MgO films grown on yttria-stabilized zirconia by molecular beam epitaxy

MgO films were grown on (0 0 1) yttria-stabilized zirconia (YSZ) substrates by molecular beam epitaxy (MBE). The crystalline structures of these films were investigated using X-ray diffraction and transmission electron microscopy. Growth temperature was varied from 350 to 550 °C, with crystalline quality being improved at higher temperatures. The MgO films had a domain structure: (1 1 1)[1 1 2¯]_MgO(0 0 1)[1 0 0]_YSZ with four twin variants related by a 90° in-plane rotation about the [1 1 1]_MgO axis. The observed epitaxial orientation was compared to previous reports of films grown by pulsed laser deposition and sputtering and explained as resulting in the lowest interface energy.     

Atomistic phenomena in dense fluid shock waves

The shock structure problem is one of the classical problems of fluid mechanics and at least for non-reacting dilute gases it has been considered essentially solved. Here we present a few recent findings, to show that this is not the case. There are still new physical effects to be discovered provided that the numerical technique is general enough to not rule them out a priori. While the results have been obtained for dense fluids, some of the effects might also be observable for shocks in dilute gases.     

卤代对苝醌类光敏剂光敏活性影响的量子化学研究

以一种新型的醌类光敏剂—菌生素 (HMB)为模型化合物 ,利用量子化学从头算HF/ 6 31G和含时密度泛函TD B3LYP/ 6 31G方法计算研究了卤代作用对醌类光敏剂分子性质和光敏活性的影响 .结果发现 ,卤代作用降低了HMB母体的HOMO和LUMO能级 (EHOMO和ELUMO)及其差值△E ,随卤族元素从上到下 ,EHOMO和ELUMO呈增大趋势 ,而△E呈减小趋势 ,使得分子激发光谱有不同程度的红移 ,在增加PQP三重态量子产率的同时降低了分子最低三重激发态的能量 ,两种作用相互抵消 ,使得卤代物的 1O2 量子产率与母体相似 ;增加了分子的绝热电子亲合势 ,使分子产生O2 -的能力下降 ;卤原子的引入 ,降低了HMB母体分子内氢键的强度 ,同时使顺式构型的分子内质子传递势垒增大 ,而使反式构型势垒减小 .     

使用《新概念物理教程:力学》的教学探索

简要介绍《新概念物理教程：力学》的知识体系、特色及改革新意．结合南阳师院2000级、2001级两届本科班对新教材的使用情况，制定适合我院学生实际的力学教学大纲，探索一种以知识为载体、以学生为主体、以培养学生科学素质为宗旨的新型教学模式．对教学中遇到的问题提出具体的解决办法，对使用新教材的效果进行调查分析，为力学教材的使用和力学教学改革提供一些参考。     

Kinetics and equilibrium of small metallic clusters: Ab initio confinement molecular dynamics study of 4

The ab initio molecular dynamics (AIMD) [1] is combined with the heuristic, successive confinement method of surveying a potential energy surface (PES) [2], thereby offering a framework for the simulation study of kinetics and equilibrium properties of metallic clusters. This approach is applied to the study of Au₄, a cluster possessing a simple but specific PES, which consists of very shallow and deep basins and due to this presents a challenge to the conventional AIMD methods. Among other things, the probabilities of the transitions between isomers have been found, and on this basis, both the time-dependent and equilibrium populations of the isomers have been calculated for the conditions typical of the NeNePo experiments [3] in the femtosecond pump-probe spectroscopy.     

The Resonance Phenomena Associated with the Time Asymmetry in Non-Hermitian Quantum Mechanics

Resonances are defined as the poles of the scattering matrix. The poles are associated with the complex eigenvalues of the Hamiltonian which are embedded in the lower half of the complex plane. The asymptotes of the corresponding eigenfunctions are exponentially diverged. Therefore, the resonance eigenfunctions are not embedded in the Hermitian domain of the Hamiltonian. The time asymmetric problem is discussed for these types of non-Hermitian Hamiltonians and several solutions of this problem are proposed.     

Altering the Remote Past

An abstract treatment of Bell inequalities in proposed, in which the parameters characterizing Bell's observable can be times rather than directions. The violation of a Bell inequality might then be taken to mean that a property of a system can be changed by the timing of a distant measurement, which could take place in the future.     

Reduction of dislocation density and improvement of optical quality in ZnO layers by MgO-buffer annealing

Optical properties of ZnO thin films with/without MgO-buffer annealing were investigated by low and room temperature photoluminescence measurements. The ZnO films were grown on c-sapphire substrates by plasma-assisted molecular-beam epitaxy employing a thin MgO-buffer layer. Dislocation density of ZnO layer was reduced from 5.3 × 10⁹ to 1.9 × 10⁹ cm⁻² by annealing MgO-buffer prior to the growth of ZnO. The intensity of free exciton emission from the sample with MgO-buffer annealing was almost twice of that from the sample without annealing, while the deep level emission from the sample with MgO-buffer annealing was about 1/3 of that without annealing. The MgO-buffer annealing improves optical quality of overgrown ZnO films.     

Scattering Problem for a Classical Particle with Spin in a Coulomb Field

We investigate the scattering problem for a relativistic electron with spin in a Coulomb field in the framework of pseudoclassical mechanics. We obtain an analytic expression for the scattering angle and limiting estimates for the scattering parameters for the spinless and nonrelativistic cases. For small angles, the pseudoclassical model under consideration leads to the well-known quantum-mechanical Mott formula.     

Fatigue Loading and Life Prediction in Three Fretting Fatigue Fixtures

Three fixtures for conducting laboratory fretting fatigue tests are described and their respective testing methods and the results of the analysis are compared. Each of these fixtures has been used to investigate the effects of various parameters of interest in fretting fatigue. These fixtures include a unique apparatus in which all load applied to the specimen is transferred to the fretting pads, an apparatus similar to many found in the literature where partial load transfer occurs across the pads, and a simplified dovetail fixture in which the clamping load, P, and the shear load, Q, are varied in phase. Select test conditions from prior experiments performed on identical material and resulting in similar lives ranging from one to ten million cycles from these fixtures are identified. The various testing conditions were used to compute the unique stress field for each case. The resulting contact stresses were used to calculate crack initiation based criteria, and to calculate stress intensity factors. The three fixtures were shown to be able to accommodate a range of loads, fretting pad contours, and specimen geometries that produced a variety of stress fields. A crack-initiation-based criterion was shown to predict the failure lives of thinner specimens accurately. The stress intensity factor calculations showed the possibility of a crack arresting for a stress field that decays rapidly and the possibility of a local minimum for K as a function of depth. The fixtures are shown to be complementary in generating data for development of robust fretting fatigue models that use these criteria.