多媒体在二维动量实验中的应用

利用VisualBasic的多媒体功能和CCD摄像头以及气垫桌等组成的实验系统，演示了二维碰撞中的动量守恒．     

KrF激光诱导BrC2F4Br+C2H4反应

激光诱导化学合成是一有兴趣的课题。不久前已报导了红外激光诱导调聚反应的结果。由于红外激光的加热特性,在许多情况下导致选择性与量子产率的矛盾。因紫外光反应的低温特性,有可能获得较高的选择性。但普通光源是宽带光源,对一个以平方断链为主的链反应,过强的吸收不利于链长的提高,而弱吸收又使反应速度太慢。为此,激光光源是满足最佳吸收的合宜光源。在使用了昂贵的激光光源后,经济上的合理性主要取决于链长     

X射线衍射研究N2+注入Si

本文首先给出了180keV的N₂⁺注入Si的X射线衍射(XRD)分布,然后用Levenberg-Marquardt最优化方法模拟实验曲线。根据XRD运动学理论,在我们给出的试探胁变函数和多层模型的基础上,用自编程序计算给出了晶格胁变随注入深度、剂量和退火温度的变化。最后我们对实验和计算结果进行了初步的分析讨论。 关键词：     

Orlicz-Sobolev空间的中点局部一致凸性

本文研究了Orlicz-Sobolev空间的中点局部一致凸性，通过结合Orlicz空间和Sobolev空间的技巧得到分别赋Luxemburg范数和赋Orlicz范数的Orlicz-Sobolev空间具有中点局部一致凸性的充要条件．     

加权二次有理Bézier插值曲线

在本文中,给定一组有序空间数据点列及每个数据点的切矢向量,利用加权二次有理Bézier曲线对数据点作插值曲线,使该曲线具有C1连续性,并且权因子只是对相应顶点曲线附近产生影响,同调整两个相邻的权因子可以调整这两个相邻顶点之间的曲线和它的控制多边形.     

马歇尔-勒纳条件的实证研究

本文从人民币实际汇率变动是否会对我国贸易收支产生影响出发，基于马歇尔．勒纳条件，对计算贸易弹性常用的OLS回归模型进行了改进，建立了向量自回归误差修正模型来估算我国的国际贸易弹性。实证研究表明：我国进出口需求的价格弹性之和大于1。因此人民币贬值可改善贸易收支；反之升值将使贸易收支恶化。     

Luminescent Properties and Mechanism of Gd1-x-yAlO3Eux,REy

GAP:Eu,Re(Gd1-x-yAlO3Eux,REy?A，RE=Pr or Ce) powders were prepared by a nitrate-citrate process. It is found that luminescent intensity decreases when GAP:Eu is co-doped with Pr or Ce. The phenomena of spectra prove that there is a resonant energy transfer between Eu and Pr, by the absorption and emission of lower-energy phonon, and also Ce sensitizer decreases the activator energy level from host→Eu. The two factors are considered to be the main reasons for decrease of the luminescent intensity for the co-doped GAP:Eu,Re.     

红外／雷达双传感器融合目标跟踪算法

实现雷达和红外融合跟踪的基本思路是：首先提取红外成像的目标质心并将其转换到惯性坐标系：然后用最小二乘规则对红外传感器的冗余角度数据进行压缩，以产生在时间上和雷达测量对准的伪角度测量：再通过加权平均的方法分别与雷达的方位角和俯仰角测量进行融合处理，以得到同步数据融合估计。采用了由拉格朗日算法所求得的约束极值作为权系数，使用扩展的卡尔曼滤波方法设计跟踪滤波器，将基于雷达和红外融合得到的数据用于更新滤波器的目标状态。     

Development of Vacuum Monitoring System in the HL-2A tokamak

HL-2A is the first divertor tokamak in China. The vacuum system is one of the important parts of the HL-2A tokamak, which has to be work well during the physics campaign in 2004. As the tokamak machine is separated from the operation staff during discharges, to guarantee the safe and reliable operation of the vacuum system, it is necessary to watch the vacuum system outside the machine hall with an automatic monitoring system. The paper describes the design and manufacture of the monitoring system.     

The Design for Automation of Pellet-Forming Process in HL-2A Pellet Fueling System

In the ever fusion experiments in SWIP, pellet forming process was carried out through adjusting relative devices by staff member in site, which will make every pellet-forming process slight distinction and will result in pellet difference in shape, size and intensity. In the intervals of HL-2A discharges, staff member have to go site to accomplish the pellet-forming process, this wastes human power and increase the potential danger. So it is necessary to develop a remote control system to perform the pellet-forming process. The control system needs have the features of real-time, reliability and be easy to operate and maintain.