第一讲 光电子器件在光纤通信中的应用

光纤通信技术发展的阶段性飞跃总是伴随新型光电材料和功能器件的突破.文章介绍了光纤通信系统中应用到的各种光电子器件,从光纤通信的3个环节：光发送、光接受、光放大为出发点,着重阐述了半导体激光器、光调制器、光检测器、光放大器等关键器件的基本原理、工作特性以及发展现状和趋势,并在回顾传统集成光电子器件发展的同时,展望了以新一代微纳结构光电子器件为基础的光子集成技术的发展趋势.     

基于MEMS技术的多媒体空中鼠标

本文采用MEMS加速度传感技术,触控技术以及无线射频的多功能鼠标的电路设计方案,首先系统通过三轴陀螺仪和三轴加速度计的数据进行实时采集,将采集到的数据传送给STM32微控制器,用于计算鼠标的位移、角度、角速度等参数,并利用无线模块将数据发送到接收端,再通过USB协议发送到电脑端。针对现有空中无线鼠标通信距离、电池供电等问题的限制,本文采用通信距离更长的2.4GHZ无线电波,可循环充电利用的锂电池替代传统电池供电,并且利用USB设备通信,在接收端将大容量存储设备与鼠标设备整合复用,可实现二者之间的任意切换,提高了该鼠标系统适应实际应用环境的能力。     

并联交错PFC技术在磁体电源中的应用

并联交错功率因数校正(powerfactorcorrection,PFC)具有能减小输入电流纹波,减小电感磁芯尺寸,减小输出电容纹波、功率因数高等优点．针对其优点,考虑将该变换器应用到强磁场中心的超导磁体电源的备用方案中,以弥补现在运行电源体积过大的不足．本文主要介绍了并联交错PFC的工作原理,对其参数进行设计和选型,分析了控制方法,利用SiC器件,搭建了１kW 的实验样机,实验验证了方案的可行性,为下一步超导磁体电源的升级改造提供了理论和工程经验。     

Trends in microdisk laser research and linear optical modelling

Research into microdisk lasers demonstrates new achievements both in the technology and in the associated physical effects and applications. Melting and rounding of the disk edge boosts the Q-factors due to improved surface smoothness. In-plane cavity shape is widely used as a design instrument. Optimal shaping of pumped area lowers the threshold power. Photonic molecules made of several microdisks as “photonic atoms” show lasing at several closely spaced frequencies. A microdisk with a single quantum dot as an active region is considered as the most promising system for realisation of a single photon emitter necessary for quantum computing. These new effects and devices can be simulated with accurate numerical techniques, developed recently for “warm-cavity” linear modelling, that are able to bring a new vision of the physics of lasing.     

Renormalized dispersion of elementary excitations in spinor polariton condensates

We analyse the polarization of spinor polariton condensates and corresponding dispersions of elementary excitations. We have considered the effects of magnetic field induced splitting in circular polarizations and residual splitting in linear polarizations in the ground state provided by the cavity asymmetry. We show that anisotropic polariton–polariton interactions fully compensate the Zeeman splitting in circular polarizations below the critical magnetic field, thus leading to the spin-Meissner effect for the polariton condensates. We also analyzed the effect of polariton–polariton interactions on the stability of the gap in linear polarizations characteristic for anisotropic microcavities. It was shown that in realistic systems this gap increases with concentration of the particles, thus contributing to the stability of the pinning of linear polarization of photoemission in semiconductor microcavities for pump intensities above the stimulation threshold.     

Effect of solvent volume on the physical properties of undoped and fluorine doped tin oxide films deposited using a low-cost spray technique

Undoped and fluorine doped tin oxide films were deposited from starting solutions having different values of solvent volume (10-50 ml) by employing a low cost and simplified spray technique using perfume atomizer. X-ray diffraction studies showed that there was a change in the preferential orientation from (2 1 1) plane to (1 1 0) plane as the volume of the solvent was increased. The sheet resistance (R_sh) of undoped SnO₂ film was found to be minimum (13.58 KΩ/□) when the solvent volume was lesser (10 ml) and there was a sharp increase in R_sh for higher values of solvent volume. Interestingly, it was observed that while the R_sh increases sharply with the increase in solvent volume for undoped SnO₂ films, it decreases gradually in the case of fluorine doped SnO₂ films. The quantitative analysis of EDAX confirmed that the electrical resistivity of the sprayed tin oxide film was mainly governed by the number of oxygen vacancies and the interstitial incorporation of Sn atoms which in turn was governed by the impinging flux on the hot substrate. The films were found to have good optical characteristics suitable for opto-electronic devices.     

Investigation of multiwavelength clock recovery based on heterodyne beats of sideband-filtered signal

We investigate a new parallel all-optical clock recovery scheme based on heterodyne beats of an optical sideband-filtered signal. The oscillating clock signal is recovered when the filtered sideband is combined with a stable local oscillator. The filtering is performed with an optical resonator, which by nature provides possibility for multiwavelength operation. The local oscillator could be realized by a multiwavelength laser, whose emission wavelengths are injection seeded with carrier wavelengths of the input data. The output signal of such a configuration benefits from a reduced bit-pattern effect and a stable offset level. The sideband filtering is demonstrated for 23 simultaneous channels at 100 GHz DWDM grid, each hosting a data stream of 10 Gbit/s.     

大视场星敏感器标定技术研究

大视场星敏感器光学系统,由于畸变量较大,在轨标定过程中,直接采用最小二乘最优估计(LMS)或扩展卡尔曼滤波方法(EKF)无法精确求解其标定参数。在深入分析星敏感器测量误差因素的基础上,对考虑畸变和不考虑畸变两种情况的在轨标定结果进行了仿真对比;指出了标定焦距之前需先标定光学畸变的必要性,并介绍了4种可用于在轨校正光学畸变的方法;提出先标定主点偏差,再标定光学畸变参数,最后标定焦距的标定方法。仿真结果表明,可以采用像面旋转法求取主点偏差,利用高阶多项式方法求取光学畸变参数,畸变校正后,采用LMS和EKF标定算法估计焦距,标定精度达到了3.1μm和2.2μm。对100幅模拟星图处理后,星间角距统计偏差约为传统在轨标定方法的1/10～1/8。     

透镜检测中复合自动对焦技术的研究及应用

针对光学透镜参数测量系统中的对焦问题,设计了一种粗精结合的复合自动对焦方案.在粗对焦过程中,选用全局图像的方差函数作为清晰度评价函数,用均值比较的爬山法实现焦面搜索,并用三点法判断初始对焦方向.在精对焦过程中,利用基于数学形态学的条件膨胀算法和形状因子提取目标图像,并以日标图像区域内的Brenner函数作为清晰度评价函...     

Advanced research in millimeter-wave vacuum electronics

Selected basic research efforts currently sponsored by the U.S. Department of Defense (DOD) and the National Science Foundation (NSF) are reviewed. Major achievements are highlighted and remaining obstacles are discussed. Future advances are suggested. Opinions expressed are solely those of the author.