X-ray standing waves and scanning electron microscopy — Energy dispersive X-ray emission spectroscopy study of gold nanoparticles

A systematic characterization of mono-disperse nanoparticles with nominal diameters of 25 nm, 46 nm, 73 nm, 100 nm, 115 nm, and 250 nm was performed using X-ray standing waves (XSW). The samples were prepared on Si-wafer pieces and analyzed at DELTA synchrotron facility at beamline BL8 under grazing incidence geometry of the primary radiation. Additionally, SEM-EDX inspections of single particles as well as population-density checks were conducted. Particles with smaller diameters were able be characterized by XSW while the larger ones were not completely covered by the interference field produced by the provided 15 keV monochromatic radiation of BL8. The results of the measurements were compared with those of numerical simulations. The extension of the interference field perpendicular to the Si-wafer reflector was determined to be 83 nm ± 4 nm.     

Theoretical model for the transverse interference pattern of GRIN optical fiber using a laser sheet of light

A new technique (El-Ghandoor et al., Opt. Laser Technol. 31(7) (1999) 481–488) has been applied to study the shape of transverse interference fringes, instead of multiple beam Fizeau fringes (Marhic, Stein, Appl. Phys. Lett. 35 (1975) 1678–1682), from a GRIN optical fiber. In this technique, a laser light sheet is used to illuminate and pass directly through the optical fiber. Theoretical expressions are derived for the optical path differences of three groups of interference beams. The first one passes through the cladding, the core, and then the cladding once again; the second passes through the cladding only, and the third passes through the surrounding air. Theoretical expressions for the shape of transverse interference fringes formed across isotropic non-absorbing optical fibers are also calculated.     

Inter-cell spectrum efficiency improvement technology

Improvement in inter-cell spectrum efficiency is a valuable research topic in mobile communication system, which affects cell edge user experience especially. According to current research results, there are three methods to deal with inter-cell interference to improve inter-cell spectrum efficiency, including inter-cell interference randomization, inter-cell interference cancellation and inter-cell interference coordination. This paper analyzes three important inter-cell spectrum efficiency improvement technologies, soft frequency reuse (SFR), uplink power control, and downlink coordinated multi-point transmission/reception (CoMP), and relative research progress.     

Direct patterning of polysilanes and polygermanes using interference lithography

The direct patterning of poly(p‐methoxyphenylmethylsilane) (PMPMS) and poly(p‐methoxyphenylmethylgermane) (PMPMG) by interference lithography is reported. Copyright © 2011 John Wiley & Sons, Ltd.     

工程测量中光波干涉必须满足的几个条件

讨论了两列光波发生干涉现象的理想化条件和在实验中能否观察到干涉现象发生的操作性条件，推导了各种情况下的理论公式。从工程应用的角度出发，研究了检测仪器的响应时间T和光强分辨能力对观察光的干涉现象的影响，提出了观察光的干涉现象的第四个必要条件，对在各种情况下应用光的干涉现象有一定的指导作用。     

Multi-mode opto-thermo-mechanical stretching system for determination of 3D refractive index along the axis of stretched and/or heated fibres

A multi-mode opto-thermo-mechanical stretching system was modified to study the changes in the 3D of optical and structural properties of stretched fibre along its axis. The structural deformation of isotactic Polypropylene, (iPP), fibres was studied at different draw ratios. The modified system coupled with Pluta polarising interference microscope was used to determine the variation of the birefringence in three dimensions during stretching process. Using this modified system, the multi-necking was detected. Subfringe analysis technique was used to determine the phase distribution of the obtained microinterferograms, which were given for illustration.     

Beam profile measurement with CR-39 track detector for low-energy ions

A CR-39 track detector was successfully used to measure the outline of thin low-energy ion beams. After the etching, the surface of the detector was examined with an observation system composed of a Normarski microscope, a CCD camera and a digital image processing computer. Beam images obtained with the system were in good agreement on the outline of the beam formed with a beam aperture. Also, the resolving power in the beam outline measurement was roughly explained from the consideration of the ion range and the etch-pit growth in the chemical etching for the CR-39 detector.     

Evaluation of Transparent Optical Network Performance in Presence of Incoherent Homodyne Crosstalk

A simple method to evaluate the performance of transparent optical networks (TON) that takes into account the incoherent homodyne crosstalk, signal distortion, inter-symbol interference (ISI), amplified spontaneous emission (ASE) noise, and arbitrary optical and electrical filters is proposed. This method combines the effect of the incoherent homodyne crosstalk with an exhaustive Gaussian approximation for the influence of ASE noise, signal distortion, and ISI. It is shown that the incoherent homodyne crosstalk penalty depends on the ASE noise accumulated in the TON, ISI, and extinction ratio. The proposed method estimates are compared with experimental results published by other authors. Good agreement is observed for one, two, and four incoherent homodyne crosstalk signals, revealing that the proposed method provides accurate estimates even when the methods based on a Gaussian approximation for the incoherent homodyne crosstalk fail. The proposed method is used to assess the performance of a TON composed by optical add-drop multiplexers based on arrayed waveguide gratings. Results reveal that incoherent homodyne crosstalk, ASE noise, and ISI impair the TON performance and, therefore, none can be neglected in the TON design.