Towards advanced circuit board materials: adhesion of copper foil to ultra‐high molecular weight polyethylene composite

Polyethylene based composites are attractive materials for advanced circuit board applications because of their unique combination of properties: low dielectric constant and loss factor, light weight, high flexural modulus and low thermal expansion coefficient controlled in all spatial directions. This investigation describes a process to consolidate chopped fibers of ultra‐high molecular weight polyethylene concurrently with its bonding to a copper foil. Bonding is affected by a thin sheet of low‐density polyethylene, incorporating a crosslinking agent with a concentration gradient across the sheets thickness. In this single step process, the composite material is formed and bonded to the metal foil, achieving good adhesion without the use of extraneous glue. Copyright © 2002 John Wiley & Sons, Ltd.     

废弃线路板化学分析采样、制样及检测方法

介绍废弃线路板中有回收价值元素和有害物质分析的采样、制样及检测技术。样品经过分类采样、剪切破碎和高温灰化制样,采用样品全分析或副批混合样分析。通过提高称样量、多次测定求平均值的办法,火试金富集-重量法测定贵金属金、银。湿法王水溶解样品,碘量法测定主体元素铜。电感耦合等离子体发射光谱(ICP-AES)法测定其它杂质元素,被测元素质量浓度在0~10μg/mL范围内与光谱强度呈良好线性关系,相关系数均大于0.9998。测定结果的相对标准偏差小于10%(n=5),加标回收率为97.0%~102.5%。该方法简单、快速,有效地解决了线路板样品不均匀而难采样,以及硬度、韧性强制样难,金属易包裹难分解的技术瓶颈,测定结果准确,具有代表性。该方法适用于废弃线路板化学成分分析,其它废弃电子产品检测可参考此方法。     

Novel method for bulk resistance evaluation in conductivity measurement for high-purity water

A major issue with the electrolytic conductivity measurement for pure water is the lack of standard or reference methods. A primary method traceable to SI and suitable for pure-water conductivity measurement was developed at the Physikalisch-Technische Bundesanstalt (PTB), Germany, as the base for the calibration method for the conductivity measuring devices at the low conductivity level. This paper provides a novel method to calculate the bulk resistance of pure water using impedance measured at a single frequency, which is one of the key procedures for the primary methods.     

镍电极开路电位测定微量硼氢根离子

实验采用循环伏安法，用镍电极代替铂铑等贵金属电极测定了碱性体系中不同硼氢根离子浓度下的开路电位，得出了研究电极的开路电位（-0．355～-0．280vs.SCE／V）与微量硼氢根离子浓度的对应关系，并用于监测电解偏硼酸钠制备硼氢化钠体系中微量硼氢根离子，同时计算了该方法的误差。结果表明，测量结果的相对标准偏差为2．2％；回收率为98．4％。该法简单、快速，可测定10^-5～10^-3mol／L范围的硼氢根离子浓度。     

Examination of the statistical method in the conjugated circuit theory

Summary The recently proposed statistical method for the calculation of resonance energies in the conjugated circuit theory is tested on the example of polyacenes. It is found that for the estimation of the resonance energy with a 10% average error, the method requires a sample consisting of about 20 (randomly chosen) Kekulé structures. Further increase of the sample size gives no significant gain in the accuracy of the method.

---

Überprüfung der statistischen Methode in der Konjugierten-Ring-Theorie

Zusammenfassung Die unlängst vorgeschlagene statistische Methode in der Konjugierten-Ring-Theorie (conjugated circuit theory) wird am Beispiel der Polyacene getestet. Es wurde festgestellt, daß für die Abschätzung der Resonanzenergien bei einem mittleren Fehler von 10% für diese Methode ungefähr 20 (willkürlich gewählte) Kekulé-Strukturen nötig sind. Weitere Erhöhung dieser Anzahl bringt keine signifikante Verbesserung der Genauigkeit der Methode.

     

Fluorinated compounds for advanced IC interconnect applications: a survey of chemistries and processes

The semiconductor industry is now in the early stages of an unprecedented change in materials set for the integrated circuit (IC) interconnect structure. The traditional layers of aluminum conductors and silicon dioxide dielectrics are being replaced by copper thin films and a variety of low k candidates, respectively. In many cases, fluorine confers desirable properties on either the precursors or the final films. At the same time, fluorine presents some potentially adverse effects, which have led to a so-called “fear-of-fluorine” in interconnect applications. This paper will review the proposed uses of fluorinated compounds in the interconnect structures, covering both precursors and the resulting thin films. Both the status of technical studies, and the prospects for commercial implementation, will be addressed.     

压电石英晶体在电解质水溶液中的振荡性能研究(Ⅱ)——频率、频移特性

根据两面电极浸入液体中的压电晶体等效电路模型和Pierce振荡器振荡方程的解,得到晶体在电解质溶液中的振荡频率(F_1)与溶液电导率(x)的关系式:F_1=(1/2π)(1/C_1+1/C_2)(1/X_e)[(R_e~2+X_e~2)x~2+2R_ex+1]。以自行设计的Pierce晶体振荡器。研究了晶体和主振电路参数、输入电压及检测池外壳屏蔽接地对AT切9MHz石英晶体在KCl、Na_2SO_4水溶液中的频率、相对于纯水频移随溶液电导率变化的影响规律,结果与上式相符。     

脉冲激光引信用PFM和PWM式LD驱动电路的研究

 在激光引信的通讯系统中，针对引信用脉冲式半导体激光器驱动电路的脉冲宽度、频率、功率可调的需要，根据LD驱动电路的工作原理，建立了LD驱动电路的一般模型。然后用电子多频振荡器提供驱动信号，用双MOS驱动器来驱动半导体激光器，通过大量的实验、仿真、分析、比较，设计出了方便可调的大功率LD的驱动电路，该电路的脉冲频率和脉冲宽度可方便调整。并且该驱动电路的频率调节范围大（10Hz~20kHz）；脉冲宽度可以从几ns到几百ns进行调节，大大提高了激光引信通讯系统的性能与可靠性。     

基于开关控制的兴趣实验设计

设计了开关控制实验,专门对常见的开关特点及使用进行探讨,根据开关特点搭建相应的控制电路,用近似于工程项目的形式锻炼学生对开关的灵活应用,激发了学生实验的兴趣和积极性.     

Zero Current Potentiometry for Measuring the Interface Potential at the Electrode/Solution Interface. Theoretical and Experimental Study

A novel electrochemical approach has been proposed to measure the interface potential at the electrode/solution interface based on reconstructing the three‐electrode system of a potentiostat. In this work, the method was investigated both theoretically and experimentally. Mathematical expressions, describing current? potential characteristics, were derived. Zero current potential E_zcp was defined as the potential at which the current is zero based on linear sweep voltammetry, and was determined from the I? E curve to measure the interface potential. The experimental results obtained with the couples Fe(CN)₆^3?/Fe(CN)₆^4? and Co(NH₃)₆³⁺/Co(NH₃)₆²⁺ as examples agreed well with the theory. The proposed approach exhibits an excellent performance for measuring the interface potential due to the advantages of rapidity, high stability and accuracy.