscript>2</Subscript>–8Y<Subscript>2</Subscript>O<Subscript>3</Subscript>) nanocrystalline powder by modified polymerized complex method

In this study high specific surface area yttria-stabilized zirconia (ZrO₂–8Y₂O₃) nanocrystalline powder have been synthesized through “modified polymerized complex (MPC) method”. Zirconium chloride, yttrium nitrate, citric acid and ethylene glycol were polymerized at 80 °C to produce a gel-like mass in which metallic ions were uniformly distributed. During the thermal treatment of dried gel, nanocrystalline YSZ powder was formed. Thermal reactions and phase formation of dried gel were investigated through thermal analysis (DTA/TG) and X-ray diffraction (XRD) analysis, respectively. Chemical bonding and thermal decomposition behavior of dried gel was investigated by FTIR analysis. During decomposition, the nature of the bonding between carboxylate groups and the cations changed from unidentate to bridging at 370 °C and carbonate species were detected at 470 °C. Morphology of powder calcined at 650 °C was analyzed by scanning electron microscope (SEM). YSZ powder with high specific surface area was prepared successfully by this method.     

The effect of annealing on the mechanical properties of a ZrAlNiCu metallic glass

In this paper, the effects of annealing and nanocrystallization on the mechanical properties of a Zr₅₅Al₁₀Ni₅Cu₃₀ metallic glass have been studied. It has been shown that the high volume fractioned nanocrystals facilitate the formation of shear bands and thus decrease the yield stress. At the same time, the nanocrystals also facilitate the formation of interfacial voids during compression, resulting in substantial decrease in the plasticity of the metallic glass.     

Isolation and characterization of nanocrystalline cellulose from flaxseed Hull: A future onco-drug delivery agent

Cellulose is a polysaccharide composed of D-glucopyranose linked by 1,4 β-glycoside bond with three hydroxyl groups. These hydroxyl groups in cellulose have an important role in the compactness of crystalline structure and in determining the physical properties of cellulose. Cellulose in nanometers size range from 10 nm to 350 nm is known as nano cellulose, which has a variety of applications due to the unique properties such as low density, biodegradable, and good mechanical properties. In the present study, we present the isolation of the nano cellulose from flaxseed hull for the first time. The isolated nano cellulose was characterized by techniques such as UV–Vis, FT-IR, BET, XRD SEM, and TEM. The nano cellulose obtained was found to be crystalline in nature with a crystallinity index of 46% and the surface area of 5 cm²/g with excellent thermal stability.     

Dependence of photoluminescent properties of cubic Y2O3:Tb nanocrystals on particle size and temperature

Temperature-dependent spectral properties in the cubic Y₂O₃:Tb³⁺ nanocrystals (NCs, 10-70 nm) under 488 nm excitation were studied and compared to that in the bulk. In NCs, emission lines assigned to the ⁵D₄-⁷F_J (J=1-6) transitions of Tb³⁺ ions and a broad band originated from oxygen defects were observed. As a function of temperature, two intensity maximums of the ⁵D₄-Σ⁷F_J transitions appeared in the NCs, at ∼250 and ∼500 K, while in the bulk only one maximum appeared at ∼250 K. The relative intensity of the maximum at ∼500 K to that at ∼250 K increased with decreasing particle size. The intensity maximum of the band emissions that came from the oxygen defects appeared in the range of 500-600 K. The appearance of intensity maximum as a function of temperature was attributed to the rivalry between thermal quenching process and phonon-assisted excitation. The appearance of two maxima in the NCs was attributed to the luminescence contributed by different Tb³⁺ centers, the internal and the surface. The emission for the surface Eu³⁺ centers has higher quenching temperature in contrast to that for the internal centers.     

Nanoparticles and nanocrystals of a new bidentate nickel(II) complex of N-[ethyl(propan-2-yl)carbamothioyl]-4-nitrobenzamide: synthesis,characterization, and crystal structures

The nickel(II) complex of N-[ethyl(propan-2-yl)carbamothioyl]-4-nitrobenzamide has been synthesized and characterized by Fourier transform-infrared spectroscopy, elemental analysis, nuclear magnetic resonance spectroscopy, and mass spectrometry (atmospheric pressure chemical ionization mass spectrometry). The single-crystal X-ray structures of N-[ethyl(propan-2-yl)carbamothioyl]-4-nitrobenzamide (1) and bis[N-[ethyl(propan-2-yl)carbamothioyl]-4-nitrobenzamide]nickel(II) (2) have been determined from single-crystal X-ray diffraction data. Loss of the N–H proton resonance and the N–H stretching vibration and the shift of the ν_C=O and ν_C=S stretching vibrations confirm formation of the metal complex. These studies show that the metal complex is neutral in cis-configuration. The complex has been used as a single-source precursor for the deposition of nickel sulfide nanocrystals by thermolysis. The nickel sulfide nanocrystals were characterized by X-ray powder diffraction and transmission electron microscopy.