Controlled Synthesis of Ni-Doped MoS2 Hybrid Electrode for Synergistically Enhanced Water-Splitting Process

The development of high-efficiency, low-cost, and earth-abundant electrocatalysts for overall water splitting remains a challenge. In this work, Ni-modified MoS₂ hybrid catalysts are grown on carbon cloth (Ni-Mo-S@CC) through a one-step hydrothermal treatment. The optimized Ni-Mo-S@CC catalyst shows excellent hydrogen evolution reaction (HER) activity with a low overpotential of 168 mV at a current density of 10 mA cm⁻² in 1.0 m KOH, which is lower than those of Ni-Mo-S@CC (1:1), Ni-Mo-S@CC (3:1), and pure MoS₂. Significantly, the Ni-Mo-S@CC hybrid catalyst also displays outstanding oxygen evolution reaction (OER) activity with a low overpotential of 320 mV at a current density of 10 mA cm⁻², and remarkable long-term stability for 30 h at a constant current density of 10 mA cm⁻². Experimental results and theoretical analysis based on density functional theory demonstrate that the excellent electrocatalytic performance can be attributed mainly to the remarkable conductivity, abundant active sites, and synergistic effect of the Ni-doped MoS₂. This work sheds light on a unique strategy for the design of high-performance and stable electrocatalysts for water-splitting electrolyzers.     

Gallium and indium co‐doped ZnO thin films for white light emitting diodes

Ga and In co‐doped ZnO (GIZO) thin films together with ZnO, In‐doped ZnO (IZO), Ga‐doped ZnO (GZO), and IZO/GZO multilayer for comparison, were grown on corning glass and boron doped Si substrates by PLD. The photoluminescence spectra of GIZO showed a strong white light emission and the current–voltage characteristics showed relatively lower turn‐on voltage and larger forward current. The CIE coordinates for GIZO were observed to be (0.31, 0.33) with a correlated colour temperature of 6650 K, indicating a cool white light, and establishing a possibility of white light emitting diodes. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Zr掺杂对MgB2超导微观结构和超导电性的影响

将Mg粉、Zr粉和B粉按比例混合获得Mg1-xZrxB2(x=5%10%和20%),压制成型后,在流通氩气的条件下于800℃烧结2h.利用X射线衍射仪(XRD)、扫描电子显微镜(SEM)分析烧结后样品的显微结构和化学组成,采用差热分析(DTA)观察Zr掺杂对MgB2分解温度的影响,并用物性测试仪(PPMS)测试样品的超...     

DC Electrical Conductivity of the Direct Electrochemically Synthesized Polythiophene Metal Complexes

Electrochemical anodic oxidation of a metal anode in an acetone solution of 2,5-diamino-3,4-dicyanothiophene gave the polythiophene metal complexes of Co, Ni, Cu, Zn, Cd, and Sn. Chemical analyses, as well as FTIR and electronic spectral data, are presented to confirm the formulation of the isolated materials. DC electrical conductivity measurements of the polymer complexes were measured in the range 300–500 K in the annealed and 5% doped forms. The products gave electrical conductivity in the semi-conducting region that increased by heat.     

Ultrasonic-assisted synthesis of Ce doped cubic–hexagonal ZnTiO3 with highly efficient sonocatalytic activity

Ce doped ZnTiO₃ as a novel catalyst with highly efficient and stable sonocatalytic activity was synthesized via an ultrasound-assisted sol–gel method using non-ionic surfactant Pluronic F127 as structure directing agent. Synthesized samples were characterized by using various techniques, such as XRD, TEM, SEM, EDX, ​XRF, BET, DRS, and PL, and their sonocatalytic activity studied toward degradation of p-Nitrophenol as a model organic compound. The synthesized mesoporous Ce/ZnTiO₃ had mixed cubic–hexagonal phase with large surface area (118.2 m² g^–1) and narrow pore size distribution (4.9 nm). The effects of cerium concentration, calcination temperature, and calcination time on the structure and the sonocatalytic activity of Ce/ZnTiO₃ were studied in detail. XRD results were suggested that the relation between the phase structure and the catalytic activity is considerable. Significant decrease in band-gap and PL intensity was observed with increasing the cerium concentration in the ZnTiO₃. It became clear that the Ce/ZnTiO₃ (0.81 mol%) shows high sonocatalytic activity compared with pure ZnTiO₃ and other Ce/ZnTiO₃ samples as well as commercial TiO₂-P25. The possible mechanism for the enhanced sonocatalytic activity of Ce/ZnTiO₃ was discussed in details. The electrical energy consumption was also considered during sonocatalytic experiments.     

Defect Chemistry of Singly and Doubly Doped Ceria: Correlation between Ion Transport and Energetics

Earlier studies have shown a strong correlation between the enthalpy of formation, ΔH_f,ox, and the ionic conductivity, σ_i, near room temperature in doped ceria systems, which are promising solid electrolytes for intermediate‐temperature solid oxide fuel cells (IT‐SOFCs). The present work demonstrates that this correlation holds at the operating temperature of IT‐SOFCs, 600–700 °C. Solid solutions of Ce_1?xNd_xO_2?0.5x, Ce_1?xSm_xO_2?0.5x, and Ce_1?xSm_0.5xNd_0.5xO_2?0.5x are studied. The ΔH_f,ox at 702 °C is determined by considering the excess heat content between 25 and 702 °C combined with the value of ΔH_f,ox at 25 °C. Both σ_i and ΔH_f,ox show maxima at x=0.15 and 0.20 for the singly and doubly doped ceria, respectively, suggesting that the number of mobile oxygen vacancies in these solid solutions reaches a maximum near those compositions. An increase in temperature results in a shift of the maximum in both ΔH_f,ox and σ_i towards higher concentrations. This shift results from a gradual increase in dissociation of the defect associates.     

Synthesis and Properties of Self‐doped Polyaniline with Polycationic Templates via Biocatalysis

The enzyme horseradish peroxidase (HRP) was used to polymerize acid‐functionalized anilines to make self‐doped polymer in the presence of a polycationic template. Anionic templates such as sulfonated polystyrene (SPS) could not function as a suitable template for the polymerization of acid‐functionalized aniline derivatives. Several types of polyelectrolytes were used as templates to observe the structural effects and doping behavior of polyaniline/template complexes. The synthesis is straightforward and the conditions are mild in that the polymerization of conducting polyanilines may be carried out in buffered solutions as high as pH 6, with a stoichiometric amount of hydrogen peroxide and catalytic amount of enzyme. The conductivity of these enzymatically synthesized self‐doped polymers was relatively high without additional doping due to the self‐doping of the acid moieties. The conductivity did not decrease dramatically at pH 3 as is the usual case of unsubstituted HCl‐doped polyaniline and maintained good conductivity even at pH 6. The measured conductivity at pH 4～pH 6 is around 10^?4 S/cm to 10^?6 S/cm.     

The Synthesis,Characterization and DC Electrical Conductivity of Polypyrrole‐Zirconium Complex

Polypyrrole‐zirconium complex has been synthesized by reacting 2‐amino‐3,4‐dicyano‐5‐mercaptopyrrole with zirconium nitrate in absolute ethanol under reflux for 24 h. The product has been characterized by elemental analyses, FTIR spectroscopy, in addition to thermal analysis (TGA and DSC) and its solubility has been investigated. The DC electrical conductivity variation of polypyrrole‐zirconium complex has been studied in the temperature range 300–500 K after annealing for 24 h at 100°C and doping with I₂, FeCl₃ and CuCl₂ · H₂O for comparison. An attempt has been made to interpret the DC electrical conductivity behavior and thermal properties to chain length, dopant used, polymer structure and attached groups.     

Poly(3,5‐dichloroaniline) Doped with Different Sulfonic Acids

Poly(3,5‐dichloroaniline) was prepared by chemical oxidation in the presence of various sulfonic acids as doping agent, using potassium permanganate as oxidant. 1‐Naphtalene sulfonic acid, 2‐naphatalene sulphonic acid, 1,5‐naphtalene disulfonic acid, and p‐toluenesulfonic acid were the acids of choice. Infrared and UV‐Vis spectroscopy, utilized to characterize the polymers, revealed that the compounds exist in the emeraldine (conductive) oxidation state. The level of doping, conductivity, and morphology were determined as well. The presence of a sulfonic acid produces a morphological change, from granular to microtubule structures, which is responsible for the strong increase in the conductivity of the polymer.