埋入式光纤传感器界面剪切强度实验

采用实验方法对光纤与基体间界面性能进行研究.用临界断裂长度法直接测定界面的剪切强度,由于光纤拉伸强度高于树脂基的拉伸强度,出现试验时基体破坏而光纤完整地从树脂基中拔脱的现象.用单丝拔出法测量光纤与基体之间界面剪切强度,试验结果表明,光纤单丝拔出时,总是出现光纤涂层在锚入端断裂,而纤芯从涂层中拔脱的现象,说明当光纤埋入复合材料中,涂层和基体材料结合为一体,光纤涂层与纤芯之间界面剪切强度最低.承载时,若光纤所受正应力超过σ_(max),会出现光纤涂层与纤芯之间界面脱离,产生裂纹,降低整体结构力学性能.     

光弹法测量超声换能器声场

超声换能器声场的测试对于超声检测具有基础性作用,而传统的超声换能器声场测试方法具有一些局限性。本文介绍了搭建的动态激光光弹实验平台,并利用动态光弹法测量了纵波换能器和横波换能器辐射声场的特征,由瞬态声场图像获得了传声介质的声波速度及超声换能器的中心频率;由稳态声场图像获得了声场的近场长度、指向性和扩散角等参数;分析了光弹实验系统和测量方法可能引起测量误差。本文结果表明动态光弹法是一种有效的定量测量超声换能器声场的方法。     

用锁相环电路跟踪压电换能器并联谐振频率区

本在介绍用PLL（Phase-Locked Loop锁相环）电路进行频率跟踪的原理和实质的基础上,给出一种够跟踪压电换能器并联频率fP区间的具体电路,并通过实验研究了匹配电感和负载等对电路跟踪性能的影响,结果表明,这个电路具有很好的频跟踪和功率自动调节性能。     

从换能器技术的变化看声波测井技术的发展

无论是在电缆测井还是在随钻测井方面,声波换能器结构和振动模式的变化导致了声波测井技术的进步和重大演化.文章以声波测井换能器技术的变化为主线,分析了声波测井技术的发展和进步以及我国在该技术领域取得的进步.单极子声波测井技术已经成为我国成熟的声波测井技术,包括非对称声源技术在内的多极子声波测井技术是我国刚刚攻克的先进声波测井技术并已经进入产业化进程,以井下声波的定向辐射和定向接收为最主要特征的相控声波测井技术是正在研发的新一代声波测井技术,我国在此领域也已经取得显著突破.     

经颅超声刺激人脑海马的数值仿真研究

颞叶癫痫、阿尔兹海默症等神经系统疾病与大脑海马的异常放电相关。近年兴起的经颅超声刺激治疗脑疾病具有无创、能深入脑组织和可调控海马神经元放电的特点。该文基于128阵元相控阵换能器、人头颅CT数据、水体建立超声经颅刺激海马数值仿真模型,数值仿真优选适应于海马刺激的换能器结构参数,并结合电容模型,探究超声声学参数对海马神经元放电的影响。结果表明曲率半径90 mm、开口半径56 mm、阵元半径2.0 mm、频率0.9 MHz的128阵元相控超声换能器可形成适应于刺激人脑海马大小的焦域;且在超声频率为0.9 MHz时对海马神经元放电有较好的抑制作用;在较小的占空比和较低的空间峰值时间平均声强条件下对神经元放电有较好的抑制作用。     

基于二维声子晶体的大尺寸夹心式换能器的优化设计

夹心式换能器应用极为广泛,但当其横向尺寸过大时,存在耦合振动,影响其辐射面的位移分布.本文通过在大尺寸夹心式换能器的前盖板中加工周期排列的槽,来形成一种二维声子晶体结构.随后,采用有限元法对基于二维声子晶体的大尺寸夹心式换能器的振动传输特性、共振频率以及发射电压响应进行仿真模拟,讨论了开槽高度和开槽宽度对其带隙、共振与反共振频率、带宽以及辐射面位移分布的影响.研究结果表明,通过在大尺寸夹心式换能器中应用声子晶体结构可对其进行优化设计.当大尺寸夹心式换能器的工作频率位于其带隙范围内时,二维声子晶体结构能有效地抑制其横向振动,从而改善换能器辐射面位移分布的均匀程度.此外,在大尺寸夹心式换能器的前盖板中加工二维声子晶体结构,能有效提升换能器的带宽,进而拓宽大尺寸夹心式换能器的工作频带.     

被测体材质对电涡流位移传感器特性的影响

本文通过对电涡流传感器的位移特性实验分析不同被测体材料对于传感器输出特性的影响     

基于应力波传播机理的混凝土无损检测研究综述

混凝土结构在基础设施中应用广泛,但环境与荷载导致材料和结构的老化损伤问题,势必影响材料性能及耐久性和结构完整性及安全性.构建有效的混凝土材料性能评估和结构损伤识别体系是当前研究热点.现有研究因对应力波传播机理不深入理解、损伤定位定量模型理想化、损伤形式简化等问题仍存在局限性.因此,开发普适全面、稳定可靠的无损检测系统,对在建或既有混凝土结构服役状况进行长期、实时跟踪,具有重要学术意义和工程应用价值.本文结合混凝土无损检测领域的国内外研究现状及进展,从智能压电材料振动机理研究、混凝土无损检测方法发展、基于应力波的无损检测研究进展这三个逻辑层面,即按照研究手段到研究方法再到具体研究方案的顺序,循序渐进地对混凝土材料性能评估和结构损伤识别的研究进行了成果总结和方法提炼;基于此进一步概述了该领域所存在的瓶颈问题、研究重难点,最后提出了针对这些局限性的混凝土无损检测研究展望.     

Extension of the crosstalk cancellation method in ultrasonic transducer arrays from the harmonic regime to the transient one

This paper describes a procedure to extend the crosstalk correction method presented in a previous paper [A. Bybi, S. Grondel, J. Assaad, A.–C. Hladky-Hennion, M. Rguiti, Reducing crosstalk in array structures by controlling the excitation voltage of individual elements: a feasibility study, Ultrasonics, 53 (6) (2013) 1135–1140] from the harmonic regime to the transient one. For this purpose a part of an ultrasonic transducer array radiating in water is modeled around the frequency 0.5 MHz using the finite element method. The study is carried out at low frequency in order to respect the same operating conditions than the previous paper. This choice facilitated the fabrication of the transducer arrays and the comparison of the numerical results with the experimental ones. The modeled array is composed of seventeen elements with the central element excited, while the others are grounded. The matching layers and the backing are not taken into account which limits the crosstalk only to the piezoelectric elements and fluid. This consideration reduces the structure density mesh and results in faster computation time (about 25 min for each configuration using a computer with a processor Intel Core i5-3210M, frequency 2.5 GHz and having 4 Go memory (RAM)).     

Cu2+‐doped ITO as a Novel Efficient,Transparent, and Fast‐Response Transducer for Ammonia Sensing

As a novel approach, the effect of Cu²⁺‐doped indium tin oxide (ITO) on a flexible polycarbonate substrate is considered as an ammonia sensor. The sensor was fabricated using spin‐coating and subsequent annealing at 160°C for 60 min. The constructed sensor morphology accomplished by surface composition was explored using scanning electron microscopy (SEM) and energy dispersiveX‐ray (EDX) spectroscopy. Using the new strategy, a flexible sensor for ammonia determination with a fast response time of less than 7 s and a recovery time of 8 s was achieved. Sensor characteristics, such as sensitivity, recyclability, response/recovery time, selectivity, stability, flexibility, and transmittance of the layers, were examined. The impedance results showed high sensitivity when the constructed sensor was exposed to NH₃ concentrations in the range 5–1000 ppm. The results showed that doping ITO with Cu²⁺ imparted higher electronic charge density to the sensor surface and enhanced the sensitivity of the sensor by a factor of 352% in comparison with that of pure ITO. The sensitivity, fast response, and recovery time with low‐cost materials and deposition procedure suggest an effective and disposable ammonia sensor at room temperature (23°C).