Efficiency of radiation-induced main-chain scission of poly (methyl methacrylate) depends on the irradiation temperature because of coexisting monomer

Effect of irradiation temperature on the main-chain scission of poly (methyl methacrylate) (PMMA) caused by γ-irradiation was studied by means of gel permeation chromatography and ESR spectroscopy. Although no temperature dependency was observed on the scission efficiency for purified PMMA, the efficiency for crude or monomer-doped purified PMMA was decreased by decreasing the temperature below ca. 200 K. Above 200 K the efficiency was constant and did not depend on the purity of PMMA. ESR study of the irradiated PMMA revealed that the suppression of the scission below 200 K is induced by the addition of methyl methacrylate monomer to primary radical species, which otherwise cause the main-chain scission by warming the polymer above 200 K. The primary radical generated above 200 K immediately converts to the scission-type ? CH₂ ? ?(CH₃) COOCH₃ radical through the β-scission of the polymer main chain, so that the efficiency of the scission does not depend on both the impurity and the irradiation temperature. © 1994 John Wiley & Sons, Inc.     

Phosphaalkynes—Syntheses,Reactions, Coordination Behavior [New Synthetic Methods (73)]

Organophosphorus compounds have been applied in two ways in chemical synthesis. They can either be used as a reagent in a step of the synthesis (for example, in the Wittig reaction) or they can be incorporated directly into the target molecule. This second application, in particular, has expanded greatly in the last few years with the preparation of low-coordination phosphorus compounds. These include the phosphaalkynes, which are of great interest to organic and inorganic chemists. Phosphaalkynes have been employed in the synthesis of heterocyclic compounds, phosphaarenes and their valence isomers, and polycyclic compounds. Further applications have been the use of phosphaalkynes as new ligand systems in complex chemistry and their cyclooligomerization with organometallic reagents. While the chemical properties of phosphaalkynes have little in common with those of nitriles, they are in many ways very similar to those of the isoelectronic acetylenes.     

An intermediate spherical model of a ferromagnet

A one-parameter family of partition functions is considered which for zero value of the parameter reduces to the spherical model of a ferromagnet. The model for > 0 is closer to the usual discrete lattice spin model of a ferromagnet than is the spherical model. The first four terms in of the limiting value of the partition function are calculated above and below the critical temperature for arbitrary interactions using the saddle point method to calculate certain correlation functions for the spherical model. These calculations indicate that the critical temperature is independent of for small and certain interactions.Part of this research appeared in the author's doctoral thesis.⁽³⁾     

Dispersion state of CuO on CeO2

XRD and XPS are used to study the dispersion state of CuO on ceria surface. The dispersion capacity values of CuO measured by the two methods are consistent, which are of 1.20 mmol CuO/100 m² CeO₂. In addition, the results reveal that highly dispersed Cu²⁺ ions are formed at low CuO loadings and that increasing the CuO content to a value higher than its dispersion capacity produces crystalline CuO after the surface vacant sites on CeO₂ are filled. The atomic composition of the outermost layer of the CuO/CeO₂ samples has been probed by using static secondary ion mass spectroscopy (SSIMS), and the ratim of Cu/Ce are found to be 0.93 and 0.46 for the 1.22 and 0.61 mmol CuO/CeO₂ samples respectively. Temperature-programmed reduction (TPR) profile with two reduction peaks at 156 and 165°C suggests that the reduction of highly dispersed Cu²⁺ ions consists of two steps and is easier than that of CuO crystallites, in which the TPR profile has only one reduction peak at about 249°C. The above experimental results are in good agreement with the prediction of the incorporation model. Project supported by the National Natural Science Foundation of China.     

Retention of ionizable compounds on HPLC. Modelling retention for neutral and ionizable compounds by linear solvation energy relationships

Summary A global LSER model that relates HPLC retention to mobile phase composition and pH is tested for a varied group of solutes, both neutral and ionizable, in a polymeric column and methanol-water mobile phases. It is compared to the local LSER model developed only for a given mobile phase, i.e., a fixed organic modifier content, and to the global LSER model set only for neutral solutes. The global LSER model for neutral and ionizable solutes requires a few supplementary parameters over the other models tested, but it accounts for retention under any experimental conditions for a given column and methanol-water mobile phases, describing properly the interactions established in the HPLC system (hydrophobicity, hydrogen-bond acidity and basicity, dipolarity/polarizability…). This paper is number 13 of a series with the same general title: “Retention of Ionizable Compounds on HPLC” published in various journals.     

A generalization of the Rouse-Zimm model

The idea of consistently averaging the hydrodynamic interaction and its various consequences for Hookean dumbbells are reviewed. For long chains this idea can be used to generalize the Rouse-Zimm model for polymer solutions. Unlike the usual Rouse-Zimm model, the new model for steady shear flow predicts a nonzero second normal stress coefficient and shear rate dependent material functions. In the limit of long chains, the viscosity and the normal stress coefficients are universal functions of the reduced shear rate.This paper was presented at the Frühjahrstagung des Fachausschusses Polymerphysik der Deutschen Physikalischen Gesellschaft at Kaiserslautern (West Germany), March 12–14, 1986.     

On the self-association of the normal alcohols and the glass transition in alcohol-alcohol solutions

The glass-transition temperature (T_g) in mutual binary mixtures of the primary alkanols from methanol throughn-octanol has been measured as a function of composition. For mixtures of the alkanols heavier than ethanol,T _g is found to be a linear function of the number-average molecular length. Methanol and ethanol mixtures show higherT _g values than indicated by this relation. These results are found to be consistent with association of the heavier alkanols into chains of very great length in the supercooled liquid, while ethanol and methanol must form networks with a moderate degree of crosslinking between chains.     

Emission characteristics of high-powered microwave induced plasma optical emission spectrometry by using nitrogen–oxygen mixture gas

A high-powered, microwave-induced nitrogen–oxygen plasma (N₂–O₂–MIP) generated by using an Okamoto cavity at atmospheric pressure was investigated when the observation height, the flow rate of carrier gas, and the oxygen content were varied as the experimental parameters. The emission characteristics of the plasma were evaluated with regard to the excitation temperature and the intensity ratio of atomic line to ionic line. The excitation temperature of the N₂–O₂–MIP was in the range of 5100–5700 K when the oxygen content was varied from 0 to 30% at the observation height of 7 mm and the carrier gas flow rate of 0.6 l/min. The intensity ratio of atomic line to ionic line was elevated with an increase in the oxygen content.     

Inverse relaxation-model and relation to recovery internal friction

Inverse relaxation is studied for hard elastic polypropylene (HEPP), rubber and non-elastic polypropylene. The results show that contractive stress, stress, and internal friction are three essential factors related to the phenomenon. A three-element model in which each element has a definite meaning is proposed to describe this phenomenon. The results also show that, in the first cyclic deformation, relaxation time increases with the increase of recovery for all the materials, which indicates that recovery viscosity increases with the increase of recovery, but the stress rising amplitude (SRA) of inverse relaxation has a maximum in the recovery range. Analysis indicates that SRA equals recovery internal friction (RIF) for ideal material in which stress is solely a function of strain, independent of paths, and approximately equals RIF for non-ideal material at a given strain. From this principle it is found that the order of the work counteracted by RIF for the four materials is the same as that of their second hysteresis loop, and the RIF of HEPP has a sudden increase at the later recovery range.     

Studies on the properties of ionic liquid EMIInCl4

This paper reports that an ionic liquid (IL) has been prepared by directly mixing InCl₃ and 1-methyl-3-ethylimidazolium chloride (EMIC) with molar ratio 1/1 under dry argon atmosphere. The densities, and surface tension of the pure IL were determined at temperature range of 293.15 to 343.15 ± 0.1 K. The volumetric properties and the properties of surface for ionic liquid based on group III were discussed by Glasser's theory and Yang's interstice model.