Determination of the valence distribution of vanadium in polyolefin catalysts prepared from vanadium trichloride

An electrochemical method has been developed for determining the relative amounts of V(II) and V(III) in polyolefin catalysts prepared using aluminum alkyls and vanadium trichloride. The catalyst, usually obtained as a slurry in n-heptane, is titrated potentiometrically with ceric sulfate using a platinum indicator electrode. Under proper experimental conditions, 2 breaks are obtained, corresponding to the reactions V(II) →V(III) + e and V(III) →V(IV) + e. Interferences from other components of the catalyst are negligible. The method is useful for the analysis of both laboratory catalysts and grab samples taken from pilot plant reactors.     

Mössbauer Spectroscopic Studies of Supported α-Fe2O3 and Fe Catalysts II: The Effect of the Second Metal Addition

The effect of the addition of a second metals such as Zn and Ni on the calcinaton and reduction of alumina, magnesia and silicasupported iron catalysis with total iron loading of 5wt% is investigated by Mössbauer spectroscopy. It is shown that the reducibility of supported α-Fe₂O₃ is gradually increased by adding the second metal. The values of the magnetic hyperfine field obtained from Mössbauer spectra for the Zn or Ni-added α-Fe₂O₃ or Fe catalysts decreased with increasing second metal loading.     

Mixed dialkyltin(IV) trifluoroacetates

Mixed dialkytin(IV) trifluoroacetates,Me EtSn(O₂CCF₃)₂,Et Pr ⁿ Sn(O₂CCF₃)₂ andPr ⁿ Bu ⁿ Sn(O₂CCF₃)₂ have been prepared by metathetical reactions of the corresponding dialkyltin(IV) chlorides with silver trifluoroacetate in CH₂Cl₂. They are monomeric in benzene and nonconducting inMeNO₂ andMeCN. Bidentate trifluoroacetate groups are indicated by their IR spectra.Mössbauer spectra confirmtrans-arrangement of theR-Sn-R moiety.¹H,¹⁹F NMR and mass spectra are also discussed.

---

Gemischte Dialkylzinn(IV)-trifluoracetate

Zusammenfassung Die gemischten Dialkylzinn(IV)-trifluoroacetateMe EtSn(O₂CCF₃)₂,Et Pr ⁿ Sn(O₂CCF₃)₂ undPr ⁿ Bu ⁿ Sn(O₂CCF₃)₂ wurden über Metathese-Reaktionen der entsprechenden Dialkylzinn(IV)-chloride mit Silbertrifluoracetat in CH₂Cl₂ dargestellt. Sie sind monomer in Benzol und nichtleitend inMeNO₂ undMeCN. Die IR-Spektren zeigen zweizähnige Trifluoracetat-Gruppen an. DieMössbauer-Spektren bestätigen dietrans-Anordnung derR-Sn-R-Einheit. Die¹H-,¹⁹F-NMR und die Massenspektren werden ebenfalls diskutiert.

     

Synthesis and Structureof［（C_2H_5）_4N］［Mo_3（μ_3－O）（μ－Cl）_3（μ－CH_3CH_2COO）_3Cl_3］

ＳｙｎｔｈｅｓｉｓａｎｄＳｔｒｕｃｔｕｒｅｏｆ［（Ｃ_２Ｈ_５）_４Ｎ］［Ｍｏ_３（μ_３－Ｏ）（μ－Ｃｌ）_３（μ－ＣＨ_３ＣＨ_２ＣＯＯ）_３Ｃｌ_３］ＺｈｕａｎｇＨｏｎｇ－Ｈｕｉ；ＷｕＤｉｎｇ－Ｍｉｎｇ；ＨｕａｎｇＪｉａｎ－Ｑｕａｎ；ＨｕａｎｇＪｉｎ－Ｌ...     

Relationship between the molybdenum phases and the conversion of n-butane over Mo/HZSM-5

The conversion of n-C₄H₁₀ was undertaken on MoO₃/HZSM-5 catalyst at 773–973 K and the phases of molybdenum species were detected by XRD. The XRD results show that bulk MoO₃ on HZSM-5 can be readily reduced by n-C₄H₁₀ to MoO₂ at 773 K and MoO₂ can be gradually carburized to molybdenum carbide above 813 K. The molybdenum carbide formed from the carburization of MoO₂ with n-C₄H₁₀ below 893 K is -MoC_1−x with fcc-structure, while hcp-molybdenum carbide formed above 933 K. During the evolution of MoO₃ to MoO₂ (>773 K) or the carburization of MoO₂ to molybdenum carbide (>813 K), deep oxidation, cracking and coke deposition are serious, in particular at higher reaction temperatures, these lead to the poor selectivity to aromatics. Aromatization of n-C₄H₁₀ can proceed catalytically on both Mo₂C/HZSM-5 and MoO₂/HZSM-5, the distribution of the products for the two catalysts is similar below 813 K, but the activity for Mo₂C/HZSM-5 is much higher than that for MoO₂/HZSM-5.     

Magnetic and Electrical Properties, Eu Mössbauer Spectroscopy, and Chemical Bonding of REAgMg (RE=La, Ce, Eu, Yb) and EuAuMg

Single-phase samples of REAgMg (RE=La, Ce, Eu, Yb) and EuAuMg were prepared by reacting the elements in sealed tantalum tubes in a high-frequency furnace. LaAgMg and CeAgMg adopt the hexagonal ZrNiAl-type structure, while EuAgMg, YbAgMg, and EuAuMg crystallize with the orthorhombic TiNiSi type. Chemical bonding was exemplarily investigatedfor EuAgMg and EuAuMg on the basis of TB-LMTO-ASAcalculations. Magnetic susceptibility measurements indicatePauli paramagnetism for LaAgMg and YbAgMg with room-temperature susceptibilities of 2.4(1)×10⁻⁹ and 1.5(1)×10⁻⁹ m³/mol, respectively. CeAgMg remains paramagnetic down to 2 K. The experimental magnetic moment of 2.52(2) μ_B/Ce above 50 K is compatible with trivalent cerium. EuAgMg and EuAuMg are paramagnetic above 50 K with experimentalmagnetic moments of 7.99(5) μ_B/Eu for the silver and 7.80(5) μ_B/Eu for the gold compound, indicating divalent europium. Ferromagnetic ordering is detected at T_C=22.0(3) K (EuAgMg) and T_C=36.5(5) K (EuAuMg). At 4.2 K and 5 T the saturation magnetizations are 7.1(1) and 7.3(1) μ_B/Eu for EuAgMg and EuAuMg, respectively. According to the very small hysteresis, EuAgMg and EuAuMg may be classified as soft ferromagnets. All compounds are metallic conductors. For EuAgMg and EuAuMg freezing of spin-disorder scattering is observed below T_C. At 78 K ¹⁵¹Eu Mössbauer spectra show isomer shifts of −9.00(4) and −8.72(8) mm/s for EuAgMg and EuAuMg, respectively. Full magnetic hyperfine field splitting is detected at 4.2 K with hyperfine fields of 17.4(1) and 18.3(2) T at the europium nuclei of EuAgMg and EuAuMg.     

Surface recombination in breakdown time delay experiments: Effect of different cathode materials

The late afterglow in nitrogen with iron electrode is studied by the breakdown time delay method, i.e., by measuring the breakdown time delay t_d as a function of the afterglow time . It is proposed that the cause of the secondary electrons initiating the breakdown is the energy of the surface recombination of nitrogen atoms on the iron electrode. The gas-phase and macrokinetic diffusive models are used to describe the experimental breakdown time delay data. By fitting the theoretical curve to the experimental data: (1) it has been confirmed that the recombination on the molybdenum glass is of the second order and the value of the surface recombination coefficient is determined at 4 mbar; (2) it has been shown that the surface recombination on the iron electrode is of the second order, and the effective recombination coefficients are determined; (3) the analytical form of the recombination coefficient as a function of the adsorption characteristics of surfaces and the pressure of the parent gas has been derived. In addition, the orders of surface recombination on the molybdenum-, aluminum-, and gold-plated electrode were determined by the same method.     

Mössbauer Spectroscopic Studies of Ferrocenylaldimines and their TCNQ Complexes

A series of ferrocenylaldimines (Fc-CH=N-R) has been prepared by Schiff base condensation of formylferrocene with polyacenylamines RNH₂ where R = naphthyl, 5,6,7,8-tetrahydronaphthyl, anthracenyl, and pyrenyl groups. This step was followed by oxidation with TCNQ to give [Fc-CH = N-R][TCNQ]² salts. The electronic state of iron in these compounds was investigated by means of⁵⁷Fe Mössbauer spectroscopy.     

Square-planar coordinated polyanions of palladium, platinum, and gold stannaborate [SnB11H11]2- coordination chemistry

The tetrasubstituted polyanions of platinum, palladium, and gold [M(SnB(11)H(11))(4)](x-) (x=6, M=Pd, Pt; x=5, M=Au) have been prepared and characterized by single-crystal X-ray diffraction, elemental analysis, IR, Raman, (11)B, and (119)Sn heteronuclear NMR spectroscopy. In the case of the platinum derivative [Bu(3)MeN](6)[Pt(SnB(11)H(11))(4)] (2) (119)Sn M?ssbauer spectroscopy has been carried out. The isolated salts are stable towards moisture and air and the complexes 2 and 3 were treated with 1,3-bis(diphenylphosphino)propane (dppp) to give the respective substitution products [Bu(3)MeN](2)[(dppp)M(SnB(11)H(11))(2)] (M=Pd, Pt).     

27Al和29Si MAS-NMR对Mo/HZSM-5催化剂的研究

使用＾２９Ａｌ固体离分辨核磁技术对甲烷无氧芳构化催化剂Ｍｏ／ＨＺＳＭ－５分子筛进行了研究，发现ＨＺＳＭ－５分子筛本体中仅含有少量非骨架Ａｌ，Ｍｏ物种与分子筛骨架Ａｌ的相互作用随Ｍｏ担载量以及焙烧的温度的升高而增加，在高温焙烧下，Ｍｏ物种会使分子筛骨架严重脱铝，并且生成Ａｌ２（ＭｏＯ４）３新相，最终导致分子筛骨架塌陷，催化性能下降。