Feasibility study for the use of near infrared spectroscopy in the qualitative and quantitative analysis of green tea, Camellia sinensis (L.)

This paper indicates the possibility to use near infrared spectroscopy (NIR) combined with PLS as a rapid method to estimate the quality of green tea. NIR is used to build calibration models to predict the content of caffeine, epigallocatechin gallate (EGCG) and epicatechin (EC) and for the prediction of the total antioxidant capacity of green tea. For the determination of the total antioxidant capacity, the trolox equivalent antioxidant capacity (TEAC) method is used. Until now, the prediction of the antioxidant capacity as such by use of NIR has not been reported. For caffeine and TEAC, models are build for the whole green tea leaves and also for the ground leaves. For the polyphenols (EGCG and EC), only models for the whole leaves are investigated. A partial least squares (PLS) algorithm is used to perform the calibration. To decide upon the number of PLS factors included in the PLS model, the model with the lowest root mean square error of cross-validation (RMSECV) for the training set is chosen. The correlation coefficient (r) between the predicted and the reference results for the test set is used as an evaluation parameter for the models: for the TEAC results r=0.90 for the model with the whole leaves, r=0.86 for the model with the powdered leaves are obtained. The caffeine prediction model has a correlation coefficient r=0.96 for the whole leaves and r=0.93 for the ground leaves. The correlation coefficient for the EGCG and the EC content models are, respectively 0.83 and 0.44.     

Quantum chemical study of several monocyclic complex β‐lactam C‐3, C‐4, and N‐derivatives,and β‐ring model molecules

A quantum chemical study of several complex monocyclic 4‐benzoyl‐4‐phenyl‐β‐lactam derivatives was carried out using cyclobutane, azetidine, 2‐azetidinone, 1‐methyl‐2‐azetidinone, and 3‐methyl‐2‐azetidinone as model compounds. The optimum geometry was obtained for the different conformations. The planarity of the ring was discussed in terms of the influence of the substituents on the amide resonance. To better analyze the amide resonance and the activity of the β‐lactam ring, a vibrational study was also carried out. To examine the influence of solvent polarity on the carbonyl bands, the Fourier transform–infrared (FT‐IR) spectra of the β‐lactam monocyclic derivatives were recorded in CCl₄, C₆H₆, and CHCl₃ solutions. The normal vibrations of the β‐lactam ring in the model compounds were characterized and used in the analysis of the β‐ring of more complex derivatives. © 2002 Wiley Periodicals, Inc. Int J Quantum Chem, 2002     

The phonon-assisted proton transfer between hydrazinium cations in (N2H5)2HMF6·2H2O (M∈{Ga, Al, Fe}) type compounds. FT IR and quantum theoretical study

FT IR spectra of a series of compounds with a general formula (N₂H₅)₂HMF₆·2H₂O (where M∈{Ga, Al, Fe}) were recorded at variable temperatures (from ∼100 to 300 K, at 10 K intervals). The appearance of the spectral region of ν(N-N) modes due to hydrazinium cations further supports the conclusions regarding the N₂H₅⁺?H⁺?N₂H₅⁺ hydrogen bond potential well based on Raman spectroscopic data [J. Raman Spectrosc. 28 (1997) 315]. The appearance of two bands corresponding to the ν(N-N) modes in the low temperature FT IR spectra that merge into one upon heating is a clear evidence of a symmetric potential well through which a phonon-assisted proton transfer (PAPT) occurs at higher temperatures. Ab initio MP2/6-311++G(2d,p) quantum chemical study of the proton transfer potential within the N₂H₅⁺?H⁺?N₂H₅⁺ cluster confirmed its double-minimum character. The first-order saddle point found on the MP2/6-311++G(2d,p) potential energy hypersurface corresponds to a centrosymmetric structure (C_2h symmetry), with the proton placed at the inversion center. The potential energy curve along the tunnelling coordinate was calculated by the intrinsic reaction coordinate (IRC) methodology, leading to an adiabatic PT barrier height of 3.94 kcal mol⁻¹ and a tunneling rate of 1.98 s⁻¹. The corresponding MP4(SDTQ)/6-311++G(2d,p)//MP2/6-311++G(2d,p) value of the adiabatic PT barrier height is 4.26 kcal mol⁻¹.     

Investigations on Preparation,Crystal Structure and Thermal Stability of Bis(O-ethylcarbonodithiolato-S,S′)(1,10-phenanthroline-N~1,N~(10))cobalt(II) Complex:[Co(Et-XA)_2·phen]·H_2O (XA=xanthate)

IntroductionTheincreasingcommercialvalueoftransitionmetalcomplexesofxanthateshasarousedconsiderableinterestintheirchemistry .Whiletheiranalyticalapplicationsarewellknown ,1theyarenowfindingextensiveuseinvulcan izationofrubber ,frothfloatationprocessforconcentrationofsulphideores ,asantioxidants ,lubricants ,2 ,3andhavebeenfoundtopossessfungicidalandinsecticidalactivi ties .4 Recently ,molecularrecognitionbetweenhostandguestmolecules ,inclusionphenomenaandnoncovalentmolecularinteractionarefunda…     

Synthesis,Characterization and Catalysis of Ce‐MCM‐41

The cerium‐containing MCM‐41 (Ce‐MCM‐41) has been synthesized by direct hydrothermal method. The low‐angle XRD patterns revealed the typical five major peaks of MCM‐41 type hexagonal structures. The interplanar spacing d₁₀₀ = 38.4 Å was obtained that can be indexed on a hexagonal unit cell parameter with a_o = 44.3 Å which was larger than that of pure siliceous MCM‐41 (Si‐MCM‐41). Transmission electron micrograph shows the regular hexagonal array of uniform channel characteristics of MCM‐41. The BET surface area of Ce‐MCM‐41 was 840 m²/g, which is much reduced as compared to that of Si‐MCM‐41, with the pore size of 26.9 Å and mesopore volume of 0.78 cm³/g were measured by nitrogen adsorption‐desorption isotherm at 77 K. Along with the results, the synthesized Ce‐MCM‐41 exhibited a well‐ordered MCM‐41‐type mesoporous structure with the incorporation of cerium. Using Ce‐MCM‐41 as a support, the Rh (0.5 wt%) catalyst exhibited very high activity for the NO/CO reactions.     

Binding of the bioactive component daphnetin to human serum albumin demonstrated using tryptophan fluorescence quenching

Daphnetin (7,8-dihydroxycoumarin), one of the major bioactive components isolated from Daphne koreane Nakai, has been used in traditional Chinese medicine for the treatment of coagulation disorders. It is also a chelator, an antioxidant and a protein kinase inhibitor. In this paper, a combination of intrinsic fluorescence, Fourier transform infrared (FT-IR) spectroscopy and circular dichroic (CD) spectroscopy has been used to characterize the binding between daphnetin and human serum albumin (HSA) under physiological conditions with drug concentrations of 6.7 x 10(-6) - 2.3 x 10(-5) mol x L(-1), and a HSA concentration of 1.5 x 10(-6) mol x L(-1). Changes in the CD spectra and FT-IR spectra were observed upon ligand binding, and the degree of tryptophan fluorescence quenching did change significantly in the complexes. These data have proved the change in protein secondary structure accompanying ligand binding. The change in tryptophan fluorescence intensity was used to determine the binding constants. The thermodynamic parameters, the enthalpy change (DeltaH) and the entropy change (DeltaS) were calculated to be -12.45 kJ x mol(-1)and 52.48 J x mol(-1) x K(-1) according to the van't Hoff equation, which indicated that hydrophobic and electrostatic interactions played the main role in the binding of daphnetin to HSA, in accordance with the results of calculations performed on a Silicon Graphics Ocatane2 workstation. In addition, the binding distance between daphnetin and HSA was obtained (4.02 nm) based on the Forster energy transfer theory.     

Polymerization of methyl methacrylate by 2‐pyrrolidinone and n‐dodecyl mercaptan

The bulk polymerization of methyl methacrylate initiated with 2‐pyrrolidinone and n‐dodecyl mercaptan (R‐SH) has been explored. This polymerization system showed “living” characteristics; for example, the molecular weight of the resulting polymers increased with reaction time by gel permeation chromatographic analysis. Also, the polymer was characterized by Fourier transform infrared spectroscopy, ¹H NMR, and ¹³C NMR techniques. The polymer end with the iniferter structures was found. By the initial‐rate method, the polymerization rate depended on [2‐pyrrolidinone]^1.0 and [R‐SH]⁰. Combining the structure analysis and the polymerization‐rate expression, a possible mechanism was proposed. n‐Dodecyl mercaptan served dual roles—as a catalyst at low conversion and as a chain‐transfer agent at high conversion. Finally, the thermal properties were studied, and the glass‐transition temperature and thermal‐degradation temperature were, respectively, 25 and 80–100 °C higher than that of the azobisisobutyronitrile system. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3692–3702, 2002     

Preparation and characterization of new thermally stable and optically active poly(ester‐imide)s by direct polycondensation with thionyl chloride in pyridine

4,4′‐hexafluoroisopropylidene‐2,2‐bis‐(phthalic acid anhydride) (1) was reacted with L ‐methionine (2) in acetic acid and the resulting N,N′–(4,4′‐hexafluoroisopropylidenediphthaloyl)‐bis‐L ‐methionine (4) was obtained in high yield. The direct polycondensation reaction of this diacid with several aromatic diols such as bisphenol A (5a), phenolphthalein (5b), 1,4‐dihydroxybenzene (5c), 4,4′‐dihydroxydiphenyl sulfide (5d), 4,6‐dihydroxypyrimidine (5e), 4,4′‐dihydroxydiphenyl sulfone (5f) and 2,4′‐dihydroxyacetophenone (5g) was carried out in a system of thionyl chloride and pyridine. Expecting that the reaction with thionyl chloride in pyridine might involve alternative intermediates different from an acyl chloride, the polycondensation at a higher temperature favorable for the reaction of the expected intermediate with nucleophiles was attempted, and a highly thermally stable poly(ester‐imide) was obtained by carrying out the reaction at 80°C. All of the above polymers were fully characterized by ¹H‐NMR, ¹⁹F‐NMR FT‐IR spectroscopy, elemental analysis and specific rotation. Some structural characterization and physical properties of these optically active poly(ester‐ imide)s are reported. Copyright © 2006 John Wiley & Sons, Ltd.     

Fourier transform infrared spectroscopy study of the effect of pH on anion and cation adsorption onto poly(acrylo‐amidino diethylenediamine)

The role of hydrogen bonding in the chemistry of transition‐metal complexes remains a topic of intense scientific and technological interest. Poly(acrylo‐amidino diethylenediamine) was synthesized to study the effects of hydrogen bonding on complexes at different pHs. The polymer was synthesized through the coupling of diethylene triamine with polyacrylonitrile fiber in the presence of AlCl₃ · 6H₂O addition. The adsorption capacity of this polymer was 11.4 mequiv/g. The ions used for the adsorption test were CrO, PO, Cu²⁺, Ni²⁺, Fe²⁺, and Ag⁺. All experiments were confirmed with Fourier transform infrared. In the study of anion adsorption, at low pHs, only ionic bonds existed, whereas at high pHs, no bonds existed. However, in the middle pH region, both ionic bonds and hydrogen bonds formed between poly(acrylo‐amidino diethylenediamine) and the chromate ion or phosphate ion. When poly(acrylo‐amidino diethylenediamine) and metal ions (Cu²⁺, Ni²⁺, Fe²⁺, and Ag⁺) formed complexes, a hydrogen‐bonding effect was not observed with Fourier transform infrared. The quantity of metal ions adsorbed onto poly(acrylo‐amidino diethylenediamine) followed the order Ag⁺ > Cu²⁺ > Fe²⁺ > Ni²⁺. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2010–2018, 2004     

<Emphasis Type="Italic">o</Emphasis>-Phenylenediamine as a New Catalyst in the Highly Regioselective Conversion of Epoxides to Halohydrins with Elemental Halogens

Summary. The regioselective ring opening of epoxides using elemental iodine and bromine in the presence of o-phenylenediamine as a new catalyst affords vicinal iodo alcohols and bromo alcohols in high yields. The major advantages of this method are versatility, high regioselectivity, a cheap and commercially available catalyst, mild and neutral reaction conditions, and short reaction times. Fourier transform Raman spectroscopy was used to study the reaction of iodine with o-phenylenediamine. The results indicate that the complex [(Diamine)I]⁺·I₅^– is formed, and we suggest that the major nucleophile is the pentaiodide ion. This bulky nucleophile has a fundamental role in the high regioselectivity observed attacking the less sterically hindered epoxide carbon.