Organic–inorganic hybrid materials. V. Dynamics and degradation of poly(methyl methacrylate) silica hybrids

Poly(methyl methacrylate)–silica hybrid materials (PMMA–SiO₂) were prepared by in situ polycondensation of alkoxysilane in the presence of trialkoxysilane‐functional PMMA. Infrared, differential scanning calorimetry, ²⁹Si and ¹³C nuclear magnetic resonance spectroscopy, and thermogravimetric analysis were used to study the PMMA–SiO₂ hybrids. The effects of the content and kind of the alkoxysilane on the dynamics and stability of the PMMA–SiO₂ hybrids were investigated in this study.The dynamics of SiO₂within hybrids were investigated with ²⁹Si–¹H cross‐polarization. The spin‐diffusion path length was on a nanometer scale estimated with the spin–lattice relaxation time in the rotating frame (T). The apparent activation energies for the degradation of the hybrids under air and nitrogen were evaluated by the van Krevelen method. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1972–1980, 2000     

Stereocontrol in the free‐radical polymerization of methacrylates with fluoroalcohols

The free‐radical polymerization of methyl methacrylate (MMA), ethyl methacrylate (EMA), isopropyl methacrylate (IPMA), and tert‐butyl methacrylate (t‐BuMA) was carried out under various conditions to achieve stereoregulation. In the MMA polymerization, syndiotactic specificity was enhanced by the use of fluoroalcohols, including (CF₃)₃COH as a solvent or an additive. The polymerization of MMA in (CF₃)₃COH at −98 °C achieved the highest syndiotacticity (rr = 93%) for the radical polymerization of methacrylates. Similar effects of fluoroalcohols enhancing syndiotactic specificity were also observed in the polymerization of EMA, whereas the effect was negligible in the IPMA polymerization. In contrast to the polymerizations of MMA and EMA, syndiotactic specificity was decreased by the use of (CF₃)₃COH in the t‐BuMA polymerization. The stereoeffects of fluoroalcohols seemed to be due to the hydrogen‐bonding interaction of the alcohols with monomers and growing species. The interaction was confirmed by NMR measurements. In addition, in the bulk polymerization of MMA at −78 °C, syndiotactic specificity and polymer yield increased even in the presence of a small amount {[(CF₃)₃COH]/[MMA]_o < 1} of (CF₃)₃COH. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4693–4703, 2000     

Dynamic behavior of ultrahigh molecular weight poly(methyl methacrylate) in semidilute solutions

The paper presents some rheological investigations on ultrahigh molecular weight (u.h.m.w.) (M_w > 10⁷) poly(methyl methacrylate) in semidilute solutions. The main interest was to study the viscoelastic behavior of the semidilute solutions at different concentrations and temperatures. In the 60‐600 rad/s frequency range, the experimental data show a predominantly elastic response (G′ > G″) for the long poly(methyl methacrylate) chains in toluene.     

脂肪酸甲酯调控鼠骨髓间质干细胞增殖作用的研究

龟板浸膏采用石油醚、乙醚、二氯甲烷依次提取,将提取物进行甲酯化处理。用MTT(商品名为噻唑蓝,化学名为3-(4,5)-2-唑噻-(2,5)-二苯基溴化四氮唑蓝)法及流式细胞仪,研究了甲酯化产物调控鼠骨髓间充质干细胞活性,采用气质联用和高效液相色谱技术研究了龟板浸膏提取物甲酯化产物的化学成分,结果表明,3个甲酯化样品都能促进干细胞增殖,而且都含有十六烷酸甲酯,当十六烷酸甲酯浓度为0.15μg/μL时能促进干细胞增殖,由此初步推断龟板浸膏甲酯化产物促进干细胞增殖与十六烷酸甲酯有关。这为中医药调控干细胞的研究提供重要的参考。     

两个锰配合物的合成、晶体结构及与DNA的作用

用常规溶液法由氯化锰(MnCl₂·4H₂O)和4-甲基-1,2,3-噻二唑-5-甲酸(HL)反应制备了配位聚合物[Mn₃(L)₆(H₂O)₄]_n(1),加入配体菲咯啉(phen)后合成了配合物[Mn₂(phen)₄(H₂O)₂Cl₂](L)₂·3H₂O (2)。用元素分析、红外光谱、热重分析及单晶X射线衍射进行了配合物的表征。单晶结构分析表明:配合物1属单斜晶系P2₁/c空间群,3个锰离子通过6个L^-中的氧原子双齿桥联,形成了线型三核簇合物单元,簇合物单元间又通过其中一个噻二唑环上的氮原子与另一个簇合物单元的锰原子配位,形成层状结构;配合物2属三斜晶系■空间群,锰离子分别与1个氯离子、1个水分子和2个phen分子中的4个氮原子配位,形成六配...     

meso－四（4－甲基－3－磺基苯）卟啉分光光度法测定痕量钯的研究

本文研究了Ｐｄ（Ⅱ）与ｍｅｓｏ－四（４－甲基－３－磺基苯）卟啉（Ｔ（４Ｍ３ＳＰ）Ｐ）的显色反应在表面活性剂十二烷基磺酸钠（ＳＤＳ）和抗坏血酸存在下，ｐＨ４８的ＨＡｃ－ＮａＡｃ介质中，沸水浴加热，Ｐｄ（Ⅱ）与Ｔ（４Ｍ３ＳＰ）Ｐ形成１∶１（Ｍ∶Ｌ）配合物配合物最大吸收波长４１４ｎｍ，表观摩尔吸光系数ε＝２０×１０５Ｌ·ｍｏｌ－１·ｃｍ－１钯量在０－２．２５μｇ／１０μＬ范围内符合比耳定律本法应用于催化剂中痕量钯的测定，结果满意     

Chemical investigation of potassium methyl siliconate as deacidification and strengthening agent for preservation of aged papers

Potassium methyl siliconate(PMS) was investigated as a simple physicochemical modification in aged paper using silane coupling technique. The PMS-based solution was shown to favor penetration in the cellulose fibers on the paper with suitable uptakes being achieved at low concentrations. The studies of the physicochemical properties of the treated paper(mechanical strength and alkalinity) demonstrated that, besides the required deacidification feature and high level of alkali reserves, the immersion treatment by PMS allowed the enhancement of the mechanical intensities of paper arising from the interaction between Si―OH generated in hydrolysis of PMS and C―OH of cellulose on the paper. Adding ethanol into PMS solution could significantly improve mechanical properties of the aged paper treated by the formula apart from modifying the flatness of the paper. Optimized treatment process was achieved by altering the ratio of ethanol to water in PMS-based solutions. Contact angle measurements indicated the occurrence of hydrophobic character of the papers in immersion treatment with PMS-based solutions. The easy availability of the materials and simplicity of the method rendered it convenient for treatment for aged paper documents.     

Catalytic Upgrading of Biomass‐Derived Methyl Ketones to Liquid Transportation Fuel Precursors by an Organocatalytic Approach

A highly efficient water‐tolerant, solid‐base catalyst for the self‐condensation of biomass‐derived methyl ketones to jet‐diesel fuel precursors was developed by grafting site‐isolated secondary amines on silica‐alumina supports. It is shown that apart from the nature and density of amine groups and the spatial separation of the acidic and basic sites, the acidity of the support material plays a critical role in defining the catalytic activity. It is also found that a combination of weakly acidic silanol/aluminol with secondary amine groups can mimic proline catalysts and are more effective in catalyzing the selective dimerization reaction than the combination of amines with organic acids. In situ FTIR measurements demonstrate that acidic groups activate methyl ketones through their carbonyl groups leading to a favorable C? C bond formation step involving an enamine intermediate. DFT analysis of the reaction pathway confirms that C? C bond formation is the rate‐limiting step.     

锌镍铝水滑石微球的制备及吸附性能

以Zn(NO_3)_2·6H_2O、Ni(NO_3)_2·6H_2O、Al(NO_3)_3·9H_2O和尿素为原料,采用一步水热法制备分散性良好的三元锌镍铝水滑石(ZnNiAl-LDHs)微球。通过X射线衍射(XRD)、傅里叶转换红外光谱(FTIR)、场发射扫描电镜(FESEM)、透射电镜(TEM)和氮气吸附-脱附等测试手段对样品的结构和形貌进行表征,并比较ZnNiAl-LDHs和ZnAl-LDHs对甲基橙(MO)的吸附性能。结果表明,ZnNiAl-LDHs是由纳米片组成、具有3D结构的微球,粒径为1~2.5μm,比表面积为156m2·g~(-1),远大于ZnAl-LDHs的比表面积38m2·g~(-1);ZnNiAl-LDHs和ZnAl-LDHs对甲基橙的饱和吸附量分别为329.60和143.47mg·g~(-1),ZnNiAl-LDHs表现出更强的吸附能力,其吸附等温线和吸附动力学分别符合Langmuir等温线模型和准二级动力学模型。     

NaOH含量对HZSM-5分子筛性质及其催化甲缩醛气相羰基化性能的影响

通过调变合成过程中NaOH的含量,制备了一系列HZSM-5分子筛,并对其催化甲缩醛(DMM)气相羰基化合成甲氧基乙酸甲脂(MMAc)反应性能进行了详细考察。结果表明,本合成体系中,NaOH含量为0.8%(质量分数)时,ZSM-5分子筛表现出最佳的催化活性。BET、~(27)Al NMR、NH_3-TPD、Py-FTIR等多种表征结果证实NaOH含量的改变可有效调变分子筛孔道中介孔孔容及中强Br?nsted酸(B酸)位点的分布,两者是影响分子筛催化活性的主要因素。中强B酸位点增加,原料DMM反应加剧,转化率提高;介孔孔容增大,产物扩散途径缩短,孔道限域效应减弱,副反应被抑制, MMAc选择性增加。进一步采用密度泛函理论对DMM与HZSM-5分子筛作用过程进行了初步探索,发现反应过程中将首先形成甲氧基甲基(ZOCH_2OCH_3)中间物种,在此基础上,提出了DMM羰基化生成MMAc的可能机制。