基于轴角转换器的一种高精度动态测角系统

设计了一种基于轴角转换器AD2S80的高精度感应同步器动态测角系统，分析了测角误差产生原因，提出了误差调整和补偿措施。通过实例数据表明：用谐波分析的方法对测角误差进行了调整与补偿，从而可大幅度提高测角精度。     

Control of resonant peak depths of tunable long-period fiber gratings using overcoupling

We present a method to reduce changes in the resonant peak depth of a long-period fiber grating (LPFG) as the resonant band is tuned by varying the external refractive index. We theoretically analyze the effects of the initial coupling strength on the peak depth change as external refractive index is varied. By controlling the initial coupling strength, it is experimentally demonstrated that an optimum peak depth can be obtained over a range of operating wavelengths that will maximize the sensitivity and stability of LPFG based sensors and tunable filters.     

Study on inverse taper based mode transformer for low loss coupling between silicon wire waveguide and lensed fiber

We have simulated the coupling loss of three types of Inverse Taper and taper-lensed fiber using three dimensional (3D) semi-vectorial beam propagation methods (BPM) respectively. Our results showed that the performances of exponential inverse taper and quadratic inverse taper were better than the commonly used linear inverse taper. Especially, for TM mode the improvement in the reduction of devices size is 53% and 136% for exponential and quadratic inverse taper compared with the linear inverse taper.     

Emulator with inverse trend in first-order and second-order polarisation mode dispersion

We design a polarisation mode dispersion (PMD) emulator through subdividing a polarisation maintaining fibre (PMF) of 22 m in length. The aim of this emulator design is to show that first-order and second-order PMD can be inversely proportional to each other. Furthermore, the emulator is also used to show that the magnitude of PMD is independent to whether its statistics approach theoretical distributions or not, of most importance is the degree of mode coupling. The same (as former) applies to its autocorrelation function (ACF). The PMD control mechanism for the emulator is not in real time.     

低过模高功率微波方圆模式转换器设计

 设计了一种结构简单的高功率微波方圆模式转换器,可以实现圆波导TM₀₁模式与矩形波导TE10模式之间的相互转换。转换器工作在C波段,中心频率4.1 GHz,其输入端口和输出端口相互垂直。计算和仿真结果表明:中心频率处该模式转换器的转换效率可达99%,回波损耗小于-20 dB,转换效率大于90%的带宽大于0.2 GHz。转换器整体3维尺寸都只有10 cm左右。     

W波段TE62-TEM00准光模式变换器

对准光模式变换器的基本理论和设计方法进行了讨论.以改进型等效电流理论为基础给出了Vlasov辐射器的分析方法,建立了数值模型,并进行了计算分析.继而推导了自适应相位修正Katsenelenbaum-Semenov算法,编制了相位修正反射镜自适应设计分析程序.在上述理论工作的基础上,针对3 mm波段TE62至TEM00准...     

不同开关频率下电压控制升压变换器中的Hopf分岔分析

由于电压控制升压变换器的传统平均模型中没有包含开关频率,从而无法分析开关频率的大小对电压控制升压变换器中Hopf分岔的影响. 通过建立电压控制升压变换器的含有开关频率的改进平均模型,分析了开关频率对电压控制升压变换器中Hopf分岔的影响,并设计硬件电路,给出电路试验结果. 研究表明:采用电压控制升压变换器的改进平均模型,可以有效地分析不同开关频率对电压控制升压变换器中Hopf分岔的影响; 随着开关频率的减小,电压控制升压变换器更易于发生Hopf分岔. 关键词： 改进平均模型 电压控制升压变换器 开关频率     

HL—1装置密度极限破裂分析

HL-1装置上观测到大量的密度极限破裂放电。其主要特性是破裂前偏离几何中心的磁面位移很小,中心区总是观测到锯齿现象,破裂后,其电流中断时间大于20ms。本文详细分析了出现在电流上升段,坪段及下降段密度极限破裂的特征。其中一类是由于辐射功率超过加热功率所确定的村上极限,没有观测到先兆振荡;另一类是由于约束变坏所确定的赫吉尔极限,可观测到驰豫几毫秒的先兆振荡,这类放电破裂后多数能恢复。该装置运行的最大村上参数是0.35×10~(20)m~(-2).T~(-1)。     

高功率毫米波圆波导TM01—TE11模式变换分析

 在数值研究高功率毫米波TM₀₁—TE₁₁光滑弯曲圆波导模式变换的基础上，对弯曲波导的几何结构进行了优化分析。在模式耦合理论的基础上，优化出了比较好的几何结构，并发现了圆波导半径、弯曲圆波导曲率和频率以及频带宽度之间的变化规律。以此数据设计的模式变换器的转换效率可达99%，带宽超过29.8%。     

Leaky Characteristics of Modified NRD Guide with Finite Parallel Plate Length

Leaky wave characteristics of modified NRD (Nonradiative Dielectric) guide with parallel plate length are systemically investigated. A technique is used to investigate the leaky property of the guide structure, whichis formulated by effectively combining the multimode network theory with the mode-matching method. In the paper, two phenomena are carefully studied: First, the asymmetric position of the dielectric rod generates a leaky hybrid mode that could produce cross talk between components of the circuit. Second, when the length of metallic plate is finite, another type of leaky mode creates which influences and even couples to the normal leaky guide mode under appropriate circumstances.