用有效折射率／有限元法设计1．55μmTi：LiNbO_3单模条波导及其方向耦合器

应用有效折射率／有限元法（ＥＩ－ＦＥＭ），考虑到ＬｉＮｂＯ３晶体和Ｔｉ扩散的各向异性，折射率增量与寻常光、非寻常光及波长色散的关系，设计了１．５５μｍ光波长下工作的ｚ切ｙ传播Ｔｉ：ＬｉＮｂＯ３单模条波导的制备参数，计算和分析了其单模特性、模式场分布及其变化规律．扩展了ＥＩ－ＦＥＭ，将其用于求解耦合波导系统，确定了方向耦合器的耦合长度及其波长色散特性．     

低阈值飞秒钛宝石激光器的理论研究

利用数值求解的方法，从理论上系统分析了决定钛宝石激光器锁模阈值的几个关键因素. 定 量分析了腔模对克尔效应的主导作用，并将光孤子模型引入低阈值锁模理论，分析了色散与 阈值的关系. 根据理论指导在实验上完成了一台阈值低至390 mW自启动飞秒掺钛蓝宝石激光 器. 关键词： 低阈值 掺钛蓝宝石激光器 克尔透镜锁模 光孤子     

一种新化合物K2Ti8O15纳米线

钛酸钾晶须通常是直径和长度在微米量级的无机晶须 ,可用Ｋ2 Ｏ·ｎＴｉＯ2 表示其组成 ,ｎ =1,2 ,4 ,6 ,8,[1] .六钛酸钾晶须具有耐高温、耐腐蚀、纤维拉伸强度高、导热系数小、红外反射率高 ,硬度低的特点 .在民用及工业方面有很多应用 .如催化剂载体、离子吸附交换材料、高温过滤器、绝热材料、耐摩擦材料等[2～ 5] .钛酸钾纳米线的合成尚未见报道 .我们在用电弧产生的Ｎ2 等离子体热解焦油时 ,生成了一种直径 9～ 2 0ｎｍ长约几百纳米线 .Ｘ射线能谱定量分析表明这种纳米线化学组成为Ｋ2 Ｔｉ8Ｏ15,是一种新的非化学计量化合物 .试验装…     

ICP-AES法测定钛基复合材料中的Al、Mo、B的研究

本文采用ＩＣＰ－ＡＥＳ法对钛基复合材料中的合金元素Ａｌ、Ｍｏ、Ｂ的测定进行研究,着重进行了基体元素对待测元素Ａｌ、Ｍｏ、Ｂ的干扰试验及各元素在测定浓度范围内线性相关性,进行了酸度试验,测定了钛基复合材料中上述三元素的含量,得到了较好的精密度和准确度。     

Spin gapless semiconductor like Ti2MnAl film as a new candidate for spintronics application

A novel Heusler ferrimagnet Ti₂MnAl film has been grown on Si(001) substrate using magnetron sputtering. Characteristics of its magnetic and transport properties reveal the spin‐gapless‐semiconductor (SGS) nature of the stoichiometric Ti₂MnAl, in agreement with theoretical prediction. The as‐grown SGS‐like Ti₂MnAl film demonstrated high Curie temperature, nearly compensated ferrimagnetic properties with small coercivity and low magnetization. It also showed semiconductor‐like behavior at room temperature allowing good compatibility with commercial Si‐based semiconductor. In this regards, Ti₂MnAl film is a potential candidate material for spintronics application, especially for the minimization of energy consumption of device. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Surface modification of pure titanium by pulsed electron beam

The microstructure, hardness and corrosion resistance of commercially pure Ti treated by low energy high current pulsed electron beam (LEHCPEB) have been investigated. The thin near-surface melted layer rapidly solidified into β and subsequently transformed into ultrafine α′ martensite. This has led to a drastic improvement of the corrosion properties and a significant increase (more than 60%) in hardness of the top surface.     

Study of Optically Stimulated Luminescence of LiF:Mg,Ti for beta and gamma dosimetry

Modern advances in radiation medicine – radiodiagnosis, radiotherapy and interventional radiography – each present dosimetry challenges for the medical physicist that did not exist previously. In all of these areas a constant balance has to be made between the treatment necessary to destroy the tumor and the unnecessary exposure of healthy tissue. Innovative applications of OSL dosimetry are now appearing in each of these areas to help the medical physicist and oncologist design the most effective, and least deleterious, treatment for their patients. High sensitivity, precise delivery of light, fast readout times, simpler readers and easier automation are the main advantages of OSL in comparison with TLD.This work aimed to study the application of OSL technique using lithium fluoride dosimeters doped with magnesium and titanium (LiF:Mg,Ti) for application in beta and gamma dosimetry.     

钛扩散铌酸锂矩形波导中的双折射耦合对传播常数的影响

 从亥姆霍兹方程出发，得到了各向异性光波导在弱导近似下的耦合模理论。耦合系数包括偏振耦合项和双折射耦合项。并用马卡提里近似下的模式作为零级近似。用一级微扰法计算了折射率渐变分布的钛扩散铌酸锂矩形波导的传播常数。在给定参数的情况下，得到双折射项引起的传播常数的改变约为主微扰项的3%，因此双折射耦合对钛扩散铌酸锂矩形波导的性能影响不可忽略，这对设计和分析与它相关的光波导器件具有指导意义。     

Bi_4Ti_3O_(12)薄膜的结构与形貌分析

采用金属与金属氧化物复合靶的射频溅射法,在S_1,Au,Pt和Ti基片上沉积制备Bi_4Ti_3O_(12)(BTO)铁电薄膜,对不同基片沉积的BTO薄膜,以及不同退火温度下的薄膜的相结构、成分及形貌进行了分析。结果表明,BTO薄膜的结构与退火温度和沉积基片有关,不同基片上钙钛矿结构形成的温度按T_t相似文献   

Spectral noise analysis of Er3+:Ti:LiNbO3 curved waveguide amplifiers

We report simulations concerning optical amplification in Er:Ti:LiNbO₃ curved waveguides. The derivation and the evaluation of the spectral optical gain, the spectral noise figure, the amplified spontaneous emission photon number, and the signal to noise ratio are performed under the small gain approximation. The simulations show the evolution of these parameters under various pump regimes, Er concentration profiles and waveguide lengths. The results obtained are of significant interest for the design of complex, rare earth-doped integrated optics structures involving bent waveguides.