Solar Photocatalytic Degradation of 4‐Chlorophenol in Kaolinite Catalysts

This research applies semiconductor photocatalysts, which are formed by metal ion exchange on the surface of kaolinite catalyst with cations, to the study of photocatalytic degradation of 4‐chlorophenol. The analysis results of catalyst properties shows that, after sintering at 400 °C, kaolinite catalyst has a particle size of between 10–100 nm indicating the nano level of synthesized catalysts. Under the same condition, kaolinite‐Ag/Zn catalyst works better in degradation efficiency than single kaolinite‐Ag and kaolinite‐Zn catalysts. Kaolinite‐Zn catalyst declines in degradation efficacy after 150 minutes and performs poorer than the other three types of kaolinite catalysts. In the experiments of different amounts of catalysts, when the concentration exceeds 0.1 wt%, utilization of light energy and degradation efficiency will be reduced due to shielding effect. When at different pH values, the higher the pH value, the more OH‐will be released and that is beneficial for reaction with substances and the increase of reaction rate. Finally multivariate analysis proves that there is one determining factor that influences the photocatalytic degradation of 4‐chlorophenol in kaolinite catalysts, named as “the factor with intermediates competition degree,” the one affecting the 4‐CP degradation at different weight percentages that is referred to as the “shielding effect factor.”     

铁催化剂在碳—氧反应中的热重研究

采用动态TG－DTG，研究了铁催化剂的制备方法、前驱化合物的 种类及 热处理对其在碳－氧反应中催化活性的影响。观察到在干混法制备催化剂时，所用铁盐分解温度越低活性越高。此外还发现，热处理可明显提高由分解温度高的含氧铁盐制备的 催化剂的活性，但对于不含氧铁盐和分解温度低的含氧铁盐无影响。     

CoMoK／γ—Al2O3水煤气变换催化剂的硫化及反硫化

以Ｈ２Ｓ和ＣＳ２作硫化剂，用ＰＰＳ和ＴＰＤＳ方法研究了水煤气变换催化剂ＣｏＭｏＫ／γ－Ａｌ２Ｏ３的硫化及反硫化过程。用Ｈ２Ｓ／Ｈ２硫化时，只发现Ｈ２Ｓ的消耗和Ｈ２Ｏ的生成，用ＣＳ２／Ｈ２硫化时，只发现Ｈ２Ｓ的消耗和Ｈ２Ｏ的生成。用ＣＳ２／Ｈ２硫化时，首先生成ＣＯ２，然后是ＣＨ４，Ｈ２Ｏ和Ｈ２Ｓ，ＴＰＧ实验表明催化剂表面上积炭，造成催化剂和活性降低，但积炭在水煤变换反应进行了逐渐除法。ＴＰＤＳ实验表     

An attempt on the VOC oxidation using mechanically activated catalyst

A catalytic action of the mechanochemical products of copper hydroxocarbonate with calcium carbonate was investigated in n-butyl alcohol oxidation tests. The solid products of high-energy milling were identified using thermogravimetry supplemented by X-ray diffraction method. It was shown that the mechanical activation induces more effective tested catalyst because it promotes the alcohol conversion at lower temperatures than that unmilled one. This revised version was published online in July 2006 with corrections to the Cover Date.     

丙酮一步法合成甲基异丁基酮催化剂研究

用浸渍法制备了丙酮一步法合成甲基异丁基酮负载型催化剂，考察了载体的预处理温度、添加镧助剂对催化剂性能的影响；用BET法测定了催化剂的表面积；采用H2-O2滴定法测定Pd的分散度．结果发现，用经过1．023K焙烧过的Al2O3为载体的催化剂具有较好的催化性能，添加镧助剂后催化剂的分散度、活性有较大的提高．     

用钛系载体高效催化剂进行乙烯-丙烯-1-丁烯三元共聚合的研究 Ⅰ.聚合条件对共聚合反应的影响

用多组份改性钛系载体催化剂TiCl_4,Ti(OBu)_4/MgCl_2/Ethylbenzeate(EB)/φ_2SiCl_2/AlEt_3进行了乙烯-丙烯-1-丁烯三元共聚合的研究。考察了单体进料比、聚合温度,烷基铝浓度和催化剂浓度等条件对共聚合的影响。发现本催化剂对乙丙丁三元共聚合有极高的催化效率,聚合1h达8.6×10~4g共聚物/g-Ti。共聚合速率衰减符合动力学方程:R_s=R_s+(R_0—R_s)_e~(βs)。     

乙苯脱氢铁系催化剂的穆斯堡尔谱研究

用穆斯堡尔法对乙苯脱氢铁系催化剂在反应条件下进行了研究。结果表明,反应前催化剂中的铁主要以α-Fe_2O_3和α-FeOOH的形式存在,在反应中主要组分为Fe_3O_4。用K_2CO_3和α-Fe_2O_3在高温下加热可以生成KFeO_2,后者在室温下很不稳定,在同样条件下很容易转化为Fe_3O_4。但钾的存在可促进催化剂中Fe~(3+)还原为Fe~(2+),有利于电子的交换,对催化活性起着助催作用。     

Diffusion Mechanisms of Zeolite Catalysts

The diffusion mechanisms within zeolite catalysts, such as resistance to diffusion at pore mouths, configurational diffusion, adsorption-controlled diffusion, influence of co-existing molecules and pore blocking, were overviewed. Two kinds of diffusivities, the intracrystalline diffusivity and the effective diffusivity, were discussed separately to clarify the diffusion mechanism.     

Ce-Zr-Ba-O纳米材料的制备及其结构与性能研究

以金属硝酸盐为原料,分别采用高分子前驱体法、柠檬酸盐凝胶法制备了纳米级的Ce-Zr-Ba-O复合氧化物超细粒子,采用X-射线衍射(XRD)、透射电镜(TEM)、BET比表面测定、热重-差热(TG-DTA)技术对催化剂进行了表征,并考察了催化剂的CO氧化活性和热稳定性。实验结果表明,高分子前驱体法和柠檬酸盐凝胶法制备的催化剂粉体都达到了纳米级。两种方法中,高分子前驱体法所制得的催化剂的BET比表面达118.96m²·g^-1,CO氧化反应活性较高,同时该方法制得的催化剂分散性好,无团聚,经1000℃高温焙烧后仍基本无烧结、无团聚现象,具有较高的热稳定性。     

V_2O_5/C催化氧化乙二醛制备乙醛酸

利用等体积浸渍法制备了V2O5/C催化剂,并应用于乙二醛的液相氧化反应,采用XRD、TEM手段对催化剂进行了物化性质表征.结果表明,V2O5/C对乙二醛的氧化表现出较高的催化活性和乙醛酸选择性,反应10h,乙二醛的转化率达29.2%,乙醛酸得率13.6%.与贵金属Pd-Bi/C催化剂相比,V2O5/C催化剂的稳定性和重复使用效果都比较好.