Nonlinear rheological behavior of silica filled solution‐polymerized styrene butadiene rubber

The reinforcement and nonlinear viscoelastic behavior have been investigated for silica (SiO₂) filled solution‐polymerized styrene butadiene rubber (SSBR). Experimental results reveal that the nonlinear viscoelastic behavior of the filled rubber is similar to that of unfilled SSBR, which is inconsistent with the general concept that this characteristic comes from the breakdown and reformation of the filler network. It is interesting that the curves of either dynamic storage modulus (G′) or loss tangent (tan δ) versus strain amplitude (γ) for the filled rubber can be superposed, respectively, on those for the unfilled one, suggesting that the primary mechanism for the Payne effect is mainly involved in the nature of the entanglement network in rubbery matrix. It is believed there exists a cooperation between the breakdown and reformation of the filler network and the molecular disentanglement, resulting in enhancing the Payne effect and improving the mechanical hysteresis at high strain amplitudes. Moreover, the vertical and the horizontal shift factors for constructing the master curves could be well understood on the basis of the reinforcement factor f(φ) and the strain amplification factor A(φ), respectively. The surface modification of SiO₂ causes a decrease in f(φ), which is ascribed to weakeness of the filler–filler interaction and improvement of the filler dispersion. However, the surface nature of SiO₂ hardly affects A(φ). © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2594‐2602, 2007     

Magnetic silica colloids for catalysis

Monodisperse magnetizable colloidal silica particles in a stable dispersion have been functionalized with a homogeneous catalyst: a PCP–pincer Pd-complex. In a proof-of-principle experiment we demonstrate the catalytic activity of the colloids in a C–C bond formation reaction. Advantages of the magnetic silica carriers are the large surface-to-volume ratio and the easy recovery by magnetic separation. After magnetic separation, the catalyst-loaded particles are readily redispersed for further use.     

Thickness of a silica-tethered poly(ethylene oxide) layer measured by spin labeling

EPR spectroscopy of labeled poly(ethylene oxide) (PEO) grafted on silica has been used to characterize the conformation and local dynamics of the chains. Grafted molecules of MW 2000 with grafting ratios of 0.045, 0.057, 0.126, and 0.42 molecules/nm² were in contact with benzene. The mobility of the label was compared with that observed for solution of PEO from very diluted to highly concentrated and even bulk PEO. Thus, the concentration inside the grafted layer could be evaluated and also the thickness, which evolves rather linearly with the grafting ratio. © 1995 John Wiley & Sons, Inc.     

Preparation and characterization of mesoporous silica thin films from polyethoxysiloxanes

Tetraethoxysilane (TEOS) and polyethoxysiloxanes (PEOSs; prepared by the acid‐catalyzed hydrolytic polycondensation of TEOS) were subjected to the sol–gel process in the presence of cetyltrimethylammonium bromide (CTAB), respectively. The PEOSs with M_w 700–26,000, as prepared by sol–gel coating of TEOS and PEOS under various conditions, were used. Uniform and crack‐free thin films of thickness 276–613 nm were prepared by spin‐coating of a PEOS solution containing CTAB. When the coating films were sintered at 400 °C, the combustion of ethoxy groups and CTAB took place to provide porous silica thin films. The structure of the thin films was found to be dependent on the molecular weight of PEOS and the molar ratio of CTAB/Si: lamellar or hexagonal phase was observed for M_w less than 15,000 and for CTAB/Si molar ratios greater than 0.10. Honeycomb structures were observed for M_w less than 5000 and for CTAB/Si molar ratios of 0.15. The honeycomb structure was also observed by atomic force microscopy and transmission electron microscope. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2542–2550, 2006     

纳米二氧化锆制备过程的DSC、TGA和XRD研究

用ＤＳＣ、ＴＧＡ和ＸＲＤ技术研究了在沉淀法制备纳米ＺｒＯ２的过程中，残留ＮＨ４Ｃｌ、ｐＨ值、滴加方式、以及结构稳定剂Ｙ２Ｏ３的添加量对结晶过程的影响。结果表明，残留ＮＨ４Ｃｌ使结晶化温度降低，使放热过程变为吸热过程。而ｐＨ值、滴加方式和结构稳定剂的添加对结晶过程无明显影响。     

甲酰胺对有序介孔二氧化硅形貌的影响

At room temperature and in acidic solution, ordered mesoporous silicas with particular morphology were synthesized using cetylpyridinium chloride as the template and formamide as the cosolvent. Scanning electron microscope (SEM), small angle X-ray diffraction (SXRD), and nitrogen adsorption techniques were used to characterize the as-synthesized and calcined samples. Results showed that the samples had hexagonal mesostructure analogous to MCM-41 and relatively narrow pore-size distributions (BJH). Besides, BET surface areas of the samples were in the range of 1 000～1 250 m²·g^-1 and high total pore volumes were up to 1.367 cm³·g^-1. Addition of formamide affected obviously mesostructures and the morphology of the mesoporous silica. Furthermore, with the increase of the concentration of formamide, the unit-cell constant decreased and particle shape changed from gyroids to fibers.     

Photografting of vinyl polymers onto ultrafine inorganic particles: Photopolymerization of vinyl monomers initiated by AZO groups introduced onto these surfaces

The photografting of polymers onto ultrafine inorganic particles, such as silica and titanium oxide, initiated by azo groups introduced onto these surfaces was investigated. The introduction of azo groups onto the particles was achieved by the reaction of 4,4′-azobis(4-cyanopentanoic acid) with surface isocyanate groups, which were introduced by the treatment with tolylene 2,4-diisocyanate. It was found that the photopolymerization of vinyl monomers, such as methyl methacrylate (MMA), styrene, and N-vinylcarbazole, is initiated by ultrafine particles having azo groups. The corresponding polymers were effectively grafted onto these surfaces through the propagation of the polymer from the surface radicals formed by the photodecomposition of the azo groups: e.g., the percentage of grafting of PMMA and polystyrene onto silica was reached to 112 and 176%, respectively. The percentage of grafting onto silica in the graft polymerization initiated by photodecomposition of surface azo groups was much larger than that initiated by thermal decomposition. Polymer-grafted ultrafine particles thus obtained gave a stable colloidal dispersion in good solvents for the grafted chain. © 1994 John Wiley & Sons, Inc.     

立方介孔相含钇氧化硅的合成与表征

以低浓度的十六烷基三甲基溴化铵为结构导向剂,在碱性条件下通过水热法合成了具有立方结构的含钇Y MCM 48介孔分子筛材料。XRD测试表明当Y/Si<0.05时可以获得典型的长程有序介孔立方结构相,随Y/Si比的增加,晶胞参数的增大和红外吸收光谱(FTIR)的变化为Y进入介孔分子筛骨架中提供了有力证据。N2吸附-脱附实验给出这种立方介孔材料的BET表面积为1180m2·g-1,BJH平均孔径为3.4nm。紫外 可见漫反射光谱(UV vis)证明钇以一种六配位的形式存在。X射线光电子能谱(XPS)进一步证明钇以三价形式存在于立方介孔分子筛骨架中。     

Synthesis of novel mesoporous silica spheres with starburst pore canal structure

Novel spherical mesoporous silica materials with uniform diameters and starburst mesopore structures were synthesized by a simple one-step procedure with ethanol as the co-solvent in dilute aqueous solution and their formation mechanism was proposed. The arrangement of the pore canal and the diameter of the sphere could be tailored by altering the concentration of ethanol.     

ESR study of products of transformation of 3,6-tert-butylpyrocatechol on alumina, zinca, silica, and titania

The formation of semiquinone and phenoxazyl radicals and metallocomplexes with semiquinone ligands was observed by ESR during the interaction of di-tert-butylpyrocatechol with Al₂O₃, ZnO, SiO₂, and TiO₂. In the case of different modifications of SiO₂, admixtures of TiO₂ exhibit a higher reactivity in complex formation with the organic substrate. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1975–1978, October, 1998.