Spin-glass behaviour of novel ternary uranium aluminide U3Co4+ x Al12− x (x = 0.55)

Experimental results on dc and ac susceptibility, magnetization and magnetic relaxation, specific heat, electrical resistivity and magnetoresistivity up to 8?T are reported for the novel ternary uranium aluminide U₃Co_4.55Al_11.45. The temperature dependence of the dc susceptibility shows a cusp at a characteristic temperature T _f?=?8–10?K that depends weakly on the applied magnetic field. The observed pronounced difference between the ZFC and FC magnetizations, as well as the decay in the remanent, both give evidence that a highly irreversible, frozen state is formed below T _f which is reminiscent of spin-glass behaviour. The real and imaginary parts of the ac susceptibility show that the corresponding T _f peaks are only slightly dependent on frequency. Electrical resistivity measured at zero and in fields up to 8?T indicates that the Kondo-like state becomes dominant at temperatures above T _f.     

Effect of Fe on the glass-forming ability,structure and devitrification behavior of Zr–Cu–Al bulk glass-forming alloys

We report on the glass-forming ability and devitrification behavior of Zr₆₀Cu₃₀Al₁₀, Zr₆₀Cu₂₅Al₁₀Fe₅ and Zr_62.5Cu_22.5Al₁₀Fe₅ bulk glass-forming alloys on heating. The effect of Fe addition on the structure of Zr–Al–Cu alloys is also discussed. Crystallization kinetics and structural changes in the glassy alloys were studied using X-ray diffraction, transmission electron microscopy, differential scanning and isothermal calorimetry methods. The results indicate that good glass-formers, such as Zr_62.5Cu_22.5Al₁₀Fe₅, are located somewhat beyond the equilibrium eutectic point. Possible phase separation in the supercooled liquid on heating and electron beam-induced in situ crystallization are observed and discussed.     

��-Һ�Ӵ�����ȡҺ̬�Ǧ�Ͻ��е���

在自行设计与建造的液态锂铅合金鼓泡器实验系统上,开展了气-液接触法提取液态锂铅合金中的氢。实验结果表明,氦气比氩气更适合作填料塔的载带气;塔温越高,塔出口端氢含量越大;载气流速对出口端氢含量的影响呈锯齿状,无明显规律。实验结果虽然与文献数据有差别,但可以认为采用气-液接触法提取液态锂铅中的氢同位素是可行的,提取效率是随液态锂铅在填料塔中滞留的时间增长而增大的。     

Eu,Dy共掺杂SrAl2O4长余辉材料制备新工艺

活化Al-Sr合金粉末水解制备SrAl₂O₄长余辉材料的前驱体,并采用高温固相反应法制备出Eu,Dy共掺杂的SrAl₂O₄长余辉材料,对其微观结构和发光特性进行了研究。实验结果表明:前驱体中Al、Sr元素在微观状态下分布均匀,所制成的长余辉发光材料的发射主峰位于520nm附近,为典型的Eu²⁺离子4f5d-4f的特征发射,初始亮度达到18cd/m²,余辉时间长达46h。     

3004铝合金“反常”锯齿屈服现象的研究

在应变速率为5.56×10^-5s^-1—5.56×10^-3s^-1的范围内，在不同温度下(从223K至773K)，对3004铝合金进行系列拉伸试验，探索其锯齿屈服规律；通过激活能的计算、内耗研究、微观组织观察和能谱分析，探讨锯齿屈服的机理与物理本质.结果表明，3004铝合金在形变过程中会出现动态应变时效现象；发现了一种“反常”的锯齿屈服现象：在出现锯齿屈服的温区内，存在锯齿屈服临界应变量转变温度T_t， 关键词： 动态应变时效 锯齿屈服 铝合金 内耗     

Phase transition and pitting corrosion behaviour for Mo—implanted aluminium

Molybdenum ions are implanted into aluminium with high ion flux and high dose at elevated temperatures of 200℃, 400℃ and 500℃. Due to the high temperature and high flux of vacancies and interstitial atoms, the atom diffusion and chemical effects are enhanced during the ion implantation. The effects increase with increasing ion flux and dose, so that new phase formation and phase transition emerge noticeably. X-ray diffraction analysis shows that when the aluminium is implanted with Mo ions at a low ion flux (25μA/cm²), the Al₅Mo alloy is formed. The atomic ratio of Mo/Al of the Al₅Mo phase is close to 20%. When the aluminium is implanted with Mo ions at a high ion flux (50μA/cm²), the phase transition from Al₅Mo to Al₁₂Mo appears, and the latter is dominant, which is determined to be the final phase. The ratio of Mo/Al in Al₁₂Mo is 7.7%. Rutherford backscattering spectroscopy indicates also that the Mo/Al atom ratio is ～7% to ～8% in Mo-implanted aluminium. The atomic ratios of the constituents in Al₅Mo and Al₁₂Mo are of stoichiometric composition for these alloys. The thicknesses of the Al₁₂Mo alloy layers for Mo-implanted Al with ion doses of 3×10¹⁷/cm² and 1×10¹⁸/cm² are 550nm and 2000nm, respectively. The pitting corrosion potential V_p increases obviously. It is clear that due to the formation of Al₁₂Mo alloy layer, the pitting corrosion resistance is enhanced.     

STM/AFM studies of the evolution of morphology of electroplated Ni/W alloys

The surface morphology evolution of Ni/W alloys was studied, as a function of the alloy composition. Using the modified plating baths developed in our laboratory recently, electroplated Ni/W alloys with different W content, in the range of 7–67 atom percent (a/o), can be obtained. This was found to lead to different structures, ranging from polycrystalline fcc-Ni type structure to amorphous, followed by orthorhombic with increasing W content in the alloy. Powder XRD was studied to determine the crystal structures. Ex situ STM, AFM and SEM were used to study in detail the surface morphologies of the different alloys, and their evolution with increasing W content.

The important findings are that a mixture of two crystalline forms can give rise to an amorphous structure. Hillocks that are usually a characteristic of epitaxial growth can also exist in the amorphous alloys. Oriented scratches caused by stress can also be formed.

Up to 20 a/o of W is deposited in the alloys in crystalline form, with the fcc-Ni type structure. Between 20 and about 40 a/o an amorphous structure is observed, and above that an orthorhombic crystal structure is seen, which is characteristic of the NiW binary alloy. Careful choice of the composition of the plating bath allowed us to deposit an alloy containing 67 a/o W, which corresponds to the composition NiW₂.     

光电直读光谱法测定稀土铝合金中La,Ce,Pr,Nd,Sm ,Si,Fe,Cu

本文报道了稀土铝合金中La,Ce,Pr,Nd,Sm,Si,Fe,Cu的光电直读光谱测定，对光源的激发方式及最佳工作条件进行了选择，应用KH－5高能预火花光源，采用单向全功率放电，先冲洗3秒，然后预燃5秒，曝光10秒。各元素谱线间无干扰，。使用固体试样，样品处理简单。经试验验证该法简便快速，精密度准确度高，含量在0．001％－0．002％之间RSD＜6％，0．02％－0．3％之间RSD＜3％，标准样品的测定值与准确值吻合较好，结果令人满意。