Observation of magnetic cluster phase above Curie temperature in Fe2CrAl Heusler alloy

We present a detailed magnetic critical behavior study of Fe₂CrAl Heusler alloy, for the first time, with rigorous analysis of high precision magnetization data obtained over the critical temperature region. Our studies confirm that B2 type site-disordered in Fe₂CrAl alloy exhibits long-range ferromagnetic order below a well defined Curie temperature (T=208 K). Though the nature of this transition is found to be of second order, the estimated critical exponents β=0.42, γ=1.356 and δ=4.25, are in between the theoretically predicted values for three-dimensional Heisenberg and mean-field interaction models. However, it is noteworthy that the scaling relations are obeyed indicating renormalization of interactions around the Curie temperature (T_C), where magnetization data collapse into two separate branches, above and below T_C. This conclusively shows that calculated critical exponents as well as critical temperature are unambiguous and intrinsic to the system. However, magnetization vs temperature data shows another magnetic transition (at T=313 K) above the Curie temperature. It is shown that the short range magnetic correlation exist even beyond T_C with cluster moment ∼10² μ_B. This is attributed to a site disorder which results in formation of Cr clusters with short range ferromagnetic order.     

AlGaN插入层对InAlN/AlGaN/GaN异质结散射机制的影响

InAlN/AlN/GaN异质结中,名义上的AlN插入层实为Ga含量很高的AlGaN层, Al, Ga摩尔百分比决定了电子波函数与隧穿几率,因此影响与InAlN/AlGaN势垒层有关的散射机制.本文通过求解薛定谔-泊松方程与输运方程,研究了AlGaN层Al摩尔百分含量对InAlN组分不均匀导致的子带能级波动散射、导带波动散射以及合金无序散射三种散射机制的影响.结果显示:当Al含量由0增大到1,子带能级波动散射强度与合金无序散射强度先增大后减小,导带波动散射强度单调减小;在Al含量为0.1附近的小组分范围内,合金无序散射是限制迁移率的主要散射机制,该组分范围之外,子带能级波动散射是限制迁移率的主要散射机制;当Al摩尔百分含量超过0.52,三种散射机制共同限制的迁移率超过无插入层结构的迁移率, AlGaN层显示出对迁移率的提升作用.     

铝合金材料在14 MeV中子

铝合金是激光惯性约束聚变(ICF)装置中最常用的结构材料之一,将直接受到高能量、高产额的中子辐照。评估铝合金材料在14 MeV中子辐照下的活化特性,可为我国ICF装置的材料选取提供参考。采用FISPACT活化计算软件,计算并比较了三种不同牌号的铝合金材料在14 MeV中子辐照后产生的比活度和剂量率,并分析了不同元素对比活度和剂量率的贡献。结果表明,铝合金的比活度和剂量率在冷却一周之内下降了3个数量级。铝合金的活化主要来自Al元素、Mn元素和Zn元素,主要活化产物为²⁴Na, ⁵⁴Mn和⁶⁵Zn。Al元素在冷却一周内对比活度(剂量率)的贡献大于90%,其余两种元素在两周之后占主导作用,其贡献之和超过50%。通过选取低Mn, Zn质量分数的铝合金,可降低材料在活化后的放射性水平。     

金属掺杂钨基合金阴极的二次电子发射系数研究

实验中制备了W-Re,W-Sc,W-Zr,W-Y合金阴极,其中Re,Sc,Zr,Y元素所占合金阴极材料的质量分数都为5%。二次电子发射系数测试结果显示,Re掺杂合金阴极对提高纯钨阴极二次电子发射能力显著,掺杂5% Re的W-Re合金阴极材料具有最大二次电子发射系数,其值为1.8,相比于纯钨阴极,能够提高80%。鉴于Re对提高纯钨阴极二次电子发射能力显著,对Re掺杂质量分数分别为20%,10%,6%,5%,4%,3%W-Re合金阴极材料二次电子发射系数进行了研究,发现随着Re在W-Re合金阴极材料中含量的降低,其二次电子发射系数在不断增大,仅当Re含量下降至5%左右时,合金阴极具有最大二次电子发射系数,继续下降至4%,合金阴极二次电子发射系数不但没有升高,相反下降至1.41,当下降至3%时,合金阴极二次电子发射系数值迅速降低为1.1。     

Au80Sn20合金焊料制备工艺

针对高功率二极管激光器的封装要求,通过磁控溅射的方法制备了Au80Sn20合金焊料,使用扫描电子显微镜（SEM）观察其微结构和表面形貌;利用能谱仪（EDX）和X射线荧光测试仪分析其成分;采用差热分析法（DTA）测试其熔化温度,并用制备的Au80Sn20合金焊料进行了可焊性实验。结果表明:磁控溅射法可以制备Au80Sn20合金焊料,其制备的Au80Sn20合金焊料表面无明显缺陷,结构致密;成分与理论值接近;熔点与理论熔点接近;焊接浸润性好,空洞率小,强度大。     

Heusler合金Mn2NiGa的第一性原理研究

运用基于密度泛函理论的投影缀加波方法研究了Heusler合金Mn₂NiGa的四方变形,对立方和四方结构的磁矩、电子结构、弹性常数及声子谱进行了计算和分析.Mn原子是Mn₂NiGa总磁矩的主要贡献者,但Mn（A）、Mn（B）原子磁矩的值不等且呈反平行耦合,因而Mn₂NiGa合金在两种状态下均表现为亚铁磁结构.四方变形中,Mn₂NiGa在c/a=0.94和c/a=1.27处出现总能的局域极小值和局域最小值,分别对应一个稳定的马氏体.弹性常数的计算结果显示,Mn₂NiGa的立方结构不满足立方相稳定性判据,四方结构（c/a=0.94和c/a=1.27）的弹性常数满足相应的稳定性判据.立方结构声子谱中存在虚频,而四方结构（c/a=0.94和c/a=1.27）则不存在虚频,验证了Mn₂NiGa四方结构比立方结构稳定.c/a=1.27的四方结构Mn₂NiGa转变为c/a=1.0的立方结构的相变温度在315 K左右.     

钛合金插铣过程温度场的数学建模与有限元分析

从金属切削理论出发分析了钛合金插铣过程的切削热产生机理,推导出工件的热传导方程式,并在此基础上建立钛合金插铣的数学模型,应用Galerkin有限元方法对工件的热传导方程进行推导计算,随后利用Matlab进行数值模拟,最终得到工件稳定后温度分布图.通过数值计算结果与实验结果对比,验证了有限元模型具有可靠和高精度优点.对钛合金插铣过程加工参数的优化和刀具的设计提供了重要参考依据.     

C掺杂FePt铁磁薄膜光诱导超快退磁动力学研究

FePt合金薄膜由于具有较强的磁各向异性而在磁信息和磁光信息存储中具有重要的应用.C掺杂可精确调控薄膜的磁各向异性,从而可有效地改变薄膜的矫顽场.通过超短激光脉冲与铁磁薄膜相互作用,可以获得非平衡状态下电子、自旋和晶格等自由度之间的动态耦合参数,这是研究超快磁记录材料的物理基础.本文基于瞬态磁光Kerr效应,研究了两种C掺杂浓度下FePt薄膜的超快磁光响应.实验结果表明:瞬态Kerr信号与外加磁场正相关,磁场反向,Kerr信号反号,而瞬态反射率与外加磁场无关;不同C掺杂的FePt薄膜的矫顽场不同,软磁的退磁时间显著小于硬磁薄膜的退磁时间.我们还观测到超快激光在铁磁薄膜中诱导频率约为49 GHz的相干声学声子,该声子的频率与外加磁场无关.实验结果为设计和研制新型磁光薄膜提供了实验依据.     

Tensile properties and microstructure of 2024 aluminum alloy subjected to the high magnetic field and external stress

In order to explore the dependence of plasticity of metallic material on a high magnetic held,the effects of the different magnetic induction intensities(H = 0 T,0.5 T,1 T,3 T,and 5 T) and pulses number(N = 0,10,20,30,40,and 50) on tensile strength(σ_b) and elongation(δ) of 2024 aluminum alloy are investigated in the synchronous presences of a high magnetic held and external stress.The results show that the magnetic held exerts apparent and positive effects on the tensile properties of the alloy.Especially under the optimized condition of H~*=1 T and N~*=30,the σ_b and 8 are 410 MPa and 17% that are enhanced by 9.3% and 30.8% respectively in comparison to those of the untreated sample.The synchronous increases of tensile properties are attributed to the magneto-plasticity effect on a quantum scale.That is,the magnetic held will accelerate the state conversion of radical pair generated between the dislocation and obstacles from singlet to the triplet state.The bonding energy between them is meanwhile lowered and the moving flexibility of dislocations will be enhanced.At H~* = 1 T and N~* = 30,the dislocation density is enhanced by 1.28 times.The relevant minimum grain size is 266.1 nm,which is reduced by 35.2%.The grain rehning is attributed to the dislocation accumulation and subsequent dynamic recrystallization.The(211) and(220) peak intensities are weakened.It is deduced that together with the recrystallization,the hne grains will transfer towards the slip plane and contribute to the slipping deformation.     

PLD方法制备的纳米Fe/Al薄膜的结构及应力分析

 采用PLD方法制备了Fe/Al合金薄膜，研究了Fe/Al合金薄膜的物相、结构、应力等。研究表明薄膜的沉积速率随着衬底温度的升高而降低。原子力显微镜（AFM）图像显示，薄膜表面平整、致密且光滑，均方根粗糙度小于1 nm。等离子体发射谱（ICP）表明Fe/Al原子比为1∶1。X射线小角衍射（XRD）分析表明薄膜中的物相是Al_0.5Fe_0.5，Al_0.5Fe_0.5晶体具有简单立方结构(SC)，晶格常数为0.297 nm，平均晶粒尺寸为81.74 nm，平均微畸变为0.007 6。