脑胶质瘤磁共振弥散张量成像定量参数与VEGF、MMP-9表达的相关性

本研究旨在分析脑胶质瘤患者的磁共振弥散张量成像(DTI)参数与病变组织血管内皮生长因子(VEGF)和基质金属蛋白酶-9(MMP-9)表达的相关性,以及DTI参数对脑胶质瘤进行分级诊断的价值.根据病理分级将102例脑胶质瘤患者分为低级别组(47例)和高级别组(55例),均行MRI和DTI检查,定量测定表观弥散系数(ADC...     

数码成像比色法测定水样中的总磷

在酸性介质中,磷酸二氢钾与钼酸铵、酒石酸锑钾及抗坏血酸作用,生成蓝色的络合物。随着磷酸二氢钾浓度的增加,溶液颜色加深,其数码成像的RGB值亦随着磷酸二氢钾浓度的增加而增加,由此建立数码成像比色法(DIC)测定水样中总磷的新方法。考察了DIC法的影响因素和最佳反应条件。与钼酸铵分光光度法对照,该方法简单,快速。用于实际水样的测定,相对标准偏差为1.8%~3.4%,回收率为99.7%~102.5%,结果与分光度法一致。     

CT and MRI Medical Image Fusion Using Noise-Removal and Contrast Enhancement Scheme with Convolutional Neural Network

Medical image fusion (MIF) has received painstaking attention due to its diverse medical applications in response to accurately diagnosing clinical images. Numerous MIF methods have been proposed to date, but the fused image suffers from poor contrast, non-uniform illumination, noise presence, and improper fusion strategies, resulting in an inadequate sparse representation of significant features. This paper proposes the morphological preprocessing method to address the non-uniform illumination and noise by the bottom-hat–top-hat strategy. Then, grey-principal component analysis (grey-PCA) is used to transform RGB images into gray images that can preserve detailed features. After that, the local shift-invariant shearlet transform (LSIST) method decomposes the images into the low-pass (LP) and high-pass (HP) sub-bands, efficiently restoring all significant characteristics in various scales and directions. The HP sub-bands are fed to two branches of the Siamese convolutional neural network (CNN) by process of feature detection, initial segmentation, and consistency verification to effectively capture smooth edges, and textures. While the LP sub-bands are fused by employing local energy fusion using the averaging and selection mode to restore the energy information. The proposed method is validated by subjective and objective quality assessments. The subjective evaluation is conducted by a user case study in which twelve field specialists verified the superiority of the proposed method based on precise details, image contrast, noise in the fused image, and no loss of information. The supremacy of the proposed method is further justified by obtaining 0.6836 to 0.8794, 0.5234 to 0.6710, and 3.8501 to 8.7937 gain for QFAB, CRR, and AG and noise reduction from 0.3397 to 0.1209 over other methods for objective parameters.     

Automated Synthesis of 68Ga-Labeled DOTA-MGS8 and Preclinical Characterization of Cholecystokinin-2 Receptor Targeting

The new minigastrin analog DOTA-MGS8 targeting the cholecystokinin-2 receptor (CCK2R) used in this study displays the combination of two site-specific modifications within the C-terminal receptor binding sequence together with an additional N-terminal amino acid substitution preventing fast metabolic degradation. Within this study, the preparation of ⁶⁸Ga-labeled DOTA-MGS8 was validated using an automated synthesis module, describing the specifications and analytical methods for quality control for possible clinical use. In addition, preclinical studies were carried out to characterize the targeting potential. [⁶⁸Ga]Ga-DOTA-MGS8 showed a high receptor-specific cell internalization into AR42J rat pancreatic cells (~40%) with physiological expression of rat CCK2R as well as A431-CCK2R cells transfected to stably express human CCK2R (~47%). A favorable biodistribution profile was observed in BALB/c nude mice xenografted with A431-CCK2R cells and mock-transfected A431 cells as control. The high tumor uptake of ~27% IA/g together with low background activity and limited uptake in non-target tissue confirms the potential for high-sensitivity positron emission tomography of stabilized MG analogs in patients with MTC and other CCK2R-related malignancies.     

Surface profile measurement of low-frequency vibrating objects using temporal analysis of fringe pattern

A simple and accurate algorithm (phase scanning method) is proposed for 3D surface contouring and dynamic response determination of a vibrating object. A sinusoidal fringe pattern is projected onto a low-frequency vibrating object by a programmable liquid crystal display projector. The fringe patterns are captured by a high-speed CCD camera with a telecentric gauging lens. Phase values are evaluated point by point using phase scanning method. From the phase values of each point on the object, the contour of the specimen at different instants of vibration can be retrieved. In this paper, a small vibrating coin is used to demonstrate the validity of the method and the experimental results are compared with test results on a stationary coin using four-step phase shifting and fast Fourier transform methods. The technique is especially useful in applications where the vibrating object has a complicated shape.     

用于双光子激发荧光寿命显微成像的高重复频率皮秒扫描相机

建立了一台基于新研制的高重复频率皮秒扫描相机的双光子激发荧光寿命显微成像系统,重点介绍所研制的高重复频率皮秒扫描相机。为了在高时间分辨力的同时扩大时间测量范围,实现大面积两维空间高时间分辨取样测量,从而提高采样速率和更有效地发挥扫描相机的作用,设计和研制了一种大面积、高时间分辨力扫描变像管和一种重复频率高达1MHz的斜坡电压扫描电路。基于上述关键部件所研制的扫描相机具有重复频率高、扫描速度可调、时间分辨力高、工作面积大、非线性低、触发晃动小等优点。用钛宝石飞秒激光器作为激光脉冲源,通过脉冲提取器将76MHz的高重复频率降低为1MHz,采用可调延时器和标准具对扫描相机的时间分辨力、扫描速度和非线性进行标定。该系统的时间分辨力达到6.5ps,非线性为2.60%,可测量的时间范围从十几皮秒到几十纳秒。测量了若丹明6G和香豆素314两种标准荧光染料的荧光寿命,取得了与参考文献一致的实验结果。     

太赫兹成像技术对玉米种子的鉴定和识别

利用太赫兹时域光谱(THz_TDS)测试技术及透射式太赫兹逐点扫描成像技术分别对几种玉米种子DNA和胚的样品进行了光谱和成像测量;利用空间图样成份分析(component spatial pattern analysis)方法对得到的THz像进行识别运算。实验结果表明,几种样品在THz波段都有不同的吸收特性,但都没有明显的吸收峰,不能利用“特征指纹谱”进行识别。用基于THz扫描成像的空间图样成份分析方法能很好地实现不同玉米种子DNA样品的鉴定和识别。与现有的THz图像识别方法相比,这个方法只需要THz像的实验数据和样品的吸收谱信息,不需要样品的其它特征。这项研究为进一步利用THz成像技术实现无损检测、安全检查、质量监测等提供了依据,具有实际应用价值。     

大口径合成孔径激光成像雷达演示样机及其实验室验证

合成孔径激光成像雷达(SAIL)的主要技术指标如光学足趾尺寸和成像分辨率等都必须在所设计的远距离传输后实现.提出了一种在实验室空间近距离实现SAIL全系统贯通验证的方法,即在SAIL中附加光学装置使得其在近距离产生发射光束的准几何投影和足够大的外差接收视场,从而产生近距离二维SAIL成像必需的并且适当的光学足趾和方位向...     

三维成像中相位级次自编码的相位测量方法

提出一种相位级次自编码技术的相位测量方法.与传统的相位测量技术不同,该方法利用截断相位的微分值作为编码通道,完成对各条纹级次的编码.构造的代码序列总长度为投影条纹的周期数,每个周期作为一个码元,由相邻若干码元构成一个代码子序列.相位计算后,根据截断相位的微分信息,可以提取出各周期及其码元值,通过在设计的代码序列中进行代...     

基于经典光学方法的物体表面微观结构的三维成像

设计了基于经典光学方法的物体表面微观结构的三维成像实验装置以及相应计算程序,从记录不同角度平行光照射下的物体表面照度出发,经图片处理后得到物体表面的三维立体结构.