Phosphate-selective electrodes containing immobilised ionophores

Phosphate selective electrodes have been produced based upon rubbery membranes containing heterocylic macrocycles as sensors covalently bound to a cross-linked polystyrene-block–polybutadiene-block–polystyrene (SBS) polymer. The membranes were robust and the best HPO₄²⁻-selective membrane fabricated was composed of 7.1% (m/m) dicumyl peroxide, 28.3% (m/m) 2-nitrophenyloctylether, 9.8% (m/m) 3-(10-undecenyl)-1,5,8-triazacyclodecane-2,4-dione, 31.0% (m/m) SBS and 23.8% (m/m) PoleStar™ 200R (clay-based filler). The characteristics of this electrode were a linear Nernstian range of 3.9×10⁻³ to 1×10⁻⁶ mol dm⁻³ HPO₄²⁻ with a limit of detection of 1.0×10⁻⁶ mol dm⁻³ HPO₄²⁻, a slope of −29.7±0.9 mV per activity decade and a pH range from 6 to 8. Selectivity coefficients for phosphate against various interfering anions (chloride, sulfate and nitrate) were determined. Response times were 2 min or under, stability of response and electrode lifetime in continuous use were also very satisfactory. The response behavior of HPO₄²⁻-ISEs based upon mobile and bound ionophores was comparable and suggests that mobility of the ionophore is not necessary to obtain a working ISE and that covalent binding of ionophores can be used to produce ISEs of increased stability and robustness.     

Derivatives of condensed thieno[2,3-d]-pyrimidines. 20. Synthesis of 2-substituted 5,6-dihydro-8H-pyrano[4′,3′:4,5]thieno[2,3-d]pyrimidin-4(3H)-ones and 5,6,7,8-tetrahydrobenzo-[b]thieno[2,3-d]pyrimidin-4-ones

We have developed a method for obtaining 2-substituted 3-amino-6,6-dimethyl-5,6-dihydro-8H-pyrano[4′,3′:4,5]-and 5,6,7,8-tetrahydrobenzo[b]thieno[2,3-d]pyrimidin-4(3H)-ones, converted by deamination to the corresponding dihydropyranothieno-3H-pyrimidinones. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 3, pp. 441–444, March, 2006.     

Thermocapillary Alignment of Gas Bubbles Induced by Convective Transport

The effect of a weak convective heat transfer on the thermocapillary interaction of two bubbles with an arbitrary orientation relative to an externally imposed temperature gradient is examined. Asymptotic analysis of the case of large separation distances, Z, suggests that the corrections to the bubbles' velocities are of (Pe/Z²), rather than (Pe²) previously found for an isolated bubble. Equal-sized bubbles are known to move with the same velocities, as if they were isolated, when heat conduction is the only transport mechanism. However, the convective transport results in a relative motion of the bubbles. The tendency of equal bubbles to line up in a plane perpendicular to the applied thermal gradient is shown analytically in the weakly nonlinear limit of small Pe numbers, and an interesting interaction behavior in the case of unequal bubbles is discussed.     

Fluorescence decay of tertiary aliphatic amines

The fluorescence decay of the tertiary aliphatic animes trimethylamine (TMA), triethylamine (TEA) and tri-n-propylamine (TPA) in the vapour phase excited between 260 and 215 nm has been shown to consist of a single, wavelength-dependent, component when the first excited state is uniquely excited, but two components when the first and second excited states are simultaneously excited. This dual exponentiality persists at pressures as low as 10 mTorr, and it is argued that the two-component decay does not arise from collisional vibrational relaxation.     

Simultaneous purification and reversible immobilization of d-amino acid oxidase from Trigonopsis variabilis on a hydrophobic support

Purification and reversible immobilization of d-amino acid oxidase from Trigonopsis variabilis could be simultaneously accomplished by hydrophobic interaction on Phenyl Sepharose CL-4B in the presence of 50 mM pyrophosphate buffer (pH 8.5). The presence of a high salt concentration of 2M, which is generally required for the hydrophobic interactions, was not essential for the hydrophobic immobilization. The enzyme in free as well as immobilized form was optimally active between pH 7.0 and 9.0. The immobilized preparation could be reused in a batch process for the conversion of d-amino acids to α-keto acids. When the activity of the preparation dropped below practical limits, the gel could be regenerated by water wash and recharged with fresh crude extract from yeast.     

Microanalysis of Volatile Organic Compounds (VOCs) in Water Samples – Methods and Instruments

Volatile organic compounds (VOCs), due to their toxicity and persistence in the environment, are particularly important pollutants. Some of these compounds are mutagens, teratogens or carcinogens, while others are responsible for the degradation of organoleptic parameters such as taste and odour of water. This review focuses on a number of key procedural steps in the analysis of volatile organic compounds (VOCs) in water samples. A wide spectrum of techniques for the isolation and preconcentration of the aforementioned pollutants for trace organic analysis by gas chromatography are presented and discussed. The advantages and disadvantages of these techniques are discussed and novel developments are also taken into consideration.     

Determination of rhodium in water samples using cloud point extraction (CPE) coupled with flame atomic absorption spectrometry (FAAS)

Cloud point extraction was applied as a method for preconcentration of rhodium after formation of a complex with 2-propylpiperidine-1-carbodithioate (2-PPC), and later determined by flame atomic absorption spectrometry using TritonX-114 as surfactant. Rhodium was complexed with 2-PPC in an aqueous phase and kept for 15 min in a thermostatted bath at 40 °C. Separation of the two phases was accomplished by centrifugation for 15 min at 4000 rpm. The chemical variables affecting the cloud point extraction were optimized and successfully applied to rhodium determination in various water samples. Under optimized conditions, the preconcentration system (100 mL sample) permitted an enhancement factor of 50. The detection limits obtained under optimal conditions was 0.052 ng mL⁻¹. The extraction efficiency was investigated at different rhodium concentrations (7.0–42.0 μg mL⁻¹), and good recoveries (96.42–99.14%) were obtained using this method. It has been applied to the determination of rhodium in water and was compared with reported methods in terms of Student’s ‘t’-test and variance ratio ‘f’-test.     

Spin-orbit and spin-spin couplings in He2 and He2−

The spin-orbit and the spin-spin coupling constants of the ⁴Π_g state of the He₂ ⁻ ion, of the parent a³Σ_u ⁺, and of the b³Π_g states of He₂ have been evaluated by a multireference configuration interaction method. The theoretical spin-spin splittings of the a³Σ_u ⁺ state and the R-dependent spin-spin function are found to be in excellent agreement with experiment, with deviations in the range of a few MHz. The theoretical spin-orbit constants and splittings of the b³Π_g state are larger than the experimental values by about 370 MHz. The spin-orbit coupling constant of the ⁴Π_g state of He₂ ⁻ is␣estimated to be three times smaller than in the b³Π_g state, but one of the intramultiplet off-diagonal spin-spin interactions is predicted to give a large contribution to the fine structure of the metastable ion. The theoretical fine structure constants for the He₂ ⁻ ion are expected to␣aid future spectroscopic investigations of the fine structure splittings of the negative ion. Received: 14 April 1998 / Accepted: 27 July 1998 / Published online: 19 October 1998     

Using a process-centered approach to minimize the effort of compliance

 The complexity of different quality standards can, in principle, be covered by different approaches and strategies. In-depth process mapping of quality control (QC) work streams was used by the analytical laboratories of Lonza AG to show up the principle differences in being compliant to different quality systems. The results identified two main drivers for all necessary actions: process-related activities and infrastructure-related activities. In addition, a clear indication of the economic impact of these driving forces was gained, which led the laboratories to decide on a process-oriented approach. This approach has the advantage of being able to reflect the different demands of different quality assurance (QA) regulations within the same QC organizational structure. Following the process helps avoid unnecessary efforts in analytical work and represents a very economical approach, at the same time, providing high flexibility to react to different QA or customer demands. Received: 5 July 2002 Accepted: 12 November 2002 Acknowledgements The process-oriented approach resulted from many, very challenging discussions for which I would like to thank the staff of my organization (Analytics & QC), especially, the QA staff and the LIMS team. Presented at Analytica Conference, 23–26 April 2002, Munich, Germany Correspondence to B. Ciommer     

Glucose utilization by lysine-producing fluoroacetate-sensitive mutants ofCorynebacterium glutamicum

A fluoroacetate-sensitive mutant was isolated fromCorynebacterium glutamicum, ATCC 21513, following mutagenesis with NTG. Batch fermentations show that in terms of growth kinetics, glucose utilization, and lysine formation, there are significant differences between the mutant and the parent. The mutant’s specific growth rate (0.22/h) is lower than that for the parent (0.34/h). Also, the yield expressed as lysine/glucose consumed does not alter as a function of the glucose concentration for the mutant, and is about 0.22, whereas for the parent, this coefficient decreases with increasing glucose concentration. The maximum specific rate of lysine production for the mutant is 1.3 g/L/h that is about two-fold higher than that for the parent.