微型气相色谱仪热导检测器放大电路设计

Agilent公司生产的Agilent 3000+系列色谱仪是微型气相色谱仪(micro GC)的典型代表,其热导检测器的信号放大电路和模数转换器(analog-to-digital convertor, ADC)存在功耗大、工作温度过高等不足.文中分析了micro GC电路的功能需求,从选用低噪声的24 bit Δ-Σ ADC ADS1255入手,设计了高共模电压容限、低噪声的全差分放大电路及其他外围电路,并且对全差分放大电路建立了噪声模型,计算了其噪声理论值,优化了系统设计参数.另外,还设计了一个测试平台,对所设计的全差分放大电路和ADC的性能进行了全面的测试评估,结果表明新设计的热导检测器放大电路与ADC的总噪声(以美国材料与试验协会(ASTM)标准值计)仅为1.25 μV,总功耗降低了3.7 W,满足micro GC的功能需求,而且可靠性高、体积小、结构简单,可用于新一代micro GC的研发和生产.     

合肥光源相空间测量

 介绍了在合肥光源（HLS）上的相空间测量系统和测量结果,同时进行了工作点(Tune值)的计算。研究了电子储存环上三种相空间测量和计算方法：双位置单圈法、单位置双圈法和单位置单圈法。通过对仿真数据的计算和比较,论证了这三种方法的正确性和可行性,并分析了这三种方法的适用条件和在不同条件下的优缺点,为合肥光源的相空间测量提供了新的设计思路。     

基于开关控制的兴趣实验设计

设计了开关控制实验,专门对常见的开关特点及使用进行探讨,根据开关特点搭建相应的控制电路,用近似于工程项目的形式锻炼学生对开关的灵活应用,激发了学生实验的兴趣和积极性.     

Zero Current Potentiometry for Measuring the Interface Potential at the Electrode/Solution Interface. Theoretical and Experimental Study

A novel electrochemical approach has been proposed to measure the interface potential at the electrode/solution interface based on reconstructing the three‐electrode system of a potentiostat. In this work, the method was investigated both theoretically and experimentally. Mathematical expressions, describing current? potential characteristics, were derived. Zero current potential E_zcp was defined as the potential at which the current is zero based on linear sweep voltammetry, and was determined from the I? E curve to measure the interface potential. The experimental results obtained with the couples Fe(CN)₆^3?/Fe(CN)₆^4? and Co(NH₃)₆³⁺/Co(NH₃)₆²⁺ as examples agreed well with the theory. The proposed approach exhibits an excellent performance for measuring the interface potential due to the advantages of rapidity, high stability and accuracy.     

Electrical Impedance Spectroscopic Study of CNT/Ethylene-alt-CO/Propylene-alt-CO Polyketones Nanocomposite

Impedance spectroscopy was utilized to investigate the dielectric properties, ac conductivity and charge transport mechanisms in propylene-alt-CO/ethylene-alt-CO (EPEC) random terpolymer filled with multi-walled carbon nanotubes (MWCNT) as a function of nanofiller content, frequency, and temperature. Equivalent resistor-capacitor (RC) circuit models were proposed to describe the impedance characteristics of the unfilled terpolymer and the nanocomposite at different temperatures. For the nanocomposites, the ac conductivity tended to be frequency independent at low frequencies. At high frequencies, the ac conductivity increased with frequency. The dc conductivity (i.e., plateau of the ac conductivity at low frequencies) at room temperature increased from 10^?9 (Ω·m)^?1 for the unfilled polymer to l0^?3 (Ω·m)^?1 for the 6 wt% MWCNT/EPEC nanocomposite. At low temperatures, the equivalent RC model for EPEC-0 and EPEC-2 was found to consist of a parallel RC circuit. However, for 6 wt% MWCNT/EPEC nanocomposite, an RC model consisting of an R/constant phase element (CPE) circuit and a resistor in series was required to describe the impedance behavior of the nanocomposite.     

Realization of superposition and entanglement of coherent and squeezed states in circuit quantum electrodynamics

We propose a new scheme for generating the superposition and entanglement of the coherent states and squeezed states by considering N superconducting charge qubits (or artificial two-level atoms) interacting with photons in a high finesse cavity on a chip, assisted by a strong driving field. By virtue of the parameters of this system, we can generate novel quantum states, for example, multiparty entangled states and Schro¨dinger cat states among the superconducting qubits, coherent states and squeezed state...     

The side chain effects on TPD-based copolymers: the linear chain leads to a higher jsc

Abstract

Alkyl substituents appended to polymers play the determining role on self-assembly and film-forming properties, and on device performance. In this work, we highlight the effects of the linear and branched flexible chains appended to the acceptor moiety (A) in D-A type copolymers. Two thieno[3,4-c]-pyrrole-4,6-dione (TPD) based copolymers PT1 and PT2 with different alkyl chains, were designed and synthesized. By comparison their UV-vis absorptions, HOMO/LUMO energy levels, as well as the characters in polymer solar cells, the influences of alkyl chains were investigated. Both copolymers showed molecular weights of 21?kDa and similar optical properties with a medium band gap of 1.93?eV, while PT2 with the branched chain exhibited a lower HOMO than that of PT1 (?5.43 vs???5.37?eV). In bulk heterojunction (BHJ) solar cells, PT1 with a linear chain presented a short circuit current (J_sc) of 6.76?mA cm^?2, open circuit voltage (V_oc) of 0.89?V and power conversion efficiency (PCE) of 2.92%. To the contrary, PT2 showed a J_sc of 3.53?mA cm^?2, V_oc of 0.99?V, delivering a relatively lower PCE of 2.05%. The result indicates that appending a linear alkyl chain to the TPD unit could sufficient enhance the J_sc value of the related polymer.     

基于单片机和光电开关的通用计数器设计

At presrent, the photoelectric switch is more and more widely used in the industrial automation equipment.It can be finished counting industrial products by using the characteristic of the photoelectric switch which can detect the objects without touching them. This design uses the modular design method,including power-supply module, The photoelectric conversion module, optocoupler isolation circuit module, power off protection module, matrix keyboard module, counting module and The display module. It mainly uses 51 single-chip microcomputer to control the system,uses the keilC51 software to design program,uses the Proteus software to complete the simulation. Through the experiment, it proves the design is feasible.     

异构多核系统中跨时钟域的解决方法

随着集成电路的集成度与性能的不断发展,芯片的功耗问题已经变的十分严重,功耗带来的挑战日益突出。异构多核动态调频架构是目前研究低功耗的主流方向。SOC系统当中同一时刻只有一个处理器能够控制总线,其它处理器则处理等待状态,异构多核动态调频架构能够通过降低不控制总线的处理器频率来达到降低功耗的目的。异构多核领域的处理器和总线跨时钟域解决方案,此方案在国内属于首次提出,可以运用在异构多核动态调频(DFS)架构当中。目前手持终端设备越来越强调功耗的重要性,因此异构多核领域的处理器和总线跨时钟域解决方案将有非常好的应用前景。该方案通过在处理器和AMBA总线之间添加FIFO以及一些复杂的算法,达到消除亚稳态和正常通信的目的。最终,通过仿真发现任意调节处理器的工作频率都能满足传输协议。证明该方案能在异构多核动态调频架构中运用。     

Operating principles of the cerebral cortex as a six-layered network in primates: beyond the classic canonical circuit model

The cerebral cortex performs its computations with many six-layered fundamental units, collectively spreading along the cortical sheet. What is the local network structure and the operating dynamics of such a fundamental unit? Previous investigations of primary sensory areas revealed a classic “canonical” circuit model, leading to an expectation of similar circuit organization and dynamics throughout the cortex. This review clarifies the different circuit dynamics at play in the higher association cortex of primates that implements computation for high-level cognition such as memory and attention. Instead of feedforward processing of response selectivity through Layers 4 to 2/3 that the classic canonical circuit stipulates, memory recall in primates occurs in Layer 5/6 with local backward projection to Layer 2/3, after which the retrieved information is sent back from Layer 6 to lower-level cortical areas for further retrieval of nested associations of target attributes. In this review, a novel “dynamic multimode module (D3M)” in the primate association cortex is proposed, as a new “canonical” circuit model performing this operation.