用快波加热燃烧等离子体

在把离子伯恩斯坦波处理成对快阿尔芬波的响应下，导出了点火托卡马克等离子体的离子回旋共振加热的二阶模转换方程。这个二阶方程的数值积分表明，结果与由高阶方程的计算很好地一致。只有在弱阻尼的情况下，α粒子吸收的功率才是重要的。     

Second-order bragg interaction in double grating couplers: TM mode

An analytical treatment of the second-order Bragg interaction is presented for the transverse magnetic mode of a dielectric film waveguide having gratings on both the film-cover and the film-substrate interfaces. Four canonical equations that describe the interactions of two guided waves propagating in the opposite directions in the film and the normally incident and radiated free waves in the cover and the substrate are deduced.     

室温下聚四氟乙烯的压致相变

用激光拉曼光谱研究了PTFE在室温下的压致相变,压致Ⅳ-Ⅱ和Ⅱ-Ⅲ相变时,相应的拉曼光谱都有明显的变化,讨论了压致相变时的构象变化.用Tait方程和Murnaghan方程处理等温压缩数据,也发现了Ⅱ-Ⅲ压致相变.首次计算了高压相的模Gruneisen参数.     

Fabrication of Spot Size Converters for Optical Chemical Sensors by Distributed-Field-Assisted Ion-Exchange

We propose a new method for fabricating optical waveguides with nonuniform thickness by controlling the electrical field distribution during the field-assisted ion-exchange. We refer to this method as distributed-fild-assisted ion-exchange. The distribution of the intensity of the electrical field was simulated for different electrode configurations, and was compared with experimental diffusion depth distribution of K⁺—Na⁺ exchange in sodalime slide glass. A unique bath was designed for the distributed-field-assisted ion-exchange. Using a three-electrode configuration, we obtained, for instance, a 2 cm-long spot size converter with thickness changes of from 12 μm to 2 μm. This technique can be used to fabricate waveguides for optical chemical sensors.On leave from State Key Laboratory of Transducer Technology, Institute of Electronics, Chinese Academy of Sciences, Beijing, China 100080.     

Mode-locked lasers and ultrashort light pulses

This article reviews some aspects of the generation of very short optical pulses using mode-locked lasers, with the emphasis laid on pulsed laser systems. Active and passive mode-locking is discussed, and the problem of measuring ultrashort light pulses is considered. A survey of some commonly used sources and techniques for the generation of ultrashort light pulses follows. The paper concludes with a short account of limitations in the generation and propagation of these pulses.     

真空紫外/可见光纳秒条纹相机的研制

ZNT-500K真空紫外/可见光纳秒条纹相机已研制成功,在研制过程中,研制了新型变象管,较好地解决了MgF²晶体和科伐材料的高真空封接,合理地确定了导电基底的材料和厚度,使光谱响应和透过率都满足要求;合理地确定扫描电路和电路参数,使该相机具有了光谱响应范围宽和扫描时间范围宽两大特点。     

10-Gbit/s Serial Optical Interconnection for an ATM Switch

Serial optical interconnection is proposed for connections in a Torus asynchronous transfer mode switch. A cross-point switch was developed that operates at a bit rate of 20 Gbit/s. The switching operation was successfully performed using cascaded cross-point switches through an optical interconnection configuration consisting of commercial optoelectronics devices. The measured switching rate was 10 Gbit/s, and it was limited by the responses of the optoelectronics devices.     

斜坡补偿电流模式控制开关变换器的动力学建模与分析

降压型、升压型和升压-降压型DC-DC变换器是应用广泛的基本开关DC-DC变换器.电流模式控制开关DC-DC变换器在较宽的电路参数范围内具有两个边界,基于开关切换前后电感电流的上升和下降斜率,建立了斜坡补偿电流模式控制开关DC-DC变换器的统一模型.该模型进行无量纲归一化处理后只有三个参数,可有效展示开关DC-DC变换器在电感电流连续传导模式(CCM)和电感电流不连续传导模式(DCM)时的动力学特性.利用此模型,导出了轨道状态发生转移时的两个分界线方程,由此确定了开关DC-DC变换器的稳定周期1域、CCM鲁棒混沌域和DCM弱混沌强阵发域三个工作状态区域.开关DC-DC变换器二维参数映射图和电流模式控制降压型DC-DC变换器的电路实验观察验证了由两条分界线划分工作状态域的正确性.     

基于经验模态分解的高光谱遥感数据去噪方法

经验模态分解(EMD)是一种新的时频分析方法,经EMD分解后的各个固有模态函数(IMF)突出了原始信号的局部特征,从而可以区分噪声和有用信号。基于此,结合高光谱遥感数据的光谱变化特征,提出了一种基于经验模态分解的高光谱遥感数据去噪方法。通过对理论数据的实验表明,数据中的噪声无论是高斯分布还是均匀分布,数据经EMD分解后,噪声都主要集中在前几个特定的IMF,对相应的IMF进行滤波处理后并与其他IMF分量进行重构就可得到去噪信号,与小波去噪结果相比较,这种方法效果更好。最后把该去噪方法应用于野外实测的油膜高光谱数据去噪,实验结果表明,该方法能准确、有效地去除高光谱遥感数据的噪声。     

Attosecond‐precision ultrafast photonics

We review our recent progress toward attosecond‐precision ultrafast photonics based on ultra‐low timing jitter optical pulse trains from mode‐locked lasers. In femtosecond mode‐locked lasers, the concentration of a large number of photons in an extremely short pulse duration enables the scaling of timing jitter into the attosecond regime. To characterize such jitter levels, we developed new attosecond‐resolution measurement techniques and show that standard fiber lasers can achieve sub‐fs high‐frequency jitter. By leveraging the ultra‐low jitter of free‐running mode‐locked lasers, we pursued high‐precision optical‐optical and optical‐microwave synchronization techniques. Optical signals spanning 1.5 octaves were synthesized by attosecond‐precision timing and phase synchronization of two independent mode‐locked lasers. High‐stability microwave signals were also synthesized from mode‐locked lasers with drift‐free sub‐10‐fs precision. We further demonstrated the attosecond‐precision distribution of optical pulse trains to remote locations via timing‐stabilized fiber links. Finally, the application of optical pulse trains for high‐resolution sampling and analog‐to‐digital conversion is discussed.