Biomimetic piezoelectric quartz sensor for caffeine based on a molecularly imprinted polymer

A piezoelectric quartz sensor coated with molecularly imprinted polymer (MIP) for caffeine was developed. The MIP was prepared by co-polymerizing methacrylic acid (MAA) and ethylene glycol dimethacrylate (EDMA) in the presence of azobis(isobutyronitrile) as initiator, caffeine as template molecule, and chloroform as solvent. The MIP suspension in polyvinyl chloride/tetrahydrofuran (6:2:1 w/w/v) solution was spin coated onto the surface of the electrode of a 10 MHz AT-cut quartz crystal. The sensor exhibited a linear relationship between the frequency shift and caffeine concentration in the range of 1×10^–7 mg mL^–1 up to 1x10^–3 mg mL^–1 [correlation coefficient (r)=0.9935] in a stopped flow measurement mode. It has a sensitivity of about 24 Hz/ln(concentration, mg mL^–1). A steady-state response was achieved in less than 10 min. The performance characteristic of the sensor shows a promising and inexpensive alternative method of detecting caffeine. Surface studies were carried out for the reagent phase of the sensor using SEM, AFM, and XPS analysis in order to elucidate the imprinting of the caffeine molecule. The SEM micrograph, AFM image, and XPS spectra confirmed the removal of caffeine by Soxhlet extraction in the imprinting process and the rebinding of caffeine to the MIP sensing layer during measurement.     

蒸馏沉淀聚合过程中交联度对单分散聚合物微球形成的影响书

以苯乙烯为单体、二乙烯基苯（DVB）为交联剂，过氧化二苯甲酰（BPO）为引发剂研究了蒸馏沉淀聚合法制备聚合物微球过程中交联单体二乙烯苯的用量对单分散聚合物微球成球的影响。结果表明，增加二乙烯基苯的比例，即提高交联度有利于形成单分散的聚合物微球。     

Thermosensitive biodegradable polydepsipeptide

A poly(N-isopropylacrylamide) (PNIPAAm)-like biodegradable thermosensitive polydepsipeptide, poly[Glc-Asn(N-isopropyl)], was synthesized by introducing an isopropyl amide group into poly[Glc-Asn]. Poly[Glc-Asn(N-isopropyl)] was degraded in vitro by cleavage of the ester bonds in the main chain in water at room temperature. The non-toxic nature of the polymer and its degradation products, coupled with a cloud point at 29 degrees C in water, make this polymer attractive for biomedical implant applications.     

以铜离子为模板的褐藻酸凝胶对铜离子的选择性富集研究

以铜离子为模板，制备了褐藻酸凝胶（Cu-alginate)，通过吸附实验及过柱渗滤实验，试验了该吸附剂对铜离子的选择性吸附性能，并且采用该吸附剂富集了自来水中微量的Cu^2 ，结合原子吸收法测定了水样中Cu^2 的含量。结果表明：该吸附剂对Cu^2 有较高的选择性吸附性能，显著优于一些化学合成铜离子模板缩聚物及非铜模板褐藻酸凝胶（如Ca-alginate),非重金属离子（如K^ 、Na^ 、Ca^2 ）及某些重金属离子（如Ni^2 、Cd^2 ）等对Cu^2 的吸附均不产生明显干扰。用该吸附剂富集水中的微量铜离子，回收率可达97.7%。     

STUDY ON MAGNETIC FIELD-INDUCED 0RIENTATI0N OF A CHIRAL SIDE-CHAIN LIQUID CRYSTAL POLYACRYLATE USING INFRARED DICHROISM

Magnetic field-induced orientation of a chiral side chain liquid crystalline polyacrylate(P-11) was studied by using IR dichroism. For the investigated P-11, it has been shown thatthe magnetic alignment takes place over the entire temperature range between its meltingpoint and clearing point and the orientation level is strongly temperature-dependent, thedevelopment with time of the magnetic orieatation follows an exponeotial-type relation,and the smectic phase state influences the thermal relaxation process in the absence of themagnetic field.     

Hydrothermal Synthesis and X‐Ray Structural Characterization of Manganese,Nickel, and Cadmium Coordination Polymers Containing 2,3‐Pyridinedicarboxylate as Multidentate Ligands

Three divalent transiton‐metal complexes of 2,3‐pyridinedicarboxylate (2,3‐pda²), [Mn(2,3‐pda)‐(H₂O)3]_∞ ( 7 ), [Ni(2,3‐pda)(H₂O)3]_∞ ( 8 ), and [Cd2(2,3‐pda)₂(H₂O)]_∞ ( 9 ) have been hydrothermally synthesized and structurally characterized. X‐ray diffraction analyses reveal that compounds 7 and 8 are zigzag‐ and linear‐type one‐dimension (1D) coordination polymers, respectively, whereas compound 9 is a three‐dimension (3D) coordination polymer. A simple comparison of the coordination geometries with the available neutral analogues {M_x(2,3‐pda)_x(H₂O)_y}_∞ containing one or two divalent transition‐metal atoms and equal ligands in the presence or absence of coordinated water molecules is also presented.     

Vacuum-ultraviolet induced oxidation of the polymers polyethylene and polypropylene

The emission from low-pressure microwave plasmas in the vacuum-ultraviolet (VUV) region (λ < 200 nm) was investigated in order to use these plasmas as light sources for the study of the VUV photochemistry of polyethylene (PE) and polypropylene (PP) as part of the study of plasma-polymer interaction. These polymers, immersed in low-presure oxygen, were exposed to radiation with wavelengths down to 112 nm, the cut off of magnesium fluoride used as a window to separate the polymer specimen from the plasma light source. Total oxygen incorporation in the surface [O], and the formation of hydroxyl, carbonyl, and carboxyl groups were measured using XPS in combination with chemical derivatizations, particularly their dependence upon the radiation spectrum and the oxygen pressure around the sample. In most experiments the surface oxygen concentration [O] attained a constant value that appears to be related to the initial oxidation rate; this suggests a competition between oxygen incorporation and chain scission reactions, followed by the removal of volatile oxidation products. PE is usually oxidized to a higher level than PP, the latter appearing to be more susceptible to reaction with atomic oxygen than PE. A general initiation mechanism for the VUV experiments is proposed that allows us to explain the observed differences in behavior between PE and PP, and the results obtained under different irradiation conditions. The nature of oxidation products is in both cases very similar to what is observed after direct plasma treatment of the polymers. We conclude that short wavelength radiation contributes very appreciably to the observed surface modification effects during plasma treatment of PE and PP. © 1995 John Wiley & Sons, Inc.     

PU大分子单体水溶液性质

双亲聚合物一般由亲水和亲油 2种链段构成 ,有嵌段型[1,2 ] 和接枝型[3 ] 2种 ,其中通过大分子单体法合成双亲接枝聚合物备受关注[4] 。如以亲水性大分子单体和亲油性小分子单体共聚 ,大分子单体构成共聚物主链上支链 ,具有较大活动性 ,亲水效能高。采用对氯甲基苯乙烯[5] 或甲基丙烯酰氯[6] 与聚氧化乙烯大分子的一端相反应 ,可得到亲水性大分子单体 ,但其分子量及结构变化有限。本文采用常规条件 ,合成了嵌段式水溶性聚氨酯大分子单体 ,其分子量较大 ,共聚接枝的支链较长。利用该大分子单体具有非离子高分子表面活性剂的性质 ,采用无皂乳…     

Nanowire‐Based Electrochemical Biosensors

We review recent advances in biosensors based on one‐dimensional (1‐D) nanostructure field‐effect transistors (FET). Specifically, we address the fabrication, functionalization, assembly/alignment and sensing applications of FET based on carbon nanotubes, silicon nanowires and conducting polymer nanowires. The advantages and disadvantages of various fabrication, functionalization, and assembling procedures of these nanosensors are reviewed and discussed. We evaluate how they have been used for detection of various biological molecules and how such devices have enabled the achievement of high sensitivity and selectivity with low detection limits. Finally, we conclude by highlighting some of the challenges researchers face in the 1‐D nanostructures research arena and also predict the direction toward which future research in this area might be directed.     

Photo-initiated base-formation in a polymer matrix

It was found that amines were formed efficiently by the photolysis of O-acyloximes followed by hydrolysis in polystyrene films and the relationship between structures of O-acyloximes and yields of amines were investigated. O-phenylacetyl acetophenone oxime (PaApO), O-pivaloyl acetophenone oxime (PApO), and O-benzoyl acetophenone oxime (BApO) as monofunctional O-acyloximes and O,O′-succinyl diacetophenone oxime (SDApO) and O,O′-glutaryl diacetophenone oxime (GDApO) as bifunctional O-acyloximes were examined. The yields of amines for PaApO and SDApO under N₂ were ca. 70%, which was the highest among O-acyloximes examined in this experiment. On the other hand, the yields for PApO, BApO, and GDApO were less than 15% and it was verified that the hydrogen abstraction by imino radicals via 6-membered cyclic intermediates resulted in the lowering of yields. Although the effect of oxygen under photolysis on the yields of amine for PaApO was negligible under 50% conversion of PaApO, the yield decreased with further increase in the conversion and was 50% at 90% conversion. © 1994 John Wiley & Sons, Inc.