Dynamics of superionic Rb3H(SeO4)2 single crystals studied by H and Rb spin-lattice relaxation

The ¹H and ⁸⁷Rb spin-lattice relaxation and spin-spin relaxation times in superionic Rb₃H(SeO₄)₂ single crystals grown by the slow evaporation method were measured over the temperature range 160-450 K. The temperature dependencies of the ¹H T₁, T_1ρ, and T₂ are measured. In the ferroelastic phase, T₁ differs from T_1ρ, which is in turn different from T₂, although these three relaxation times converge to similar values near 410 K. This transition seems to occur at temperature which is about 40 K lower than the superionic transition temperature. The observation of liquid-like values of the ¹H T₁, T_1ρ, and T₂ in the high temperature is compatible with the phase being superionic, indicating that the destruction and reconstruction of hydrogen bonds does indeed occur at high temperature. In addition, the ⁸⁷Rb T₁ and T₂ values at high temperature were similar (on the order of milliseconds), a trend that was also observed for ¹H T₁ and T₂. This behavior is expected for most hopping-type ionic conductors, and could be attributed to interactions between the mobile ions and the neighboring group ions within the crystal. The motion giving rise to this liquid-like behavior is related to the superionic motion.     

Synthesis and some properties of 6-di(tri)fluoromethyl-and 5-di(tri)fluoroacetyl-3-methyl-1-phenylpyrano[2,3-<Emphasis Type="Italic">c</Emphasis>]pyrazol-4(1<Emphasis Type="Italic">H</Emphasis>)-ones

Condensation of 4-acetyl-5-hydroxy-3-methyl-1-phenylpyrazole with R^FCO₂Et (R^F = CF₂H, CF₃) in the presence of LiH affords 4-di(tri)fluoroacetoacetyl-5-hydroxy-3-methyl-1-phenylpyrazoles from which 6-di(tri)fluoromethyl-and 5-di(tri)fluoroacetyl-3-methyl-1-phenylpyrano[2,3-c]pyrazol-4(1H)-ones were synthesized. The reactions of pyrano-pyrazoles with hydrazine hydrate, ethyl mercaptoacetate, or aromatic amines proceed at the C(6) atom with pyrone ring opening and formation of aminoenones, pyrazoles, or thiophenes with the 5-hydroxy-3-methyl-1-phenyl-4-pyrazolyl fragment. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2750–2754, December, 2005.     

Photophysical studies of some dyes in aqueous solution of triton X-100

The spectral (both absorption and fluorescence) and photoelectrochemical studies of a few selective dyes, namely, anionic erythrosin B, neutral riboflavin and cationic safranin O have been carried out in aqueous solution of triton X-100, a neutral surfactant. The results show that the ionic dyes, erythrosin B and safranin O form 1:1 electron donor-acceptor (EDA) or charge-transfer (CT) complexes with triton X-100 both in the ground and excited states, whereas neutral dye riboflavin in its excited state forms 1:1 complex with triton X-100. In these complexes, the dyes act as electron acceptors whereas triton X-100 acts as an electron donor. The fluorescence spectra of erythrosin B and safranin O in presence of triton X-100 show enhancement of fluorescence intensity with red and blue shifts respectively while riboflavin shows normal quenching of fluorescence. A good correlation has been found among photovoltage generation of the systems consisting of these dyes and triton X-100, spectral shift due to complex formation and thermodynamic properties of these complexes.     

Simultaneous Determination of Dopamine and Ascorbic Acid at a Triazole Self-Assembled Monolayer-Modified Gold Electrode

A 3-amino-5-mercapto-1,2,4-triazole (TA) self-assembled monolayer-modified gold electrode (TA SAM/Au) is characterized by X-ray photoelectron spectroscopy, A.C. impedance, cyclic voltammetry, chronoamperometry and chronocoulometry. The TA SAM/Au exhibited good promotion of the electrochemical oxidation of dopamine. Some electrochemical parameters of dopamine such as electron transfer number, exchange current density, standard heterogeneous rate constant, diffusion coefficient, etc., were measured by different electrochemical methods. The peak currents of dopamine were linearly dependent on its concentration in the range of 1.5 × 10⁻⁶–1.0 × 10⁻⁴ mol L⁻¹, with a detection limit of 5.0 × 10⁻⁷ mol L⁻¹. The oxidative peak potentials of dopamine and ascorbic acid were well separated at about 190 ± 10 mV in pH 2.0 BR buffers at TA SAM/Au, the oxidation peak current increases approximately linearly with increasing concentration of both dopamine and ascorbic acid in the concentration range of 9.98 × 10⁻⁶–4.54 × 10⁻⁴ mol L⁻¹. It can be used for simultaneous determination of dopamine and ascorbic acid.     

Relative raman line intensities for H2 and for D2. Correction factors for molecular non-rigidity

Ab initio calculations are presented for H₂ and D₂ relative Raman intensities originating from common rotational levels for both vibrational-rotational and pure rotational transitions. Factors f(J) required to correct measured intensities for molecular non-rigidity (e.g. in temperature measurements) are tabulated. The calculations are compared with literature perturbation-theory equations (significant differences at large J in vibration-rotation) and with experiment.     

Laser two-photon ionization of organic molecules in dielectric liquids

The ionization threshold of fluoranthene and of TMPD in n-pentane was determined by laser two-photon ionization (TPI) and found to be 4.50 ± 0.05 and 3.88 ± 0.05 eV respectively. For both molecules the TPI spectra show distinct structure due to autoionization. For fluoranthene the TPI spectrum suggests that the molecule dissociates via the first excited singlet state.     

2,3-Dihydroxypyridine Loaded Amberlite XAD-2 (AXAD-2-DHP): Preparation, Sorption–Desorption Equilibria with Metal Ions, and Applications in Quantitative Metal Ion Enrichment from Water, Milk and Vitamin Samples

2,3-Dihydroxypyridine loaded (via –N=N–linker) Amberlite XAD-2 (AXAD-2-DHP) was prepared and characterized by elemental analyses, TGA and FT-IR spectra. It (1g packed in a column of 1cm diameter; surface area 135.5m²g^–1) was found to be an effective solid phase sorbent for enriching Zn²⁺, Mn²⁺, Ni²⁺, Pb²⁺, Cd²⁺, Cu²⁺, Fe³⁺ and Co²⁺ at pH 3.5 to 7.0 using flow rates between 1.0–5.0mLmin^–1. For desorption (recovery 97.0–99.8%) of the metal ions, 8 to 10mL of 2.0molL^–1 HCl or 1.5molL^–1 HNO₃ at a flow rate of between 2.0 and 4.0mLmin^–1 were found most suitable. The t_1/2 (time for 50% sorption) is between 2 and 10min when a 50mL solution (containing a total amount of metal of 2mg) was equilibrated with 0.5g of resin. Sorption of all metal ions except Pb²⁺ follows the Langmuir model, whereas for Pb the data fits with the Freundlich model. The sorption capacity is between 60.7 (for Cd) and 406.7 (for Cu) µmolg^–1. The resin can withstand an acid concentration of 6molL^–1 and can be reused for thirty cycles of sorption–desorption. The preconcentration factor varies between 100 and 300. For Cd, Ni and Cu the sorption capacity of 2,3-dihydroxypyridine loaded cellulose is lower than that of the present resin. The tolerance limits of electrolytes, humic acid, complexing agents, Ca²⁺ and Mg²⁺ in the enrichment of all metal ions are reported. The limits of detection are 3.88, 5.37, 8.72, 13.88, 4.71, 1.24, 0.59 and 0.30µgL^–1 for Zn²⁺, Mn²⁺, Ni²⁺, Pb²⁺, Cd²⁺, Cu²⁺, Fe³⁺ and Co²⁺, respectively. The calibration curves for flame AAS determination were linear in the ranges 0.018–1.0, 0.067–5.0, 0.2–5.0, 0.9–20, 0.028–2.0, 0.077–5.0, 0.19–10 and 0.1–3.5µgmL^–1, respectively. All the eight metal ions in river and synthetic water samples, Co in vitamin tablets and Zn in milk samples have been quantitatively enriched with Amberlite XAD-2-DHP and determined by flame atomic absorption spectrometry.     

Optimized POCl3-assisted synthesis of 2-amino-1,3,4-thiadiazole/1,3,4-oxadiazole derivatives as anti-influenza agents

Although recent decades have witnessed the synthesis of 1,3,4-thiadiazoles via phosphorus POCl₃-promoted cyclization reaction, simultaneous access to 2-amino-1,3,4-thiadiazole and 2-amino-1,3,4-oxadiazole analogs remains unexpected and elusive. Herein, a detailed regiocontrolled synthesis of 2-amino-1,3,4-thiadiazoles in good to high yields with good regioselectivities from readily available thiosemicarbazides using POCl₃ was disclosed. Meantime, to establish a comprehensive structure–activity relationship, 2-amino-1,3,4-oxadiazole derivatives as single regioisomers were prepared via EDCI·HCl-triggered cyclization of the thiosemicarbazide intermediates. The in vitro anti-influenza assays proved that the selected compounds with the pyrazine/pyridine ring exhibited certain inhibitory activities against influenza A virus strains A/HK/68 (H3N2) and A/PR/8/34 (H1N1) in MDCK cells. Among them, N-(adamantan-1-yl)-5-(5-(azepan-1-yl)pyrazin-2-yl)-1,3,4-thiadiazol-2-amine (4j) was the most active compound, and exhibited favorable activity with EC₅₀ values of 3.5 μM and 7.5 μM, respectively. In addition, the molecular docking results explained the reason why compound 4j had dual inhibitory activity and revealed the reasonable binding mode of this compound with the M2-S31N and M2-WT ion channels. This compound had the potential to be further developed as an anti-influenza drug.     

Two-electron distribution functions and intracules

 Two-electron distribution functions and intracules are functions of electronic coordinates and occupy an important, and frequently overlooked, middle ground between the beguiling simplicity of electron densities and the bewildering complexity of wavefunctions. We survey the functions that have been considered by earlier workers and introduce two new ones, the Wigner intracule and the action intracule, that have not previously been discussed. To illustrate their usefulness, we consider the intracules of jellium, a few small atoms and the dissociating hydrogen molecule. Received: 26 July 2002 / Accepted: 20 October 2002 / Published online: 30 January 2003 Correspondence to: P.M.W. Gill e-mail: peter.gill@nott.ac.uk     

Selenomethionine Extraction from Selenized Yeast: an LC-MS Study of the Acid Hydrolysis of a Synthetic Selenopeptide

A synthetically prepared seleno-peptide (AHPDVLTVXLQMLDDGR) was used as a model system for the acid hydrolysis of selenized yeast proteins. The seleno-peptide is a tryptic peptide of a heat shock protein 104 from Saccharomyces cerevisiae, was subjected to acid hydrolysis using methanesulfonic acid over a time period of 8 hours. Aliquots of the solution were sub-sampled at predetermined time intervals and the peptide fragments characterized by reversed phase LC MSⁿ. Similarly, the appearance of amino acid residues in the solution was monitored. It was found that after about 8 hours the synthetic peptide completely hydrolyzed. The use of a selenopeptide as a model for hydrolysis of selenized yeast hydrolysis was validated by comparing the decomposition time profile of the synthetic peptide with that of a selenized yeast sample. The rate of hydrolysis was identical in both systems, suggesting that the employed acid hydrolysis yields to the complete decomposition of the Se containing proteins in yeast and consequently to the liberation of selenomethionine.