Synthesis,Structure and Near-infrared Luminescence of a Dinuclear Ytterbium（Ⅲ） Complex with a Bis（2,2＇-bipyridyl） Ligand

The title complex {Yb（hfac）3}2（bpyC≡CC6H4C≡Cbpy） （hfac = hexafluoroacetyl- acetonate,bpyC≡CC6H4C≡Cbpy=2-（pyridin-2-yl）-5-（2-（4-（2-（6-（pyridin-2-yl）pyridin-3-yl）ethynyl）- phenyl）ethynyl）pyridine） has been prepared and characterized by X-ray crystallography. It crystallizes in the monoclinic space group P21/c with a = 17.240（16）, b = 25.64（2）, c = 16.481（15）A, β = 93.469（9）°, V = 7271（12）A^3, Z = 4, Mr = 2022.91, F（000） = 3888, Dc = 1.848 g/cm^3 and μ（MoKα） = 2.708 mm^-1. The structure was refined to R = 0.0714 and wR = 0.1762 for 9771 observed reflections （I 〉 2σ（I））. Sensitized near-infrared （NIR） luminescence from YbIII centers was achieved through efficient antenna effect or energy transfer from the bridging ligand chromophore.     

Effect of POSS on crystalline transitions and physical properties of polyamide 12

Polyamide 12/Trisilanolphenyl‐POSS (PA 12/POSS) composites were prepared via melt‐compounding. The effect of polyhedral oligomeric silsesquioxane (POSS) on crystalline structure and crystalline transition of PA 12 was investigated by wide‐angle X‐ray diffraction (WAXD) and real time fourier transform infrared spectroscopy (FTIR). WAXD results indicated that PA 12 crystallized into γ‐form as slowly cooling from melt and the presence of POSS did not influence the crystalline structure of PA 12. Both PA 12 and PA 12/POSS composites underwent Brill transitions when they were heated from room temperature to melt point. Real time FTIR patterns showed that an absorption band at 697 cm^?1 ascribed to Amide V (α) mode was emerged along with the disappearance of Amide VI (γ) band at 628 cm^?1 with the increase of the temperature for PA 12 and PA 12/POSS composites, which suggested that the γ‐form crystalline has transformed into α form. The Brill bands were identified and the transformed mechanism was discussed based on the real FTIR results. The addition of POSS enhanced the tensile strength and thermal stability of PA 12. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 121–129, 2009     

Partitioned partial least squares regression with application to a batch fermentation process

The performance of Partial Least Squares regression (PLS) in predicting the output with multivariate cross‐ and autocorrelated data is studied. With many correlated predictors of varying importance PLS does not always predict well and we propose a modified algorithm, Partitioned Partial Least Squares (PPLS). In PPLS the predictors are partitioned into smaller subgroups and the important subgroups with high prediction power are identified. Finally, regular PLS analysis using only those subgroups is performed. The proposed Partitioned PLS (PPLS) algorithm is used in the analysis of data from a real pharmaceutical batch fermentation process for which the process variables follow certain profiles during a specific fermentation period. We observed that PPLS leads to a more accurate prediction of the yield of the fermentation process and an easier interpretation, since fewer predictors are used in the final PLS prediction. In the application important issues such as alignment of the profiles from one batch to another and standardization of the predictors are also addressed. For instance, in PPLS noise magnification due to standardization does not seem to create problems as it might in regular PLS. Finally, PPLS is compared to several recently proposed functional PLS and PCR methods and a genetic algorithm for variable selection. More specifically for a couple of publicly available data sets with near infrared spectra it is shown that overall PPLS has lower cross‐validated error than PLS, PCR and the functional modifications hereof, and is similar in performance to a more complex genetic algorithm. Copyright © 2011 John Wiley & Sons, Ltd.     

Role of Polyalanine Domains in β‐Sheet Formation in Spider Silk Block Copolymers

Genetically engineered spider silk‐like block copolymers were studied to determine the influence of polyalanine domain size on secondary structure. The role of polyalanine block distribution on β‐sheet formation was explored using FT‐IR and WAXS. The number of polyalanine blocks had a direct effect on the formation of crystalline β‐sheets, reflected in the change in crystallinity index as the blocks of polyalanines increased. WAXS analysis confirmed the crystalline nature of the sample with the largest number of polyalanine blocks. This approach provides a platform for further exploration of the role of specific amino acid chemistries in regulating the assembly of β‐sheet secondary structures, leading to options to regulate material properties through manipulation of this key component in spider silks.

     

Long-lasting near-infrared persistent luminescence from β-Ga2O3:Cr nanowire assemblies

Near-infrared (NIR) persistent luminescent β-Ga₂O₃:Cr³⁺ nanowire assemblies were synthesized by a hydrothermal process followed by calcination. The phosphor exhibits more than 4 h afterglow in the wavelength range of 650-850 nm after ceasing the ultraviolet light (280-360 nm) irradiation. The trap structure and persistent luminescence mechanism were revealed by thermoluminescence measurement. The β-Ga₂O₃:Cr³⁺ nanowire assemblies may find applications as identification taggants in security and optical probes in bio-imaging.     

近红外光谱法预测粗皮桉木材气干密度的影响因素分析

采用近红外光谱分析技术,对粗皮桉木材气干密度校正模型的影响因素进行比较研究.使用直接测量法测量了粗皮桉木材的气干密度,并用近红外光谱仪采集试样的近红外漫反射光谱,对不同切面、厚度、含水率和粗糙度的粗皮桉木材试样的原始光谱进行二阶导数预处理并选择一定光谱段建立回归模型.以50～140个试样作为校正集建立木材气干密度的偏最...     

Optical characterization of polycarbonate: Influence of additives on optical properties

In laser transmission welding of thermoplastics the optical properties of the joining parts determine the quality of the welding result. Especially, the scattering of laser radiation in the transparent welding part has an impact on weld seam properties. This scattering is caused by additives. For polycarbonate (PC) with different additives the transmittance, the reflectance and the collimated transmittance are measured with a UV‐VIS‐NIR spectrometer. From this data, the optical properties, such as scattering coefficient, absorption coefficient, and anisotropy factor are calculated. The calculations are made with the aid of the four‐flux model of radiation transport in the diffusive approximation. The results show that the additives have a significant influence on the scattering coefficient. For most additives under consideration the scattering is forward directed, which means that most of the radiation is transmitted into the absorbing welding part. However, the power density distribution of the transmitted radiation may differ significantly from PC without additives. So, the weld seam may also differ due to different additives. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 451–455, 2010     

Novel Method for Preparing NH4NiPO4·6H2O: Hydrogen Bonding Coacervate Selective Self-assembly

The single phase NH₄NiPO₄·6H₂O was synthesized by solid‐state reaction at room temperature using NiSO₄·6H₂O and (NH₄)₃PO₄·3H₂O as raw materials. The NH₄NiPO₄·6H₂O and its calcined products were characterized using X‐ray powder diffraction (XRD), thermogravimetry and differential thermal analyses (TG/DTA), Fourier transform IR (FT‐IR), ultraviolet‐visible (UV‐vis) absorption spectroscopy, and scanning electron microscopy (SEM). The results showed that the product dried at 80°C for 3 h was orthorhombic NH₄NiPO₄·6H₂O [space group Pmm2(25)], and surfactant polyethylene glycol (PEG)‐400 can direct growth of crystal NH₄NiPO₄·6H₂O. The thermal process of NH₄NiPO₄·6H₂O experienced three steps, which involve the dehydration of the five crystal water molecules at first, and then deamination, dehydration of the one crystal water, intramolecular dehydration of the protonated phosphate groups together, at last crystallization of Ni₂P₂O₇. The product of thermal decomposition at 150°C for 2 h, orthorhombic NH₄NiPO₄·H₂O, is layered compound with an interlayer distance of 0.8370 nm.