Induced electric fields and plasmonic interactions between a metallic nanotube and a thin metallic film

We have numerically simulated the induced electric fields and the plasmonic interactions of a metallic nanotube near a thin metallic film. Our study shows that the energies and intensities of the plasmon resonances depend strongly on the aspect ratio (the ratio of the inner to outer radius) of the nanotube as well as the separation between the center of the nanotube and the upper surface of the metallic film and the thickness of the film. The enhancement of the induced electric field of this system reaches ...     

a-C:N:H纳米尖端荧光产生的机理

用CH4,H2和NH3为反应气体,利用等离子体增强热丝化学气相沉积在沉积有碳膜的Si衬底上制备了a-C:N:H纳米尖端,并用扫描电子显微镜和微区Raman光谱仪对碳膜和纳米尖端进行了表征。结果表明:Raman谱中含有与碳和氮相关的峰,且纳米尖端的Raman谱比碳膜的Raman谱有很强的荧光背景。Raman谱中的峰说明沉积的碳膜和纳米尖端是a-C:N:H薄膜和a-C:N:H尖端。a-C:N:H纳米尖端的Raman谱中强荧光背景的产生表明其在激发光源照射的过程中发射了强荧光,对a-C:N:H纳米尖端产生强荧光的机理进行了探讨。     

拉曼光谱法研究纳米结构多孔ZnO微球的合成机理

利用拉曼光谱方法,对柠檬酸钠辅助水热合成纳米结构多孔ZnO微球的机理进行了研究。样品的拉曼光谱特征显示,多孔ZnO微球中存在Zn-柠檬酸配合物;分析表明反应溶液中柠檬酸钠水解产生的柠檬酸根与Zn2+结合形成Zn-柠檬酸配合物,该配合物化学吸附在Zn(OH)₂晶核的(204)和(503)晶面,使Zn(OH)₂晶核择优生长形成纳米薄片状结构;水热过程中Zn(OH)₂微晶团聚形成纳米片状结构多孔Zn(OH)₂微球并以沉淀析出。研究发现吸附在薄片表面的Zn-柠檬酸配合物提高了Zn(OH)₂微晶的热稳定性,使得Zn(OH)₂的分解温度高于200 ℃,加热到300 ℃后Zn(OH)₂完全分解获得纳米结构多孔ZnO微球。     

Microwave Doppler spectra of sea return at small incidence angles: specular point scattering contribution

It is well known that the sea return echo contains contributions from at least two scattering mechanisms. In addition to the resonant Bragg scattering, the specular point scattering plays an important role as the incidence angle becomes smaller (≤20o). Here, in combination with the Kirchhoff integral equation of scattering field and the stationary phase approximation, analytical expressions for Doppler shift and spectral bandwidth of specular point scattering, which are insensitive to the polarization state, are derived theoretically. For comparison, the simulated results related to the two-scale method (TSM) and the method of moment (MOM) are also presented. It is found that the Doppler shift and the spectral bandwidth given by TSM are insufficient at small incidence angles. However, a comparison between the analytical results and the numerical simulations by MOM in the backscatter configuration shows that our proposed formulas are valid for the specular point scattering case. In this work, the dependences of the predicted results on incidence angle, radar frequency, and wind speed are also discussed. The obtained conclusions seem promising for a better understanding of the Doppler spectra of the specular point scattering fields from time-varying sea surfaces.     

基于加权mean-shift可见光/红外双通道目标跟踪

为提高目标亮度突变时的跟踪性能,在每一帧进行目标跟踪时,首先提取可见光图像的颜色特征,红外图像的垂直投影图像和水平投影图像特征,然后利用可见光/红外各自通道的Bhattacharyya系数计算该通道的权值,并对加权mean-shift双通道跟踪方法进行了推导,提出了基于加权mean-shift可见光/红外双通道目标跟踪算法.该方法使前后两帧目标相似度大的通道取大的权值,从而达到有效利用各通道有利信息、提高跟踪性能的目的.实验表明,用本文提出的算法进行可见光/红外双通道目标跟踪时,与基于mean-shift单通道(可见光或红外)目标跟踪算法相比,可提高目标跟踪的准确度,特别是当目标进入树荫区域,引起目标亮度发生显著变化时,跟踪性能基本不受影响.     

The double M-effect induced by noble gases activated with negative ions

The M-effect (monochromatization-effect) is a powerful tool which can give high intensity monochromatic spectra with a certain wavelength depending on the type of used gas mixtures to generate plasma state. The effect consists in the emission of a single spectral line of plasmas ignited in certain gas mixtures. The main condition to obtain the M effect is the presence of an electropositive and an electronegative gas mixture. For example, in the case of Ne+H₂ monochrome radiation was obtained, the wavelength of Ne being 585.3 nm (1s²–2p⁵). In this paper we prove the general character of this effect, i.e. if the optical emission spectra reduced to nearly one line can be observed also in other gas mixture discharges, for example in the case of one electronegative gas and two electropositive gases. Different other mixtures, as Xe+Ne+H₂ and Xe+Ar+H₂ have been studied. In all these cases, the M-effect appeared without doubt.     

Temperature and density spectroscopic measurements in different laser-generated plasmas

A pulsed Nd:Yag laser, at intensities of the order of 10¹⁰ W/cm², is employed to irradiate different thick metallic targets (Ti, Fe, Ag, and Ni) placed in vacuum. The obtained non-equilibrium plasmas are investigated with various analytical techniques. An electrostatic ion energy analyzer and different ion collectors are employed to monitor in situ the ions ejected from the plasma and to determine the core plasma temperature, the ion energy distributions and the ion angular emission. An optical spectrometer is employed to analyze the plasma corona emitted light vs. wavelength and to identify the emitted characteristic lines. The optical spectroscopy permitted to evaluate the electron temperatures and densities. Results show strong temperature and density gradients occurring in the laser-generated plasma plume.     

Optical and mechanical properties of AlF3 films produced by pulse magnetron sputtering of Al targets with CF4/O2 gas

In this study, AlF₃ thin films were deposited by pulse magnetron sputtering of Al targets with different ratios of CF₄/O₂ gas and at different sputtering powers. The optical and mechanical properties of the AlF₃ thin films were analyzed. The transmittance spectra showed no obvious negative inhomogeneous refractive indices. Denser films with a low optical absorption were obtained when high sputtering powers were used (larger than 30 W). The lowest extinction coefficient (7.3 × 10⁻⁴ at 193 nm) of the films can be reached with 12 sccm O₂ flow rate and at 160W sputtering power. All of the residual stresses were compressive and their trends were consistent with the refractive indices. The lowest compressive stress (0.068 GPa) was obtained when the AlF₃ films were prepared at 160W sputtering power.     

利用近红外光谱技术预测粗皮桉木材弹性模量

采用近红外光谱分析技术,对粗皮桉木材弹性模量进行了快速预测研究.使用快速傅里叶变换(FFT)分析法和常规力学测试方法测定了粗皮桉木材无疵小试样的弹性模量,并用近红外光谱仪采集试样径切面和弦切面的近红外漫反射光谱,对原始光谱进行二阶导数预处理,并选择410～2 480 nm光谱段建立回归模型.以2/3的试样作为校正集建立弹性模量的偏最小二乘法校正模型,以1/3/的试样作为预测集对模型进行验证.结果表明,粗皮桉木材的弹性模量与近红外光谱之间有较好的相关性,纵向弹性模量和抗弯弹性模量的预测模型的相关系数分别为0.93和0.81,相对分析误差分别为2.70和1.71.利用近红外光谱分析方法可以实现对粗皮桉木材无疵小试样弹性模量的快速预测.     

紫外增强薄膜发射光谱测量中的倍波现象分析

紫外探测技术足继激光和红外探测技术之后发展起来的又一军民两用光电探测技术,在普通探测器件光敏面镀上将紫外波段的光转化为可见波段的光的变频薄膜是增强光电探测器紫外响应的主要技术.文章用"旋涂法"制备成像器件紫外增强薄膜.在对紫外增强薄膜的量子转化效率进行测量分析的实验过程中用SP1702紫外可见光栅光谱仪对薄膜的紫外变频效率进行分析,在激发光源为260和280nm时变频薄膜的发射光谱在520和560 nm附近有较明显的波峰.结合光栅光谱仪的工作原理,对该现象进行了理论分析,得出520和560 nm附近的波峰并非变频薄膜受激发发出的光波,而是光谱测量中产生的倍波现象.从分离重级光谱的角度没计了光谱分级器,以消除光谱测鼍中倍波现象的影响.