基于DS/AHP的供应商选择方法

供应商选择方法有很多种，在众多的方法中层次分析法以能够将定性指标定量化而被广泛应用于供应商选择决策中。考虑到供应商选择问题中包含有很多的不确定性而证据理论在处理不确定问题又有着独特的优点，因此本文采用了一种由层次分析法和证据理论结合而产生的DS／AHP决策方法，并将其应用于供应商选择决策问题中，该方法综合了层次分析法和证据理论的优点，可以更科学的进行供应商选择决策，最后通过一个例子说明这种方法在供应商选择中的应用。     

Rheooptical investigation of the crystallization of poly(ethylene terephthalate) under tensile strain

The crystallization of poly(ethylene terephthalate) under uniaxial tensile strain at different extension rates was investigated with optical polarimetry in a temperature range between the glass-transition temperature and the quiescent crystallization temperature. The evolution of the optical properties of the polymer, including the turbidity, birefringence, and dichroism, were monitored simultaneously with the mechanical parameters. To complete the semicrystalline microstructure characterization of the polymer under strain, an online wide-angle X-ray diffraction (WAXD) technique was used in separate experiments, which were performed under the same thermomechanical conditions. For real-time measurements, a high-energy synchrotron radiation source was used. The optical properties provided information about both the crystalline and amorphous phases, whereas the WAXD patterns essentially gave information about the crystalline phase. The two experimental techniques were then used in a complementary way to characterize the semicrystalline microstructure. Significant deviations from the stress-optical rule were found. This was attributed to both transient effects and the appearance of crystallites, which consisted of highly oriented molecular segments that could contribute to the optical anisotropy but not necessarily to the stress. The behavior of the optical dichroism was found to be qualitatively different from that of the birefringence. The latter monotonically increased with the strain, whereas the former first increased with the strain, passed through a maximum, and then decreased to a steady-state value. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1915–1927, 2004     

钙钛矿型复合氧化物LaNi_(1-x)Mn_xO_3晶体结构与催化性能的关系

用XRD、IR和TPR等技术研究了钙钛矿型复合氧化物的晶体结构及其反应性能.整个组成范围内,LaNi_(i-x)Mn_xO_3(0.0≤x≤1.0)体系都生成单一钙钛矿相;x=0.0,0.6≤X≤1.0时为菱形晶系,0.2≤x≤0.5为立方晶系.IR和TPR研究表明,晶体结构对B—O键合作用存在较大影响.CO微反考察表明,本体系的催化活性与晶系存在密切关系,晶体对称性越高,反应活性越低.说明钙钛矿型复合氧化物的催化活性与体系活性中心的B—O键合作用能力有关.     

Normalization and Fermi–Coulomb and Coulomb hole sum rules for approximate wave functions

For approximate wave functions, we prove the theorem that there is a one‐to‐one correspondence between the constraints of normalization and of the Fermi–Coulomb and Coulomb hole charge sum rules at each electron position. This correspondence is surprising in light of the fact that normalization depends on the probability of finding an electron at some position. In contrast, the Fermi–Coulomb hole sum rule depends on the probability of two electrons staying apart because of correlations due to the Pauli exclusion principle and Coulomb repulsion, while the Coulomb hole sum rule depends on Coulomb repulsion. We demonstrate the theorem for the ground state of the He atom by the use of two different approximate wave functions that are functionals rather than functions. The first of these wave function functionals is constructed to satisfy the constraint of normalization, and the second that of the Coulomb hole sum rule for each electron position. Each is then shown to satisfy the other corresponding sum rule. The significance of the theorem for the construction of approximate “exchange‐correlation” and “correlation” energy functionals of density functional theory is also discussed. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

Comparison of the boundary theory with the contact rule of phase regions and Gupta’s method

The phase boundary theory and the contact rule of phase regions are compared, and some weaknesses of the latter are manifested. The comparison between the Gupta’s method and the boundary theory method for constructing multicomponent isobaric sections is also presented.     

Upper and lower bounds for the energy of bipartite graphs

Using Lagrange's multiplier rule, we find upper and lower bounds of the energy of a bipartite graph G, in terms of the number of vertices, edges and the spectral moment of fourth order. Moreover, the upper bound is attained in a graph G if and only if G is the graph of a symmetric balanced incomplete block design (BIBD). Also, we determine the graphs for which the lower bound is sharp.     

Sequent calculi for propositional star-free likelihood logic

We consider classical, multisuccedent intuitionistic, and intuitionistic sequent calculi for propositional likelihood logic. We prove the admissibility of structural rules and cut rule, invertibility of rules, correctness of the calculi, and completeness of the classical calculus with respect to given semantics.__________Published in Lietuvos Matematikos Rinkinys, Vol. 45, No. 1, pp. 3–21, January–March, 2005.     

非线性不适定问题一种双循环的牛顿型迭代格式

本文研究非线性算子方程F(x)=y的解,结合最速下降法,Newton-Landweber迭代格式及正则化思想,在F满足适当的条件下,构造出新的双循环迭代格式。本文对格式的收敛性进行了严格论证,并估计出迭代格式的收敛精度。     

Load-Carrying Capacity of Circular Plates Made of a Fiber-Reinforced Composite

The load-carrying capacity of circular plates made of a fiber-reinforced composite and loaded with axisymmetric transverse forces under axisymmetric boundary conditions is investigated. The plates can be freely supported or clamped along their contour. To the known yield condition used, in the plane of main bending moments, there correspond irregular hexagons, which depend on the mechanical properties of composite constituents and some characteristic geometrical parameters. It is shown that, depending on the ratio of ultimate radial and circumferential bending moments, in the plastic state, the circular plates (the central part of the clamped plates) take the form of a cone or a frustum of cone. For each of the cases, the limit load is found, which is a function of the above-mentioned mechanical parameters. The statically allowable fields of bending moments and the corresponding allowable fields of deflection rates are determined. The solutions found are exact. Special cases for the freely supported plates are analyzed, and the results obtained are presented in the form of graphs.__________Translated from Mekhanika Kompozitnykh Materialov, Vol. 41, No. 2, pp. 177–192, March–April, 2005.     

Balanced contributions for TU games with awards and applications

Calleja et al. [Calleja, P., Borm, P., Hendrickx, R., 2005. Multi-issue allocation situations. European Journal of Operational Research 164, 730–747] introduced multi-issue allocation situations with awards. In this paper, we extend the classical model of cooperative games with transferable utility to the cooperative games with transferable utility and awards. We define a run-to-the-bank rule for cooperative games with transferable utility and awards and characterise it in terms of a property of balanced contributions. We apply our main result to bankruptcy problems and multi-issue allocation situations with awards.