Splitting-on-demand optical power splitters using multimode interference (MMI) waveguide with programmed modulations

Reconfigurable multi-channel optical power splitter is proposed and its optical properties are calculated. The device can dynamically reconfigure the number of splitting channels by providing programmed refractive index modulations on a multimode interference (MMI) waveguide. A reconfigurable 3-channel optical power splitter is designed to work as 1 × 1, 1 × 2 or 1 × 3 optical power splitter depending on the state of the heat electrodes using thermo-optic modulation, and the input light can be distributed to three output channels with sequential orders. The device can work in the whole C-band (1530-1565 nm) with extinction ratio better than −29.0 dB, excess loss better than −0.45 dB, imbalance better than 0.08 dB and polarization dependent loss (PDL) better than 0.14 dB. The design conception is scalable to a multi-channel splitting-on-demand optical power splitter which can divide input light to 1, 2, …, N output channels equally by using the 3-channel reconfigurable optical power splitter as a building block.     

High-speed transmission limitations due to Polarization Mode Dispersion

In this paper, the impacts of Polarization Mode Dispersion (PMD) on the performance of high-speed optical communication system have been reported at different bit rates. The two systems are modeled using older fibers with same PMD coefficient at different bit rates and third is with the new fiber with less PMD coefficient than that of the previous two. The attenuation, chromatic dispersion and non-linear effects have been disabled, so that all the variation of the results is due to PMD. The bit rate is varied from 2.5 to 40 Gbps and the length is varied from 1000 to 20,000 km. It is shown that the impact of PMD increases with the bit rate of system. It is also reported that the impact of PMD becomes intolerable at the bit rates of more than 40 Gbps. And also the PMD produces very minute impact on the system performance for same bit rate with the variation in the fiber length.     

An evaluation method for measuring SPL and mode shape of tire cavity resonance by using multi-microphone system

This paper presents an evaluation method for measuring the sound pressure level and mode shapes of tire cavity resonance by using a multi-microphone system. Two commercial tires were evaluated to compare abilities of noise suppression by means of this method in the range of the first resonance from 200 to 260 Hz. One tire was a special tire that suppresses tire cavity resonance with polyurethane foam mounted on the tire’s inner liner. The other tire was a normal tire with no polyurethane foam. The mode shape change from vertical to horizontal direction in both tires. However, the sound pressure level of the special tire was lower than the normal tire at all frequencies.     

基于p1-p2与a1+a2共同本征态的相干纠缠态表象的构建及性质

利用有序算符乘积内的积分技术（IWOP）,建立了一种称之为相干纠缠态的两粒子体系的新表象,研究了这种新表象的性质,从理论上探讨了这种相干纠缠态的产生方法.结果表明：本文建立的这种p₁-p₂与a₁+a₂的共同本征态|p,β〉,既具有相干态的特性,又体现了纠缠态的特征,具有超完备性,完全可以作为一个表象使用. 物理上可以用光分束器来实现|< 关键词： IWOP技术 相干纠缠态表象 分束器     

一种新型的二元光学器件——多位相光束分束器的制作

本文报道了用于多光束分束器的反射式16位相值二元光学器件的制作。该二元光学器件把一束光束分成5×5光束阵列。测量的衍射效率为76.16%,接近理论设计值79.68%。该二元光学器件的有效孔径为10mm×10mm。     

BPM-FSRM混合法分析SOI脊形波导与光纤耦合

用束传播-自由空间辐射模（BPM-FSRM）混合法计算了SOI脊形波导和光纤耦合时的透射率, 提出计算反射率的积分公式. 将该混合法和一般FSRM、菲涅尔公式-重叠积分法的计算结果相比较, 提出只有在弱导条件下, 传统的菲涅尔公式法和重叠积分法才可以同时使用.     

TM01-TE11三弯曲圆波导模式转换器

 从理论推导、理论设计和数值模拟3个方面对三弯曲圆波导模式转换器进行分析,得到了TM₀₁-TE₁₁模的功率转换效率解析公式和转换效率达到最高时的取值条件。以中心工作频率为4.25 GHz、波导半径分别为3.0 cm和3.5 cm的两个转换器为例进行了理论计算和数值模拟,模拟结果表明：它们的转换效率分别达到了99.64%和98.62%,高于90%的相对带宽分别达到了9.88%和12.71%。     

Efficient Scheme for Entangling Two Distant Atoms

A scheme is presented for the generation of entangled states for two atoms trapped in two distant cavities. In the scheme each atom is resonantly coupled with the respective cavity mode and driven by a strong classical field. The detection of a photon decaying from the cavities and passing through a beam-splitter collapses the atoms to an entangled state. The required atom-field interaction time is very short and thus the decoherence effect is suppressed. Our scheme is within the reach of presently available cavity QED techniques.     

基于宽度可调节的线缺陷平板型光子晶体的空气槽微腔

研究了一种空气槽光子晶体微腔,这种腔是由在平板型光子晶体上引入一条宽度可以调节的线缺陷空气槽形成的.腔模的电场被强烈局限在空气槽中,由于介电常量的不连续性,电场得到很大的提高,同时模体积被大大地降低.数值模拟与分析了微腔的能带结构和场分布,考虑到腔模的谐振频率和对称性,发现一阶偶膜同时具有较高的品质因子和较小的模体积;应用有限时域差分法,得到腔模的品质因子可以高达10⁶,模体积仅为0.02(λ/n)³.计算了一阶偶模谐振波长随空气槽宽度以及空气孔半径的变化,发现随着宽度的增加,波长越来越短.而随着空气孔半径的增加,波长近似线性地减小;当空气孔半径为170 nm时,可以获得最高的腔品质因子.