Behavior of Humic Acid as a Micellar Phase in Micellar Electrokinetic Chromatography (MEKC)

The possibility of humic acids acting as micellar phase in micellar electrokinetic chromatography was evaluated. We investigated the separation of naphthalene in capillary electrophoresis using various samples of humic acids as micellar phase under different pH conditions, concentrations of humic acid, and temperature. The humic acid samples studied were from different origins including peat, vermicompost and a commercial sample acquired from Aldrich. Methanol was used as a marker for the electroosmotic flow. The results indicate that the formation of micelle depends on the number and nature of the hydrophobic association sites in an aqueous humic acid solution and on the origin and concentration of the humic acid at a defined pH. At lower pH values, the possibility of the humic acid molecule forming pseudomicelles increases due to a combination of neutralized and dissociated charged sites.     

Reaktionen mit phosphororganischen Verbindungen, 48. Mitt.

Reaction of the vicinal diols of steroids1, 5, 7, 10, 13, and16 with TPP/DEAD yields both regio-and stereospecifically the oxosteroids2, 6, 8, 11, 14, and15 by displacement of an axial hydrogen and extrusion ofTPPO besides the cholest-4-en-6-ols9 and12 and the cyclic carbonate3. 16, 17-androstandiol16 gives only the cyclic carbonate17. The different structures of the carbohydrates withcis-diol arrangement19 and21 lead exclusively to cyclic carbonates20 and22 in moderate yields. Treatment of1 with TPP/DEAD/HN₃ affords 3-azido-2-hydroxycholestane4 in addition to the above mentioned2.

     

Effect of ionic additives on the elution of sodium aryl sulfonates in supercritical fluid chromatography

Addition of a small amount of polar solvent (i.e., modifier) to CO2 in packed column supercritical fluid chromatography (SFC) has shown major improvements in both polar analyte solubility and interaction of the polar analyte with the stationary phase. Recently, the addition of an ionic component (i.e., additive) to the primary modifier by one of us has been shown to extend even further the application of SFC to polar analytes. In this work, the effect of various ionic additives on the elution of ionic compounds, such as sodium 4-dodecylbenzene sulfonate and sodium 4-octylbenene sulfonate, has been studied. The additives were lithium acetate, ammonium acetate, tetramethylammonium acetate, tetrabutylammonium acetate, and ammonium chloride dissolved in methanol. Three stationary phases with different degrees of deactivation were considered: conventional cyanopropyl, deltabond cyanopropyl, and bare silica. The effect of additive concentration and additive functionality on analyte retention was investigated. Sodium 4-dodecylbenzene sulfonate was successfully eluted using all the additives with good peak shape under isocratic/isobaric/isothermal conditions. Different additives, however, yielded different retention times and in some cases different peak shapes.     

MH—Ni电池封口化成及其性能

在硼氢化钾碱性溶液中对金属氢化物（ＭＨ）电极的表面进行化学还原处理，提高了ＭＨ电极的放电容量、活化性能和电催化活性．用其为负极组装的ＡＡ型ＭＨ－Ｎｉ电池进行了封口化成，电池放电容量达到１１５０ｍＡｈ，５Ｃ下电池的放电容量达到０．２Ｃ下容量的８０％以上，电池在１Ｃ１００％ＤＯＤ（放电深度）充放电条件下，循环寿命由原来的１００次左右提高到２００次以上     

Solid-solute phase equilibria in aqueous solution. VI. Solubilities,complex formation,and ion-interaction parameters for the system Na+−Mg2+−ClO 4 − −CO2−H2O at 25°C

The stoichiometric solubility constant of eitelite (NaMg _0.5 CO ₃ +2H⁺ ⇄ Na⁺+0.5Mg ²⁺ +CO ₂ (g)+H ₂ O, log^*K _pso ^I =14.67±0.03 was determined at I=3 m (mol kg⁻¹) (NaClO ₄ ) and 25°C. The stability of magnesium (hydrogen-)carbonato complexes in this ionic medium was explicitely taken into account. Consequently, trace activity coefficients of free ionic species, calculated from the Pitzer model with ion-interaction parameters from the literature, were sufficient for an evaluation of the thermodynamic solubility constants and Gibbs energies of formation for eitelite (−1039.88±0.60), magnesite (−1033.60±0.40), hydromagnesite (−1174.30±0.50), nesquehonite (−1724.67±0.40), and brucite (−835.90±0.80 kJ-mol ⁻¹ ). The increasing solubilities of nesquehonite and eitelite at higher sodium carbonate molalities were explained by invoking a magnesium dicarbonato complex (Mg²⁺+2CO ₃ ²⁻ ⇄ Mg(CO₃) ₂ ²⁻ , log β_z = 3.90 ± 0.08). A set of ion-interaction parameters was obtained from solubility and dissociation constants for carbonic acid in 1 to 3.5 m NaClO ₄ media which reproduce these constants to 0.02 units in log K. The following Pitzer parameters are consistent with the previously studied formation of magnesium (hydrogen-)carbonato complexes in 3m NaClO ₄ . The model and Gibbs functions of solid phases derived here reproduce original solubility data (−log [H⁺], [Mg ²⁺ ] _tot ) measured in perchlorate medium within experimental uncertainty. Presented at the XXII International Conference on Solution Chemistry, July 14–19, 1991, Linz, Austria.     

Effect of arrangement of the styryl fragment on the optical properties and complexation of mono-and bis(styryl)-substituted <Emphasis Type="Italic">N</Emphasis>-methylpyridinium perchlorates containing benzo-15-crown-5 ether moieties

Using ¹H NMR spectroscopy and steady-state and time-resolved electronic spectroscopy, the optical properties of mono-and bis(styryl)pyridinium perchlorates and their complexes with Mg²⁺, Ba²⁺ cations were studied. The stability constants of the complexes were determined using spectrophotometric titration. The formation of inclusion complexes for Mg²⁺ and sandwich type complexes for Ba²⁺ results in fluorescence enhancement and increases the lifetimes of the excited states of the initial bis-styryl ligands. The variation of position of the styryl fragment in the pyridinium aromatic ring gives rise to photochromic crown ethers with different optical and photophysical characteristics and is also an easy route to bis(crown-ethers) of symmetrical and unsymmetrical structure. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2092–2100, November, 2007.     

钯催化下有机锡化合物的偶联反应在碳-碳键形成过程中的应用

本文述评了最近几年来钯催化的有机锡化合物与有机亲电试剂的交叉偶联反应在有机合成中用于碳-碳键形成的主要研究成果。主要讨论了直接交叉偶联反应,CO或烯键插入的交叉偶联反应和机理。     

Phase-transfer catalytic activity of soluble polystyrenes containing crown ether moieties and hydroxyl groups adjacent to the macrorings

Soluble polystyrenes with crown ether structures and hydroxyl groups adjacent to the macrorings were prepared by the reaction of epoxide-containing polystyrenes with monoaza-15-crown-5 or monoaza-18-crown-6. Rate of formation of the polymer-bound alkali cation-crown alkoxide ion pair from the soluble polystyrenes and aqueous NaOH or KOH depended on the loading of crown ether and hydroxyl units and on the size of the macroring. The elimination of HCl from less reactive 2-chloroethylbenzene with aqueous NaOH or KOH in the presence of the soluble polystyrene catalysts under two-phase conditions was limited mainly by the intrinsic reaction rate. The elimination of HBr from more reactive 2-bromoethylbenzene in the presence of the less (11%) ring-substituted polymer catalyst with 18-crown unit was limited by the alkoxide formation rate. © 1994 John Wiley & Sons, Inc.     

Dispersion polymerization of methyl methacrylate: Mechanism of particle formation

The mechanism for the formation of micron-size polymer particles in the dispersion polymerization of methyl methacrylate was investigated by applying dynamic light scattering to monitor the evolution of the average particle size in the early stages of the polymerization. In addition, the contributions of physically adsorbed stabilizer and graft copolymer were evaluated by measuring the bound, unbound (adsorbed), and free stabilizer, and by determining the amount of added stabilizer required in seeded dispersion polymerizations. Twenty nanometer particles (termed nuclei) were the smallest particles detected and are considered to be formed by aggregation of growing polymer chains precipitating from solution as they exceed their critical chain length. Aggregation of these nuclei with themselves and their aggregates continues until mature and stable particles are formed. This occurs when sufficient stabilizer occupies the particle surface which includes both the polymeric stabilizer [poly(vinylpyrrolidone)] and its graft copolymer which is created in situ. The effects of process variables are discussed based on this mechanistic picture of the dispersion polymerization process. © 1994 John Wiley & Sons, Inc.     

Micelle formation of ethoxylated nonyl-phenols in aqueous solutions

The micelle formation of nonyl-phenols with various numbers of ethoxy groups (n _EO=10–40) was investigated in aqueous solutions and the study was focussed on the effect of temperature (293–323 K), the chain length and the inorganic electrolyte (NaCl) on the critical micelle concentration (c.m.c).The c.m.c. was determined by surface tension and interfacial tension measurements in a water/n-octane system. On the basis of the actual c.m.c. and its temperature dependence the thermodynamic functions of micelle formation (H° _m,S°_m,G°_m) were also calculated. The latter study comprised the determination of the thermodynamic function for unity ethoxy groups ((Y° _m)) as a function ofn _EO.According to the experimental results the micellar solutions are the more stable, the smaller the number of ethoxy groups in the tenside molecule and the higher the temperature as well as the electrolyte content of the system.