大型精密离心机光栅测角系统的设计与实现

对JML－1大型精密离心机主轴光栅测角系统的关键技术进行了研究,给出了如何解决光栅测角系统的精度问题。抗干扰问题和动态测角问题的设计方法及测试结果。     

复合材料弹性结构的高精度多尺度算法与数值模拟

１．引言 由于复合材料结构物理参数的非均匀各向异性以及细部几何构形的复杂性,在计算它的位移场、应力、应变场时,传统的有限元法因网格生成困难和计算规模太大而难以实现．７０年代初,Ｉ．Ｂａｂｕｓｋａ,Ｊ．Ｌ．Ｌｉｏｎｓ等人针对复合材料弹性结构提出了均匀化方法,见文［１］,数值实验表明,均匀化方法对描述复合材料弹性结构的有效材料常数及刚度性质是有效的,但它不能刻画应力和应变场的局部变化,因而作为复合材料强度理论的判断依据,均匀化理论显然是不够的．为此,Ｊ．Ｌ．Ｌｉｏｎｓ,Ｏ．Ａ．Ｏｌｅｉｎｉｋ等分别就…     

非线性双曲型守恒律的高精度MmB差分格式

构造了一维非线性双曲型守恒律方程的一个高精度、高分辨率的广义G odunov型差分格式。其构造思想是:首先将计算区间划分为若干个互不相交的小区间,再根据精度要求等分小区间,通过各细小区间上的单元平均状态变量,重构各等分小区间交界面上的状态变量,并加以校正;其次,利用近似R iem ann解算子求解细小区间交界面上的数值通量,并结合高阶R unge-K u tta TVD方法进行时间离散,得到了高精度的全离散方法。证明了该格式的Mm B特性。然后,将格式推广到一、二维双曲型守恒方程组情形。最后给出了一、二维Eu ler方程组的几个典型的数值算例,验证了格式的高效性。     

水中溶解氧的微量滴定

将微量滴定技术应用于常规的碘量法测定水中溶解氧。在实验中采用了WD-CO3型微量滴定装置,并使用自行设计制成的高精度微量移液管（移液的体积可准确至0．001mL）,作为转移标准溶液及试样溶液的工具。对微量滴定及微量移液与常量滴定和常量移液作了对比试验,结果表明两者的分析结果完全吻合,微量滴定（其中包括微量移液）所得结果的精密度也在定量分析允许范围之内。由此,微量滴定技术应用于水中溶解氧的日常分析的可行性得到了验证。     

Effect of the nonlinearity of the CCD in Fourier transform profilometry on spectrum overlapping and measurement accuracy

In Fourier transform profilometry (FTP), we must restrain spectrum overlapping caused by the nonlinearity of the charge coupled device (CCD) and increase the measurement accuracy of the object shape. Firstly, the causes of producing higher-order spectrum components and inducing spectrum overlapping are analysed theoretically, and a simple physical explanation and analytical deduction are given. Secondly, aiming to suppress spectrum overlapping and improve measurement accuracy, the influence of spatial carrier frequency of projection grating on them is analysed. A method of increasing the spatial carrier frequency of projection grating to restrain or reduce the spectrum overlapping significantly is proposed. We then analyze the mechanism of how the spectrum overlapping is reduced. Finally, the simulation results and experimental measurements verify the correction of the proposed theory and method.     

Theoretical description of improving measurement accuracy for incoherence Mie Doppler wind lidar

For the nonlinearity of Fabry-Perot interferometer(FPI) transmission spectrum,the measurement uncertainty of incoherent Mie Doppler wind lidar based on it increases evidently with the increase of backscattering signal Doppler shift.A method of repeating the use of the approximate linear part of FPI transmission spectra for reducing the high uncertainty of a big Doppler shift is proposed.One of the ways of realizing this method is discussed in detail,in which the characteristics of FPI transmission spectrum changing with thickness and incident angle are utilized simultaneously.Under different atmosphere conditions,it has been proved theoretically that the range of measurement uncertainty drops to one-sixth while its minimum has no serious change.This method can be used not only to guide the new system design,but also as a new working way for the fabricated system.     

A surrogate fuel for kerosene

Experimental and numerical studies are carried out to develop a surrogate that can reproduce selected aspects of combustion of kerosene. Jet fuels, in particular Jet-A1, Jet-A, and JP-8 are kerosene type fuels. Surrogate fuels are defined as mixtures of few hydrocarbon compounds with combustion characteristics similar to those of commercial fuels. A mixture of n-decane 80% and 1,2,4-trimethylbenzene 20% by weight, called the Aachen surrogate, is selected for consideration as a possible surrogate of kerosene. Experiments are carried out employing the counterflow configuration. The fuels tested are kerosene and the Aachen surrogate. Critical conditions of extinction, autoignition, and volume fraction of soot measured in laminar non premixed flows burning the Aachen surrogate are found to be similar to those in flames burning kerosene.A chemical-kinetic mechanism is developed to describe the combustion of the Aachen surrogate. This mechanism is assembled using previously developed chemical-kinetic mechanisms for the components: n-decane and 1,2,4-trimethylbenzene. Improvements are made to the previously developed chemical-kinetic mechanism for n-decane. The combined mechanisms are validated using experimental data obtained from shock tubes, rapid compression machines, jet stirred reactor, burner stabilized premixed flames, and a freely propagating premixed flame. Numerical calculations are performed using the chemical-kinetic mechanism for the Aachen surrogate. The calculated values of the critical conditions of autoignition and soot volume fraction agree well with experimental data. The present study shows that the chemical-kinetic mechanism for the Aachen surrogate can be employed to predict non premixed combustion of kerosene.     

Computer Simulation of a 3-D Sensing System with Structured Illumination

A computer simulation system of three-dimensional sensing with structured illumination is presented. It includes the generation of deformed fringe patterns from 3-D shapes and the reconstruction of 3-D shapes, conversely. Some experimental results of the deformed fringe pattern and the reconstructed object shapes are presented. We have also discussed the effect of some major system parameters on the measurement results and considered how to correct these parameters according to the measurement result of the standard plane. Using this simulation system, the major system parameters: environmental conditions, measurement accuracy and algorithm evaluation of the 3-D shape measurement system based on PMP, FTP, SPM, etc., can be researched. © 1997 Elsevier Science Ltd. All rights reserved.     

Ab initio study of [001] GaN nanowires

We present the results of a study of structural, electronic, and optical properties of the unpassivated and H-passivated GaN nanowires having diameters in the range of 3.29 to 18.33 Å grown along [001] direction by employing the first-principles pseudopotential method within density functional theory in the local density approximation. Two types of nanowires having hexagonal and triangular cross-sections have been investigated. The binding energy increases with the diameter of the nanowire because of a decrease in the relative number of the unsaturated surface bonds. The binding energies of the triangular cross-sectional nanowires are somewhat smaller than those of the hexagonal cross-sectional nanowires in accordance with the Wulff’s rule except the smallest diameter triangular cross-sectional nanowire, where the binding energy is comparable with the corresponding hexagonal cross-sectional nanowires. The band gap varies rapidly with the diameter of the nanowire in the case of the smaller diameter nanowires, and quite slowly for the larger diameter nanowires. After atomic relaxation, appreciable distortion occurs in the nanowires, where the chains of Ga- and N-atoms are curved in different directions. These distortions are reduced with the diameters of the nanowires. The optical absorption in the GaN nanowires is quite strong in the ultra-violet region but an appreciable absorption is also present in the visible region for the larger diameter nanowires. The present results indicate the possibility of engineering the properties of nanowires by manipulating their diameter and surface structure. The presently predicted smaller diameter GaN nanowire possessing the triangular cross-section should be observable in the experiments.