Near Field Stimulated Time of Flight Mass Surface Analyzer

This work describes a groundbreaking process that provides a direct highly localized measurement of the atomic mass on surfaces at room temperature. Employing an original system that joins a scanning tunneling microscopy (STM) device and a time of flight (TOF) mass analyzer, we could previously ionize surface atoms by the combination of an optical laser pulse and an electric pulse at the STM tip. Desorbed ions from a localized area were accelerated and detected by a TOF chamber. We will demonstrate in this paper that high localization and mass discrimination can be obtained even without the aid of an electric pulse from the tip. We reduced the angle of incidence of the laser beam to zero (laser beam parallel to the sample surface). In this condition we were able to demonstrate for the first time ionic desorption at a confinement level of the order of 5-10nm, an order of magnitude better than previous configurations.This paper was originally presented at the 11th Optical Near Field Workshop, which was held on June 28, 2002 at Tokyo Institute of Technology, Yokohama, organized by the Optical Near Field Group of the Optical Society of Japan, an affiliate of the Japan Society of Applied Physics.     

光栅衍射光谱的非线性研究

当汞灯发出的复色平行光斜入射光栅面时,发现衍射光谱位置并不随光谱的不同而线性分布。本文对测量数据进行了相应的理论分析,得出光栅光谱的非线性特征。     

Raman spectroscopic detection for liquid and solid targets using a spatial heterodyne spectrometer

Spatial heterodyne Raman spectroscopy (SHRS) is a new type of effective method for the analysis of structure and composition of liquid and solid targets with the characteristics of no moving parts, high spectral resolution, high optical throughput and large field of view. The technique is very suitable for detecting the targets from long distances or under the conditions with ambient light, which is essential for the exploration of planetary surface. In order to have a better understanding of the ability of SHRS for the detection of liquid and solid targets, a breadboard was designed, built and calibrated. Signal to noise was estimated at different integration time or laser power for carbon tetrachloride. Pure materials or materials contained in bottles were both tested. The mixture of organic liquids or inorganic solids were tested. In order to test the detection ability for natural targets, some composition‐unknown rocks and pebbles were tested. The results have shown that SHRS can meet the requirements for the detection of weak Raman signal scattered from artificial or natural targets. Standoff detection of sulfur from 5‐m or 10‐m distance without using any telescope or collimation optics was also tried to test the high optical throughput of SHRS. The potential feasibility of standoff detection has been proved. Copyright © 2015 John Wiley & Sons, Ltd.     

Tutorial review on validation of liquid chromatography–mass spectrometry methods: Part I

This is the part I of a tutorial review intending to give an overview of the state of the art of method validation in liquid chromatography mass spectrometry (LC–MS) and discuss specific issues that arise with MS (and MS/MS) detection in LC (as opposed to the “conventional” detectors). The Part I briefly introduces the principles of operation of LC–MS (emphasizing the aspects important from the validation point of view, in particular the ionization process and ionization suppression/enhancement); reviews the main validation guideline documents and discusses in detail the following performance parameters: selectivity/specificity/identity, ruggedness/robustness, limit of detection, limit of quantification, decision limit and detection capability. With every method performance characteristic its essence and terminology are addressed, the current status of treating it is reviewed and recommendations are given, how to determine it, specifically in the case of LC–MS methods.     

高效液相色谱-同位素稀释质谱法定量分析人生长激素

建立了人生长激素( hGH)纯化分析和高效液相色谱( HPLC)与同位素稀释质谱( IDMS)联用高准确度绝对定量方法。采用快速蛋白液相色谱来分离纯化hGH,以傅里叶变换离子回旋共振质谱仪( FTICR-MS)准确地测定蛋白质的分子质量。纯化的hGH经酸水解后,采用KINETEX C18色谱柱为分析柱,以水(含0.1%三氟乙酸)和乙腈为流动相,等梯度分离,流速0.2 mL/min,温度40℃,采用电喷雾正离子模式进行电离,选择多反应监测模式进行检测,内标法定量分析。结果表明,FTICR-MS所测得的分子量实测值与理论值仅相差0.31 Da,脯氨酸、缬氨酸和苯丙氨酸在液相条件下5 min内达到基线分离,在最优条件下,hGH含量测定结果为186.80 mg/g,相对标准偏差为0.52%。利用本方法参加国际比对,比对结果与参考值等效一致。本方法具有简易、实用的特点,并且准确可靠,可作为hGH纯品标准物质的定值方法,为hGH的日常检测提供参考。     

Liquid chromatography–high-resolution mass spectrometry for identifying aqueous chlordecone hydrate dechlorinated transformation products formed by reaction with zero-valent iron

Chlordecone (CLD) is a persistent toxic chlorinated pesticide which contaminates different ecosystems in French West Indies. A soil remediation process including zero-valent iron (ZVI) has produced promising results but failed to completely degrade CLD, and the analytical procedures used yielded little information on the transformation products. To fill these gaps, dechlorination of aqueous CLD by micrometric particles of ZVI has been investigated. Aliquots of water with 25% (v/v) of acetone spiked with 100 ppm CLD were taken at different times during a 30-day ZVI treatment and directly analysed by ultra-high-performance liquid chromatography in negative electrospray ionisation mode. CLD has been totally transformed after 14 days into 14 dechlorinated degradation products, including 9 isomeric compounds. The maximum chloride concentrations appearing in the medium represent 44% of that which would result from total dechlorination of CLD. The CLD transformation products identified by accurate mass measurements on an ultra-high-resolution Q-TOF mass spectrometer (Q-TOF-MS) were C₁₀H₃Cl₉O₂, C₁₀H₄Cl₈O₂, C₁₀H₅Cl₇O₂, C₁₀H₆Cl₆O₂ and C₁₀H₇Cl₅O₂. The results show the interest of LC-Q-TOF-MS for identifying transformation products of organic contaminants, and the effectiveness of micrometric ZVI particles to totally transform CLD into less chlorinated products.     

铝基火花源发射光谱仪测定MB1镁合金中锰含量

建立了用铝基体火花源原子发射光谱仪现有通道硬件测定镁合金(MB1)中锰元素含量的方法.方法线性相关系数为0.967 6,RSD为1.66%.对8个未知样品进行了测试,结果与化学分析方法所得结果一致.     

多种分子光谱快速分析黄芩中的黄芩苷含量

为考察根据不同类型光谱信息进行黄芩质量快速分析的适应性,采用高效液相色谱(HPLC)法测定了73批黄芩样品中的黄芩苷含量并作为y值,以各样品的近红外、紫外-可见光谱及包含紫外、可见及近红外的多源复合光谱信息作为x值;根据各类光谱信息分别采用偏最小二乘回归(PLSR)与K最近邻样本保形映射(KNN-KSR)方法进行样品中黄芩苷的预测,根据验证集样本真实值与预测值的均方根偏差(RMSEP)、平均相对误差(MRE)与相关系数(R)评价预测精度。结果表明,采用KNN-KSR方法根据各类光谱信息预测黄芩苷时,各项指标均优于PLSR方法的结果;其中基于近红外光谱对黄芩苷的分析结果最好,紫外-可见光谱次之,基于多源复合光谱信息对黄芩苷的预测误差最大,但其MRE仍在6%以下,可满足工业分析的精度要求。由于多源复合光谱仪具有体积小、重量轻、成本低及便携等优点,通过优化仪器波长范围及建模方法,有望改进该仪器的分析精度,使之适应更多药材现场采购的快速检测及后续产品的质量分析与监控需求。     

Experimental validation of an effective carbon number-based approach for the gas chromatography–mass spectrometry quantification of ‘compounds lacking authentic standards or surrogates’

For the quantitative analysis of ‘compounds lacking authentic standards or surrogates’ (CLASS) in environmental media, we previously introduced an effective carbon number (ECN) approach to develop an empirical equation for the prediction of their response factor (RF). In this research, a series of laboratory experiments were carried out to benchmark the reliability of an ECN approach for sorbent tube/thermal desorption/gas chromatography (GC)/mass spectrometry (MS) applications. First, the ECN values were determined using external calibration data from 25 reference volatile organic compounds (VOCs) using two MS dectectors (quadrupole (Q) and time-of-flight (TOF)). Then, a certified standard mixture of 54 VOCs was analyzed by each system as a simulated unknown sample. The analytical bias, assessed in terms of percentage difference (PD) between the certified and ECN-predicted mass values, averaged 19.2 ± 16.1% (TOF-MS) and 28.2 ± 27.6% (Q-MS). The bias using a more simplified carbon number (CN)-based prediction increased considerably, yielding 53.4 ± 53.3% (TOF-MS) and 61.7 ± 81.3% (Q-MS). However, the bias obtained using the ECN-based prediction decreased significantly to yield average PD values of 9.84 ± 7.28% (TOF-MS) and 16.8 ± 8.35% (Q-MS), if the comparison was limited to 26 (out of 54) VOCs with CN ≥ 4 (i.e., 25 aromatics and hexachlorobutadiene).     

Metabolite identification by liquid chromatography-mass spectrometry

Metabolite identification (Met ID) is important during the early stages of drug discovery and development, as the metabolic products may be pharmacologically active or toxic in nature. Liquid chromatography-mass spectrometry (LC-MS) has a towering role in metabolism research.This review discusses current approaches and recent advances in using LC-MS for Met ID. We critically assess and compare various mass spectrometers, highlighting their strengths and limitations. Citing appropriate examples, we cover recent LC and ion sources, isotopic-pattern matching, hydrogen/deuterium-exchange MS, data dependent analyses, MS^E, mass defect filter, 2D and 3D approaches for the elucidation of molecular formula, polarity switching, and background-subtraction and noise-reduction algorithms. A flow chart outlines a comprehensive strategy for Met ID, including a focus on reactive metabolites.