电子自旋共振准三维图象的重建方法

根据投影切片原理, 设计了一个简单而有效的ESR图象重建算法和程序, 可利用样品的一集ESR谱, 方便地绘制出样品在某截面的自旋密度立体轮廓图、等值图和散点密度分布图等, 为分析和研究自旋密度的分布及其性质, 提供了直观依据。作为应用, 文中给出了石英杜瓦受紫外光辐照后产生的局部晶格缺陷——F心的空间分布图, 图中清楚表明, F心的浓度与辐照方向和辐照强度的密切关系, 与试验结果完全相符。     

Electron microscope study of viscoelastic cationic surfactant systems

Some cationic surfactants such as cetyltrimethylammonium bromide (CTAB) show a very spectacular viscoelasticity in solution, in even very diluted states, with some aromatic substances added, such as salicylic acid. Formerly, the authors established that the remarkable solution behaviour was the result of the entanglement of such enormously elongated giant micelles, based on recognition of the existence of large aggregates, through direct observation of them as substantial images under the electron microscope.In this report, we further confirm the relation between micelle length and solution viscoelasticity after arbitrarily obtaining different size aggregates by altering the media pH, or by admixing shorter chain length surfactants than CTAB, which alone did not induce viscoelasticity.     

Characterisation of the Kratos Axis Ultra with spherical mirror analyser for XPS imaging

The imaging performance of an XPS instrument employing a spherical mirror electron energy analyser has been characterised by measuring the peak position, full width at half maximum (FWHM), and lineshape, at every pixel in the image, for different modes of operation. Changes in these parameters have been identified and recommendations made for quantification of, and chemical state determination from, spectrum image data sets. Copyright © 2006 John Wiley & Sons, Ltd.     

Exact electronic properties in the classically forbidden region of a metal surface

We derive exact properties of the inhomogeneous electron gas in the asymptotic classically forbidden region at a metal–vacuum interface within the framework of local effective potential energy theory. We derive a new expression for the asymptotic structure of the Kohn–Sham density functional theory (KS‐DFT) exchange‐correlation potential energy v_xc(r) in terms of the irreducible electron self‐energy. We also derive the exact asymptotic structure of the orbitals, density, the Dirac density matrix, the kinetic energy density, and KS exchange energy density. We further obtain the exact expression for the Fermi hole and demonstrate its structure in this asymptotic limit. The exchange‐correlation potential energy is derived to be v_xc(z → ∞) = ?α_KS,xc/z, and its exchange and correlation components to be v_x(z → ∞) = ?α_KS,x/z and v_c(z → ∞) = ?α_KS,c/z, respectively. The analytical expressions for the coefficients α_KS,xc and α_KS,x show them to be dependent on the bulk‐metal Wigner–Seitz radius and the barrier height at the surface. The coefficient α_KS,c = 1/4 is determined in the plasmon‐pole approximation and is independent of these metal parameters. Thus, the asymptotic structure of v_xc(z) in the vacuum region is image‐potential‐like but not the commonly accepted one of ?1/4z. Furthermore, this structure depends on the properties of the metal. Additionally, an analysis of these results via quantal density functional theory (Q‐DFT) shows that both the Pauli W_x(z → ∞) and lowest‐order correlation‐kinetic W(z → ∞) components of the exchange potential energy v_x(z → ∞), and the Coulomb W_c(z → ∞) and higher‐order correlation‐kinetic components of the correlation potential energy v_c(z → ∞), all contribute terms of O(1/z) to the structure. Hence correlations attributable to the Pauli exclusion principle, Coulomb repulsion, and correlation‐kinetic effects all contribute to the asymptotic structure of the effective potential energy at a metal surface. The relevance of the results derived to the theory of image states and to KS‐DFT is also discussed. © 2005 Wiley Periodicals, Inc. Int J Quantum Chem, 2005     

Sampling and local models for multivariate image analysis

Local models are a very important concept for microscopic and macroscopic imaging. Different methods of sub-sampling a multivariate image are described both in general and for three examples. The need for sub-sampling and its influence on multivariate image analysis and visualization are studied. Examples from MRI (256 × 256), satellite imaging (7 × 512 × 512) and biofuel studies (6 × 512 × 512) are used to illustrate some of the principles involved.     

Comparative study of catalytic activity of Pd loaded hydroxyapatite and fluoroapatite in butan-2-ol conversion and methane oxidation

Palladium loaded calcium-hydroxyapatite, Pd(z)/CaHAp, and calcium-fluoroapatite, Pd(z)/CaFAp, were synthesised and characterised by TEM, XRD, IR and UV–vis–NIR spectroscopies. Introduction of palladium does not change the structure of CaHAp and CaFAp. The average size of PdO particles was found to be around 4–5 nm on Pd(1)/CaHAp but larger (6–7 nm) on Pd(1)/CaFap. The acid–base properties of the supports and of the catalysts were studied using butan-2-ol conversion. On CaHAp and CaFAp, the butenes yield (dehydration reaction) is very low either in the absence or in the presence of oxygen. The methyl ethyl ketone yield (dehydrogenation reaction) is significant only in the presence of oxygen and higher over CaFAp. Conversely, the performances of Pd(z)/CaHAp are better than those of Pd(z)/CaFAp below 180 °C. Above 180 °C, buta-2-ol combustion is favoured on Pd/CaHAp but not on Pd/CaFAp.

In methane oxidation, Pd(z)/CaHAp showed also a much larger activity than Pd(z)/CaFAp. On 2 wt% Pd loaded CaHAp, the methane oxidation reaches a conversion of almost 100% at 350 °C, which is comparable with the performance of conventional Pd/Al₂O₃ catalysts. The reducibility of PdO under methane–oxygen mixtures is lower on Pd(z)/CaHAp. For both reactions, the lower activity of Pd(z)/CaFAp is related to its higher acidity, resulting from the substitution of OH⁻ by F⁻, and to the larger PdO particle size.     

成像技术在食品安全与质量控制中的研究进展

食品质量与安全是政府、食品行业以及消费者十分关注的问题。为了保证食品质量与安全，需要对食品中的风险因子进行检测。传统的分析方法如生物化学方法和仪器分析方法（色谱法、色谱-质谱法）存在前处理比较复杂，耗时，对样品具有破坏性及无法获取目标物空间信息等缺点。因此，开发快速，无损，实时和可视化的检测技术十分重要，这也是食品领域研究的热点。近年来，高光谱成像技术融合了成像和光谱两种技术，可以作为一种用于食品质量和安全评估的非破坏性和实时检测的工具。拉曼光谱成像技术可以同时获得待测物的光谱和空间信息，具有快速，无损和低成本等优点，在食品安全评价和质量控制中也得到了成功应用。质谱成像技术不需要标记和染色，即可实现样品组织表面待测物的可视化和高通量分析。它作为一种分子可视化技术，可以获得食品中营养成分及内、外源性有害物质的空间分布信息，在食品领域也表现出良好的应用前景。本文检索了近几年国内外发表的成像技术在食品研究中的相关文献，介绍了高光谱成像技术、拉曼光谱成像技术和质谱成像技术的原理，并综述了它们在食品安全与质量控制中的应用。此外，本文分析和讨论了这几种成像技术的优缺点，并对成像技术在食品领域的发展前景做出了展望。     

Synthesis and characterisation of bis(pentafluorophenyl)antimony(V) cations, [(C6F5)2SbL3]

Pentacoordinate complex cations of the general formula [(C₆F₅)₂SbL₃]³⁺ stabilized as solid salts in combination with tetraphenylborate (BPh₄), tetrafluorobroate (BF₄) anions, where L=DMSO, Ph₃AsO, PyO, DMF, α-, β- and γ-picoline have been isolated. The newly formed complexes were characterized by elemental analysis, molar conductance measurements, solid-state IR and and NMR. From these results, a five-fold coordination around antimony was required.     

NaBr对C12-s-C12•2Br/氯仿体系中反胶团增溶水能力的影响

近红外(NIR)光谱技术可用于表征氯仿体系中反胶团增溶水的能力. 对于C12-s-C12•2Br (s=2, 3, 4, 5, 6, 8)系列, 不论体系是否含有NaBr电解质, 由于具有较短联接链的表面活性剂易形成较大的反胶团, 其增溶水的能力随着联接链长度增加而降低. 与未含NaBr电解质的体系相比, 当体系中存在NaBr电解质时所形成的反胶团增溶水能力降低.     

SiO2包覆纳米CaCO3的透射电镜表征

在透射电子显微镜（TEM）电子衍射模式下，用适当孔径的物镜光阑选择非晶态SiO2的衍射区域，拍摄以溶胶一凝胶法制备的SiO2包覆纳米CaCO3的暗场像。与未经包覆SiO2的纳米CaCO3的暗场像作对比，可以看出经过SiO2包覆的纳米CaCO3粒子周围有一白色亮环，从而得到SiO3包覆层的暗场照片。用高分辨方法观察了包覆层与CaCO3粒子间的界面情况。