一种检验定性指标的有效方法

介绍了一种检验定性指标的有效方法,可用于确定产品的合格率和评价检验人员的检验水平。用该方法分析了某厂产品的一项实际指标,合格率为91 4%,还对该厂10名检验员的检验水平作了客观的评价。     

能动抛光磨盘的变形实验研究

 能动抛光磨盘实时产生不同的表面变形，在对大口径非球面光学元件进行精磨和抛光时实现与工件表面良好的大尺寸吻合，可以消除传统光学加工采用小尺寸磨头时带来的高频残余误差并提高加工效率。以加工直径1.3m左右，F/2的抛物面光学元件为例，对能动磨盘在不同离轴度时能够产生的变形进行了计算和实验。结果表明，能动磨盘能够以较高精度产生旋转对称或非对称的抛物面形状。对能动磨盘产生变形后的残余误差进行了分析。     

波束开角对多普勒测频结果的影响*

具有不同波束开角的声学多普勒测速设备未标定的测速结果存在偏差。基于水底椭圆散射模型研究了波束开角对声学多普勒测速结果的影响,对提高声学测速性能具有实际意义。水底椭圆散射模型下,足印上不同方位传播损失和散射强度存在差异,导致频谱不对称,测频结果偏小。利用不对称系数量化频谱不对称程度,若波束开角增大,方位不对称系数随之增大,测频偏差增大,推导了波束开角导致的测频偏差解析式。分析仿真和外场试验数据测频结果可知,不同多普勒频移下测频偏差和理论计算值相符,不同波束开角下实际测频偏差与理论公式计算的测频偏差均随波束开角增大而增大。     

定时截尾指数模型验前多数的确定

研究在定时有替换截尾试验下，指数模型点估计的验前参数的确定方法，讨论了验前参数的有关性质并给出了确定验前参数取值适合域的方法．最后用例子说明Ｂａｙｅｓ估计“优于”经典估计．     

粗大误差的灰色判别方法及其应用

介绍一种基于灰色系统理论的粗大误差判别方法。该方法对于数据少或分布规律不明的情况能给出准确的结果。以核磁共振稳态吸收实验中磁场强度与励磁电流的线性拟合为例,使用灰色判别方法进行粗大误差的判定和对比,说明该方法在物理实验异常值剔除中的高效性和实用性。     

Some Useful Integral Representations for Information-Theoretic Analyses

This work is an extension of our earlier article, where a well-known integral representation of the logarithmic function was explored and was accompanied with demonstrations of its usefulness in obtaining compact, easily-calculable, exact formulas for quantities that involve expectations of the logarithm of a positive random variable. Here, in the same spirit, we derive an exact integral representation (in one or two dimensions) of the moment of a nonnegative random variable, or the sum of such independent random variables, where the moment order is a general positive non-integer real (also known as fractional moments). The proposed formula is applied to a variety of examples with an information-theoretic motivation, and it is shown how it facilitates their numerical evaluations. In particular, when applied to the calculation of a moment of the sum of a large number, n, of nonnegative random variables, it is clear that integration over one or two dimensions, as suggested by our proposed integral representation, is significantly easier than the alternative of integrating over n dimensions, as needed in the direct calculation of the desired moment.     

三线摆实验中摆角偏大产生的误差及修正方法

研究了三线摆实验中摆角偏大(5°θ20°)时对测量转动惯量产生的误差和修正办法。实验发现随着摆角的增大,测得的圆盘转动惯量也会相应偏大,从而导致测量误差增大。文章通过进一步的理论分析解释了这一现象,并对测量结果进行了系统误差修正。     

Performance of a 80 W copper vapor laser with “alignment free” unstable CAT-EYE resonator and other configurations using intra-cavity apertures

Performance of a kinetically enhanced copper vapor laser (KE-CVL) with various stable/unstable “alignment free” CAT-EYE resonator configurations are presented here in this paper. The laser used in the experiment was a 45 mm bore (∼2 l discharge volume) kinetically enhanced copper vapor laser developed in our laboratory and capable of generating maximum power of ∼80 W (at ∼9.8 kHz). The efficiency of the laser was ∼1.4% and beam divergence of ∼3.5 mrad in a plane-plane standard multimode cavity. For the first time performance of unstable CAT-EYE resonator is demonstrated with a CVL/KE-CVL. On using unstable CAT-EYE resonator the divergence of the laser beam reduced to ∼0.22 mrad (∼20-fold reduction as compared to conventional plane-plane cavity), ∼40 W output power and with excellent misalignment tolerance. The laser output power was found to be within ∼5% drift/decline with misalignment angle of about 4 mrad between the mirrors. This is a significant improvement in comparison to standard conventional unstable resonator (M ∼ 50) CVL where ∼0.5 mrad divergence is achieved with power drift/decline of about 45% at ∼4 mrad misalignment angle.Off-axis unstable CAT-EYE unstable resonator was also demonstrated for the first time with further reduction in beam divergence to ∼0.13 mrad and with output power of ∼28 W. The misalignment tolerance was found to be highest in case of off-axis unstable CAT-EYE resonator with decline/drift in laser power of only ∼10% for misalignment angle as high as ∼8 mrad. Performance with intra-cavity apertures in plane-plane type CAT-EYE resonator for transverse mode control is also presented for the first time in CVLs. It is observed that the laser beam divergence reduces significantly to 1.25 mrad (a factor of 2) on using an aperture of ∼3.5 mm at the CAT-EYE reflector as compared to its normal (R = F = d) configuration without aperture. In case of stable CAT-EYE resonator the average beam divergence reduces from 8 mrad to 4 mrad (factor of 2) on using intra-cavity aperture of about 3 mm. It was also observed that high misalignment tolerance was retained on using intra-cavity apertures in almost all the CAT-EYE resonators. Use of intra-cavity mesh was also demonstrated for the first time with stable CAT-EYE resonator for improving the beam focus-ability. Average beam divergence was reduced by a factor of 2.5 (from 8 mrad to 3 mrad) on using intra-cavity mesh. These new configurations in CAT-EYE resonators in KE-CVLs are found to be effective in improving and controlling the laser beam divergence significantly with additional characteristic of high misalignment tolerance.     

Orbit determination and time synchronization for a GEO/IGSO satellite navigation constellation with regional tracking network

Aiming at regional services,the space segment of COMPASS (Phase I) satellite navigation system is a constellation of Geostationary Earth Orbit (GEO),Inclined Geostationary Earth Orbit (IGSO) and Medium Earth Orbit (MEO) satellites.Precise orbit determination (POD) for the satellites is limited by the geographic distribution of regional tracking stations.Independent time synchronization (TS) system is developed to supplement the regional tracking network,and satellite clock errors and orbit data may be obtai...