Fraunhofer Diffraction Pattern by a Slit Aperture between a Knife Edge and a Metal Cylinder

The Fraunhofer diffraction pattern of an aperture formed between a knife edge and a smooth surface of a turned metal cylinder or half cylinder is different from the diffraction pattern of an ideal slit aperture. The diffraction pattern is simulated by adding the light reflected by the cylinder surface to the pattern formed by a slit, and is measured using a cylinder that has been partly cut away so that it can represent either a full or half cylinder. The theoretical and measured patterns agree well with each other.     

Real-Time Reconfigurable Interconnections for Parallel Optical Processing

In this letter we describe the advantages of a dynamic optical interconnection system for parallel information processing applications. The system is based on a liquid crystal television which acts as a binary phase-only spatial light modulator. We describe example algorithms where reconfigurable interconnects would be useful and present results of several interconnection topologies which have been implemented.Presented at the International Commission for Optics Topical Meeting, Kyoto, 1994.     

Stable edge dislocations in finite crystals

Dislocations have been considered as mechanically unstable defects in bulk crystals, ignoring the Peierls oscillations. Eshelby [J. Appl. Phys. 24 (1953) p.176] had showed that a screw dislocation can be stable in a thin cylinder. In the current work, considering Eshelby's example of an edge dislocation in a single crystalline plate, we show that an edge dislocation can be stable in a finite crystal. Using specific examples, we also show that the position of stability of an edge dislocation can be off-centre. This shift in the stability from the centre marks the transition from a stable dislocation to an unstable one. The above-mentioned tasks are achieved by simulating edge dislocations using the finite element method.     

Design of interdigital transducers for crack detection in plates

Interdigital transducers (IDT) for non-destructive evaluation (NDE) of cracks in plates are designed based on an analytical model established previously. Key considerations include mode selectivity, excitation strength, collimation of wave and cost. The advantage of mode selectivity of IDT over PZT patch is presented both analytically and experimentally. Effects of parameters, namely finger spacing, width, length, number of fingers, and the size of IDT, on the excitation strength and mode selectivity are considered. This led to the design of a mobile double-sided IDT as an efficient device where excitation strength is strong and focused. The device was fabricated in-house using commercially available piezoelectric ceramics and used to develop a procedure for accurate identification of the direction and extent of cracks in plates. Three aluminum plates, one with a linear deep crack, another with a piecewise linear shallower crack and the third with a curved crack, were used to illustrate the accuracy and efficiency of both the proposed device and procedure for effective NDE.     

叶片锯齿尾缘对降低空调室外机气动噪声影响的试验研究

依据现有的叶片尾迹宽度计算公式,计算了一空调室外机风机叶片的尾迹宽度,然后,以此尾迹宽度为参考基准,设计了两组不同形状和大小的锯齿形叶片尾缘,制作并试验研究了锯齿形尾缘对风机气动噪声的影响规律。结果表明,锯齿尾缘有明显降噪效果,正弦形锯齿较正三角形更好。锯齿尾缘通过降低宽频噪声降噪,而对离散噪声影响很小。采用与叶片尾迹...     

强激光远场焦斑重构算法研究

通过CCD图像采集单元结合传统的列阵相机测量高功率固体激光器的远场焦斑分布,采用图像处理技术的边缘算子提取焦斑的几何中心,提出通过几何中心对心的焦斑嵌套重构算法,解决了光斑饱和时的对心难题,实现了快捷准确测量激光焦斑,为激光器的实时控制提供参考数据。     

A hybrid level set method for modelling detonation and combustion problems in complex geometries

We present an accurate and fast wave tracking method that uses parametric representations of tracked fronts, combined with modifications of level set methods that use narrow bands. Our strategy generates accurate computations of the front curvature and other geometric properties of the front. We introduce data structures that can store discrete representations of the location of the moving fronts and boundaries, as well as the corresponding level set fields, that are designed to reduce computational overhead and memory storage. We present an algorithm we call stack sweeping to efficiently sort and store data that is used to represent orientable fronts. Our implementation features two reciprocal procedures, a forward ‘front parameterization’ that constructs a parameterization of a front given a level set field and a backward ‘field construction’ that constructs an approximation of the signed normal distance to the front, given a parameterized representation of the front. These reciprocal procedures are used to achieve and maintain high spatial accuracy. Close to the front, precise computation of the normal distance is carried out by requiring that displacement vectors from grid points to the front be along a normal direction. For front curves in two dimensions, a cubic interpolation scheme is used, and G ¹ surface parameterization based on triangular patches is used for the three-dimensional implementation to compute the distances from grid points near the front. To demonstrate this new, high accuracy method we present validations and show examples of combustion-like applications that include detonation shock dynamics, material interface motions in a compressible multi-material simulation and the Stephan problem associated with dendrite solidification.     

非近邻跳跃对扶手椅型石墨烯纳米带电子结构的影响

根据π电子的紧束缚模型,将电子的次近邻和第三近邻跳跃能考虑在内,得到扶手椅型石墨烯纳米带（AGRNs）能带结构的解析解.讨论了由次近邻和第三近邻电子跳跃引起的能带和能隙变化,发现次近邻和第三近邻跳跃分别对带隙产生增大和减小的影响. 比较了边界弛豫与非近邻跳跃之间的互相竞争关系. 当纳米带的宽度n为奇数时,二维石墨面的紧束缚模型中所固有的van Hove奇异性表现为AGRNs中的无色散带. 当AGRNs宽度增加时,能谱趋向于二维石墨烯时的能谱结构. 关键词： 扶手椅型石墨烯纳米带 非近邻跳跃 边界弛豫 电子结构     

基于无人机高光谱特征参数和株高估算马铃薯地上生物量

地上生物量(above-ground biomass,AGB)是评价作物长势及其产量估测的重要指标,对指导农业管理具有重要的作用.因此,快速准确地获取生物量信息,对于监测马铃薯生长状况,提高产量具有重要的意义.于马铃薯现蕾期、块茎形成期、块茎增长期、淀粉积累期、成熟期获取成像高光谱影像、实测株高(heigh,H)、地上...