Poly(N-phenyl-2-hydroxytrimethylene amine): Its blends with poly(ϵ-caprolactone) and water-soluble polyethers

A new polymer with pendant hydroxyl groups, namely, poly(N-phenyl-2-hydroxytrime-thylene amine) (PHA), was synthesized by a direct condensation polymerization of aniline and epichlorohydrin in an alkaline medium. The new polymer is amorphous with a glass transition temperature (T_g) of 70°C. Blends of PHA with poly(ϵ-caprolactone) (PCL), as well as with two water-soluble polyethers, poly(ethylene oxide) (PEO) and poly(vinyl methyl ether) (PVME), were prepared by casting from a common solvent. It was found that all the three blends were miscible and showed a single, composition dependent glass transition temperature (T_g). FTIR studies revealed that PHA can form hydrogen bonds with PCL, PEO, and PVME, which are driving forces for the miscibility of the blends. © 1997 John Wiley & Sons, Inc.     

The effect of solvent on the homo-propagation rate coefficients of styrene and methyl methacrylate

The free radical propagation rate coefficients of both Methyl Methacrylate (MMA) and Styrene (STY) have been measured using Pulsed-Laser Polymerization. The effect of solvents on the propagation rate coefficient, k_p, is reported for several solvents, namely, bromobenzene, chlorobenzene, dimethyl sulphoxide, diethyl malonate, diethyl phthalate, benzonitrile, and benzyl alcohol, at 26.5°C. This preliminary data indicated that benzyl alcohol (BzA) had a large effect on the MMA propagation reaction. As earlier work indicated that N-methyl pyrrolidinone (NMP) would also have a large effect on the k_p of MMA, Arrhenius parameters were evaluated for both MMA and STY at two different concentrations of monomer in BzA and NMP. BzA had a significant effect (at 95% confidence) increasing both the activation energy (E_a) and the preexponential factor (A) for MMA and STY. In NMP, a similar trend is observed for MMA polymerization; however, while a solvent effect on STY was observed, the effect on E_a and A was too small to discern with confidence. A series of additional experiments was performed to evaluate the influence of camphorsulfonic acid (CSA) as an additive in STY polymerization. There was no effect of CSA on k_p, confirming that the strong effect CSA has on “living” radical polymerization of styrene does not originate from complexation leading to an accelerated propagation step but rather by altering the ratio of active-to-dormant chains in the reaction. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2311–2321, 1997     

Continuity of solvent quality in polymer solutions. Poor-solvent to Θ-solvent continuity in some polystyrene solutions

Critical temperatures for polystyrene/methyl acetate (PS/MA) and polystyrene/ethyl formate (PS/EF) solutions were measured at positive (PS/MA, PS/EF) and negative (PS/MA) pressure. The results confirm that solvent quality is sensitive to pressure; some solvents, designated Θ, at P_nominal ∼ 0, undergo a Θ-to-poor transition at negative pressure, and others, nominally designated “poor,” show a poor-to-Θ transition at positive pressure. Thus, any dichotomous division into sets of “poor” and “Θ” solvents is inaccurate, unless it accounts for the effects of pressure and other variables on solvent quality. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35 : 1251–1259, 1997     

Mass spectroscopy and SEC of SRM 1487, a low molecular weight poly(methyl methacrylate) standard

Matrix Assisted Laser Desorption Ionization (MALDI) Time of Flight (TOF) Mass Spectrometry (MS) was used to study the molecular weight distribution (MWD) and the number of α-methyl styrene (α-MeSty) repeat units in SRM 1487, a narrow MWD poly(methyl methacrylate) (PMMA) standard reference material of about 6300 g/mol, which was initiated with α-MeSty. It was found that each PMMA polymer chain had from zero to seven α-MeStys per chain. The MWD of the polymer chains containing a fixed number of α-MeStys was obtained. The MWD, M_w, and the average number of α-MeSty at a given molecular weight from MALDI TOF MS compare well with those obtained from more traditional methods such as ultracentrifugation and Size Exclusion Chromatography (SEC). The implications of the number of α-MeStys per chain is discussed in terms of the chemistry of anionic polymerization. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35 : 2409–2419, 1997     

鼓泡浆态反应器中低温甲醇合成的探索

为了开发低温液相甲醇合成新工艺,使用CuCr／CH3ONa催化体系,在直径40mm的鼓泡浆液反应器中考察了低温甲醇合成的反应性能。鼓泡浆液反应器使用的浆液由铜铬催化剂、甲醇钠溶液、乳化剂OP-10和液相介质二甲苯组成。实验结果表明在90℃～110℃、4．8MPa和操作气速0．2cm／s下,前9h的CO平均转化率达到78％。甲醇是反应的主要产物。与搅拌釜中的实验结果比较,鼓泡浆液反应器的反应效率为搅拌釜的80％。这是由于甲醇钠的消耗和乳化剂的负效应所致。实验结果示范了鼓泡浆态反应器中低温甲醇合成的可行性。     

Near-monodisperse,n-alkyl,end-functionalized poly(methyl vinyl ether)s: Synthesis by living cationic polymerization and solution characterization

Water-soluble amphiphilic diblock copolymers were synthesized by the living cationic polymerization of methyl vinyl ether (hydrophilic block) and its subsequent termination with n-alcohols of chain lengths varying from one to eight, and three n-alkyl carboxylic acids with 10, 12, and 18 carbon atoms. Additionally, water and ethylene glycol were tested as terminating agents. The extent of the functionalization was determined using ¹H NMR spectroscopy. The cloud points of 1% w/w aqueous solutions of the polymers as determined by turbidimetry decreased from 32 to 21°C as the number of carbon atoms of the terminating agent increased. Aqueous GPC revealed micellization of the stearic acid-terminated block copolymer, while the other block copolymers existed mainly as unimers. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2547–2554, 1998     

Temperature and molecular weight dependence of interfacial tension between immiscible polymer pairs by the square gradient theory combined with the Flory–Orwoll–Vrij equation-of-state theory

Interfacial tension between immiscible polymer pairs was predicted by using a square gradient theory in conjunction with the Flory–Orwoll–Vrij equation-of-state expression for the free energy of mixing. The contact interaction parameter was determined by fitting the equation-of-state theory to experimental cloud points taken from the literature, and the square gradient coefficient was estimated from the relation derived from a scattering function. The modified square gradient theory could successfully predict both the magnitude and temperature dependence of interfacial tension between polystyrene and poly(methyl methacrylate), although no adjustable parameters were used in calculating interfacial tension. The molecular weight dependence of interfacial tension was also successfully predicted. The contribution of free volume on interfacial tension is analyzed for two systems: polystyrene/poly(methyl methacrylate) and polystyrene/poly(dimethyl siloxane) blends. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 2683–2689, 1998     

Chemical reactions occurring in the thermal treatment of PC/PMMA blends

The chemical reactions occurring in the thermal treatment of bisphenol-A polycarbonate (PC) and poly(methyl methacrylate) (PMMA) blends have been investigated by nuclear magnetic resonance (NMR), mass spectrometry (MS), size exclusion chromatography (SEC), and thermogravimetry (TG). Our results suggest that in the melt-mixing of PC/PMMA blends, at 230°C, no exchange reactions occur and that only the depolymerization reaction of PMMA has been observed. In the presence of an ester-exchange catalyst (SnOBu₂), an exchange reaction was found to occur at 230°C, but no trace of PC/PMMA graft copolymer has been observed. Instead, an exchange reaction between the monomer methyl methacrylate (MMA), generated in the unzipping of PMMA chains, and the carbonate groups of PC has been suggested. This is due to the diffusion of MMA at the interface or even into the PC domains, where it can react with PC producing low molar mass PC oligomers bearing methacrylate and methyl carbonate chain ends and leaving the undecomposed PMMA chains unaffected. The TG curves of PC/PMMA blends prepared by mechanical mixing and by casting from THF show two separated degradation steps corresponding to that of homopolymers. This behavior is different from that of a transparent film of PC/PMMA blend, obtained by solvent casting from DCB/CHCl₃, which shows a single degradation step indicating that the degradation rate of PC is increased by the presence of PMMA in the blend. The thermal degradation products obtained by DPMS of this blend consist of methyl methacrylate (MMA), cyclic carbonates arising from the degradation of PMMA and PC, respectively, and a series of open chain bisphenol-A carbonate oligomers with methacrylate and methyl carbonate terminal groups. The presence of the latter compounds suggests a thermally activated exchange reaction occurring above 300°C between MMA and PC. The presence of bisphenol-A carbonate oligomers bearing methyl ether end groups, generated by a thermally activated decarboxylation of the methyl carbonate end groups of PC, has also been observed among the pyrolysis products. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1873–1884, 1998     

Surface modification of coir fibers I: studies on graft copolymerization of methyl methacrylate on to chemically modified coir fibers

Graft copolymerization of methyl methacrylate (MMA) onto chemically modified coir fiber was studied using a CuSO₄–KIO₄ combination as initiator in an aqueous medium in the temperature range of 50–70 °C. Concentrations or [IO₄−] = 0.005 mol/l and [Cu2+] = 0.002 mol/l produce optimum grafting. The effects of time, temperature, amount of coir fiber, some inorganic salts and organic solvents on graft yield have also been investigated. On the basis of experimental findings, a reaction mechanism has been proposed. Evidence of grafting was studied from fourier transform infrared spectroscopy and scanning electron microscopy of chemically modified coir and MMA‐grafted coir. Tensile properties such as maximum stress at break, extension at break and Young's modulus of untreated, defatted, chemically treated and grafted coir fibers were evaluated and compared. Grafted coir fiber showed an increase in tensile properties such as maximum stress at break, extension at break and Young's modulus. Copyright © 1999 John Wiley & Sons, Ltd.