The comparison of ZnO nanowire detectors working under two wavelengths of ultraviolet

Schottky-barrier ultraviolet (UV) detectors based on ZnO-nanowires (NWs) were fabricated with Pt as electrodes in this investigation. The ZnO NWs synthesized by the hydrothermal method were characterized by field-emission scanning electron microscopy (FE-SEM), Raman and PL spectroscopy. Photoelectric properties under 254 and 365 nm UV light were investigated. It is found that the photo-response properties of the devices under 365 nm UV light are better than those under 254 nm UV light, which is further illustrated by light transmission theory, energy-band diagram and absorption spectra. The results demonstrate that ZnO NWs detectors with selectivity to near-UV (NUV) light are promising candidates in photoelectric devices.     

聚变反应历程测量系统研制及应用

为了测量惯性约束聚变实验中的聚变反应时间过程,研制了一套时间分辨优于40 ps的聚变反应历程测量系统.该系统由闪烁体及鼻锥部分、光学系统和条纹相机系统三部分组成.其中闪烁体将中子信号转换为可见光信号,光学系统则将闪烁体的发光信号成像在条纹相机上进行记录.为得到信号与入射激光的时间关系,还将时标引入了条纹相机进行记录.在...     

Determination of the time resolution for neutron scintillation detectors by multi-coincidence measurement

Based on the multi-coincidence measurement, the time resolution of three liquid scintillation detectors (BC501A) were determined strictly by solving the coincidence equations, where the influence from electronics estimated by self coincidence measurement as well as the background had been considered. The result of this work agreed well with the result that was deduced from the traditional method, and it will be helpful to analyze the energy resolution of neutron time of flight spectra measured by using such detectors at CIAE (China Institute of Atomic Energy).     

Alpha particle absorption and inclined incidence track parameters evaluation in plastic detectors

In this work the use of our recently constructed irradiation chamber was involved in the current experiments. The absorption of alpha particle in air has been studied through a set of experiments in which the stopping power has been measured. A comparison between the calculated values and the present experimental results is given and a good agreement has been found. Critical angle (θ_c) determination has been carried out using two different techniques, via indirect and direct measurements, under different etching conditions and at various alpha energies. An empirical fit of θ_c−h (h is the removal thickness layer) dependence has been calculated and found to work well in the studied h ranges. Also, the inclined alpha tracks parameters of energies between 1.0 and 5.0 MeV have been studied. Results can be successfully applicable in alpha autoradiography studies and detector efficiency determination for track registration in plastic recorders.     

Ageing of AgCl/Cd nuclear track detectors monitored by luminescence spectroscopy

Abstract

Solid-state nuclear track detectors, made of Cd doped AgCl crystals, are commonly prepared by rolling into the form of thin foils. Subsequent long-term relaxation is however needed to obtain good quality tracks. The present communication shows for the first time that this detector “ageing” is reflected in lowtemperature (77 K) luminescence spectra. Maximum of the emission band shows a slow (lasting for ～ 100 hours) blue shift, the magnitude of which (as much as 25 nm) depends on the compression ratio caused by the rolling. The shift is believed to be due to the rearrangement of Cd⁺⁺ ions around freshly introduced dislocations. This finding opens the possibility of monitoring non-destructively the process of detector ageing and to determine the minimum time required for saturation.     

Design and implementation of an array of micro-electrochemical detectors for two-dimensional liquid chromatography—Proof of principle

Simultaneous two-dimensional liquid chromatography (2D-LC) is an implementation of two-dimensional liquid chromatography which has the potential to provide very fast, yet highly efficient separations. It is based on the use of time × space and space × space separation systems. The basic principle of this instrument has been validated long ago by the success of two-dimensional thin layer chromatography. The construction of a pressurized wide and flat column (100 mm × 100 mm × 1 mm) operated under an inlet pressure of up to 50 bar was described previously. However, to become a modern analytical method, simultaneous 2D-LC requires the development of detectors suitable for the monitoring of the composition of the eluent of this pressurized planar, wide column. An array of five equidistant micro-electrochemical sensors was built for this purpose and tested. Each sensor is a three-electrode system, with the working electrode being a 25 μm polished platinum micro-electrode. The auxiliary electrode is a thin platinum wire and the reference electrode an Ag/AgCl (3 M sat. KCl) electrode. In this first implementation, proof of principle is demonstrated, but the final instrument will require a much larger array.     

Use of phosphate glass detectors for study of curium-242 cluster radioactivity

The effect α particle fluences (3 × 10³−2 × 10¹⁵ cm ⁻²) on properties of the two types of phosphate glass detectors with different compositions was studied. It was shown that the registration properties of glass detectors depended on the α particle fluence, spatial distribution of the α particle paths, and glass type. The critical α particle fluences, above which the detector properties changed, were determined.     

Particle detection properties of charge coupled devices

A detailed quantitative analysis of particle events observed in Charge Coupled Devices (CCDs) requires the knowledge of particle detection properties of the employed CCDs such as the detection threshold for energy deposition, efficiency for different kinds of radiation and the relation between the signal and the deposited energy inside the sensitive volume. For this purpose the CCD-chip was described by a simple geometrical model containing the effective thicknesses of the p-n semiconductor junctions dj and a covering dead layer d_T above them as parameters. The corresponding geometrical quantities were experimentally estimated to be 1.3 μm and 0.9 μm respectively by using different kinds of radiation.     

Monte Carlo simulation of GM probe and NaI detector efficiency for surface activity measurements

This paper deals with the direct measurement of total (fixed plus removable) surface activity in the presence of interfering radiation fields. Two methods based on Monte Carlo simulations are used: one for a Geiger–Muller (GM) ionisation probe and the other for sodium iodide (NaI) detector with lead collimators; equations for the most general case and the geometry models for Monte Carlo simulation of both (GM and NaI) detectors are employed. Finally, an example of application is discussed.     

Non-contact charge temperature measurement on industrial continuous furnaces and steel charge emissivity analysis

Continuous furnaces are commonly used for steel billet reheating before a rolling operation. It is necessary to perform a number of measurements to set-up and operate the optimization system of the furnaces correctly. A charge temperature measurement using infrared detectors can be one of the usable measurement techniques. This non-contact measurement method is based on the detection of infrared radiation emitted from a measured surface. The radiation intensity depends on the surface temperature and emissivity, which is one of the most important parameters for infrared measurements. Advantages of the non-contact temperature measurement, as well as some problems regarding the surface emissivity, are presented. The direct steel billet temperature measurement procedure using infra-red detectors, emissivity determination procedures, and example results are introduced. It is shown that steel emissivity can vary from approx. 0.17 to 0.8, depending on the surface state, scale formation, and wavelength interval. These problems are critical for the charge temperature measurement using the infra-red detectors, and are discussed in this paper.