手性钯络合物催化下2-硝基环酮的不对称烯丙基化反应

在用氮杂冠醚改良的手性二茂铁膦与钯的络合物催化下, 2-硝基环酮可进行不对称烯丙基化反应. 讨论了配位基的形状, 反应物的构造, 碱的类型以及反应时间对反应速率和立体选择性的影响. 通过增加反应的空间位阻改进了反应的立体选择性 .     

The high-temperature durability of Rh-free threeway catalysts used for automoble emission control

The high-temperature durability of cordierite honeycomb Rh-free three-way catalysts (TWC) containing additives has been studied by calcining catalysts at various temperatures in the interval of 600≈1100°C. The three-way performances of these catalysts were evaluated for the reaction of carbon monoxide(CO), hydrocarbon(HC) and nitrogen oxides(NOx) at given conditions by using a fixed bed reactor. The results show that after Rh-free TWC are thermally aged in air at 1100°C for 5h and 950°C for 104 h, the TWC still have better three-way activity compared with Rh-containing TWC.     

Dawson型磷钨酸催化合成乳酸月桂醇酯

用Dawson型磷钨酸催化合成乳酸月桂醇酯。实验结果表明:Dawson型磷钨酸有较高的催化活性,反应时间短,酯收率高,工艺简单。最佳工艺条件为:醇/酸摩尔比为1.5:1,催化剂用量为0.3%,带水剂甲苯体积(mL)与反应物质量(g)之比为0.4:1~0.5:1,反应温度为115~140℃,反应时间30~50min。在此条件下,酯收率可超过93% 。     

Kinetics of Hydroperoxide Epoxidation of 1-Octene in the Presence of MoB2

We have studied the kinetics of the process of epoxidation of 1-octene by tert-butyl hydroperoxide in the presence of molybdenum boride MoB₂. We have studied the effect of the concentrations of starting materials and reaction products on the process. We suggest a kinetic scheme and we calculate the kinetic parameters of the process.     

煤炭液化复合铁系催化剂的研究

用微型高压釜,以杂酚油为溶剂,在反应温度400℃,氢初压6.08MPa,反应时间30分钟的条件下,研究了多种含铁矿物质、复合铁系催化剂对煤炭液化的催化效果。并用高压DTA技术进一步证实了复合铁系催化剂的良好液化加氢活性。     

担载液相催化剂的研究——Ⅳ.催化剂的原位红外光谱表征

本文利用原位红外光谱方法对铑基担载液相催化剂(SLPC)在接近于实际反应条件下进行了表征。结果表明,新鲜催化剂上,铑膦络合物主要以二聚物的形式存在,如Rh_2(CO)_2(PPh_3)_4而在合成气或反应气氛中,催化剂铑膦络合物以单核络合物HRh(CO)_2(PPh_3)_2的形式存在。文中还对SLPC在CO,H_2,C_2-H_4,空气和HCl中处理时铑络合物种的变化进行了原位观察。实验结果表明,SLPC上活性铑络合物与对应的均相过程完全一致,进一步证实了SLPC催化在微观上就是一个均相催化过程。     

Novel type of heterogenized CuCl2 catalytic systems for oxidative carbonylation of methanol

A novel type of heterogenized CuCl₂ catalysts was designed for the oxidative carbonylation of methanol to dimethyl carbonate (DMC) taking account of the plausible reaction mechanism and intermediates. To prevent severe corrosion of the reaction equipment materials due to Cl^– while keeping the catalytic activity of the homogeneous CuCl₂ catalyst, we adopted, as supports (or ligands) of CuCl₂, four polymers, bearing a 2,2-bipyridine (bpy) or pyridine (py) unit, namely, poly(2,2-bipyridine-5,5-diyl) (Pbpy), poly(pyridine-2,5-diyl) (Ppy), poly(N,N-bisphenylene-2,2-bipyridine-4,4-dicarboxylic amide) (Bpya), and poly(4-methyl-4-vinyl-2,2-bipyridine) (Pvbpy), together with one chelate compound, 8-quinolinol. The catalytic activity, stability of heterogenized CuCl₂ and their corrosivities to stainless steels were examined in the liquid-phase reaction of the oxidative carbonylation of methanol. These polymer-supported catalysts showed considerable catalytic activity and stability for the DMC synthesis. In particular, the Pbpy-CuCl₂ and Ppy-CuCl₂ catalysts exhibited high DMC yields and selectivity comparable to those of the homogeneous CuCl₂ catalyst. This high activity appears to be associated with the presence of the -conjugated system in the polymers, which affect the redox reactions of Cu involved in the catalytic reaction. All of the polymer-supported CuCl₂ catalysts could be easily recycled after filtration, and the initial catalytic activity was maintained after three times of use. The corrosive characters of the catalysts were closely related to CuCl₂ leaching from the supports, which reflects the ability of supports to coordinate Cu. These experimental results suggest that both the electronic structure and the coordination ability of the polymer supports are key factors for the development of an effective catalytic system.     

烯烃氢甲酰化催化剂活性物种的原位~1H NMR研究

有机磷配位铐或钴联基配合物是生产难或醇的工业催化剂，一般公认金属氢化物是反应的催化活性物种．通常反应活性物种仅存在干反应状态下，其结构表征非常困难，在许多研究中只能关联催化剂母体与其活性的关系［‘1；而未能揭示出催化的本质，给催化剂设计造成很大困难，因而对催化剂活性物种的直接表征受到普遍关注．B。wn问、Morrista］及本文作者研究组＊均采用加压原位红外光谱方法，在烯烃氢甲酸化反应条件下捕捉到HCO（CO）3L存在的信息·但用相同方法在反应条件下，在RhH键特征吸收谱带195O－2200Cm‘内未观测到错氢化物的Rh－…     

Highly efficient Wacker oxidation catalyzed by heterogeneous Pd montmorillonite under acid-free conditions

Palladium-montmorillonite was proven to be highly efficient for the Wacker oxidation of terminal olefins to the corresponding methyl ketones. The catalyst was reusable while maintaining high activity and selectivity.     

Facile preparation of organozinc bromides using electrogenerated highly reactive zinc and its use in cross-coupling reaction

Highly reactive zinc was readily prepared by electrolysis of a DMF solution containing pyrene as a mediator with a platinum cathode and a zinc anode. Preferential reduction of pyrene occurred to generate the corresponding radical anion, which reduced zinc ions generated from anodic dissolution to give zero valent zinc with high reactivity. The reactive zinc was successfully used for an efficient transformation of bromoalkanes into the corresponding organozinc bromides. Organozinc bromides obtained were further used successfully in Pd-catalyzed cross-coupling reaction with various aryl iodides and bromides.