聚甲基丙烯酸甲酯浇铸成膜的银纹形态与其成膜浓度的关系

聚甲基丙烯酸甲酯浇铸成膜的银纹形态与其成膜浓度的关系叶卫珺，沈静姝（中国科学院化学研究所高物开放实验室北京１０００８０）关键词银纹，缠结密度，均匀形变区，聚甲基丙烯酸甲酯非晶态聚合物在拉伸应力作用下，会在材料表面或内部产生能反射光线的微小而稠密的裂痕...     

钕掺杂提高TiO2光催化活性的机制

采用X射线衍射(XRD), BET吸附, X射线光电子能谱(XPS)表征了溶胶凝胶法制备的Nd掺杂TiO2光催化剂的晶体结构、表面电子结构与化学组成. 以甲基橙为有机底物, 测试Nd掺杂对光催化剂吸附性能和光催化活性的影响. 结果表明, Nd掺杂可阻碍TiO2的晶相转变, 减小光催化剂的晶粒尺寸, 比表面积增大. Nd掺杂提高光催化剂表面三价钛(TiⅢ)的含量及其对甲基橙的吸附能力是其提高TiO2光催化降解甲基橙活性的主要原因. Nd掺杂量为1.2%时, 光催化剂活性最高.     

A spectrophotometric determination of the formation constants of the inclusion complexes ofα- andβ-cyclodextrins with the azonium and ammonium tautomers of methyl orange and methyl yellow

The color fading caused by the addition of-cyclodextrin or-cyclodextrin to an aqueous solution of a tautomeric mixture of methyl orange or methyl yellow is studied spectrophotometrically at pH 1.1 and 25.0°C. A model involving 1 : 1 stoichiometry has been used to analyze the spectrophotometric data. The addition of a cyclodextrin shifts the tautomeric mixture towards the side of the ammonium tautomer. An expression allowing the calculation of the tautomeric equilibrium constant of the inclusion complexes is derived. The formation constants of the inclusion complexes of the individual tautomers are determined. Both- and-cyclodextrins bind the ammonium tautomer stronger than the azonium tautomer. The inclusion complexes of-cyclodextrin are more stable than the corresponding ones of-cyclodextrin.     

三维全息原子场作用矢量用于HEPT类抗艾滋病药物的QSAR研究

采用本实验室新近提出的三维全息原子场作用矢量表征34个1-[(2-羟乙氧)甲基]-6-苯硫基胸腺嘧啶(HEPT)类抗艾滋病药物结构并与其活性建立定量构效关系模型. 采用逐步回归对变量进行筛选后, 运用多元线性回归(multiple linear regression, MLR)建模的复相关系数(R2cum)、交互校验的复相关系数(Q2cum)和模型的标准偏差(SD)分别为R2cum=0.928、Q2cum=0.883与SD=0.43, 均优于Hancsh报道的值(R2cum=0.911、Q2cum=0.863与SD=0.45). 模型具有良好的稳定性和预测能力, 表明三维全息原子场作用矢量能较好表征该类分子结构信息, 值得进一步推广应用.     

Separation of conjugated linoleic acid methyl esters by silver-ion high performance liquid chromatography in semi-preparative mode

Silver-ion HPLC (Ag-HPLC) has been utilized to separate a variety of unsaturated fatty acid methyl esters (FAMEs) by configuration, location or number of olefinic or acetylenic bonds. Two analytical Ag-HPLC columns connected in series and an isocratic solvent system of acetonitrile (ACN) in hexane were used to fractionate 10-15 mg samples of a mixture of two deuterium-labeled isomers of conjugated linoleic acid (Z9.E11- and Z9,Z11-octadecadienoic acid-17,17,18,18-d4). "Baseline" (> 95%) resolution of the two isomers, which decreased with increasing weights of sample injected, was maintained by careful adjustment of the percentage of ACN in the ACN/hexane solvent system. Chemical purities of the isolated FAME were > 96%.     

Trimethylsulfonium hydroxide as derivatization reagent for the chemical investigation of drying oils in works of art by gas chromatography

A procedure for the determination of fatty acids (FA) and glycerol in oils has been developed. The method includes a derivatization step of the FAs into their methyl esters or a transesterification of the triacylglycerols with trimethylsulfonium hydroxide (TMSH), respectively. The analysis is carried out by gas chromatography with parallel flame ionization and mass spectrometric detection. The parameters involved in the transesterification reaction were optimized. Only the stoichiometric ratio of TMSH:total FA amount showed a significant influence on the reaction yield. Relative standard deviations for 10 replicates were below 3% for all FAs studied and their linearity range was 0.5-50 mmol/L, when using heptadecanoic acid as an internal standard. The final procedure was rapid and required little sample handling. It was then tested on fresh oil samples and presented satisfying results, in agreement with previous works.     

Über die Darstellung der Dimercapto(methyl)sulfonium-Salze[CH3S(SH)2]+AsF−6 und [CH3S(SH)2]+SbCl−6 und der Bis(chlorthio)Methylsulfonium-Salze [CH3S(SCI)2]+ AsF6−und [CH3S(SCL)2]+SbCl−6

On the Preparation of Dimercapto(methyl)Sulfonium Salts [CH₃S(SH)₂]⁺ AsF₆^? and [CH₃S(SH)₂]⁺SbCl₆^? and the Bis(chlorothio)methylsulfonium Salts [CH₃S(SCI)₂]⁺ AsF₆^? and [CH₃S(SCI)₂]⁺ SbCl₆^? The preparation of the dimercapto(methyl)sulfonium salts [CH₃S(SH)₂]⁺ AsF₆^? and [CH₃S(SH)₂]⁺SbCl₆^? from [CH₃SCl₂]⁺ salts and H₂S at 195 K is reported. The salts are stable below 210 K. They are characterized by additional Raman spektroscopic measurements of the isotopic labelled cations [CH₃S(SD)₂]⁺, [CH₃S(³⁴SH)₂]⁺ and [CH₃S(₃₄SD)₂]⁺. The dimercapto(methyl)sulfonium salts are transfered into bis(chlorthio)methylsulfonium salts by reaction with Cl₂ at 195 K.     

Determination of experimental excess molar properties for MTBE+1-propanol+octane

Summary Experimental excess molar enthalpies and densities have been measured for the ternary mixture x₁MTBE+x₂1-propanol+(1-x₁-x₂)octane and the involved binary mixtures at 298.15 K and atmospheric pressure. In addition, excess molar volumes were determined from the densities of the pure liquids and mixtures. A standard Calvet microcalorimeter was employed to determine the excess molar enthalpies. Densities were measured using a DMA 4500 Anton Paar densimeter. The UNIFAC group contribution model (in the versions of Larsen et al., and Gmehling et al.) has been used to estimate excess enthalpies values. Experimental data were also used to test several empirical expressions for estimating ternary properties from experimental binary results.     

Synthesis and properties of poly(aryl ether ether ketone) copolymers with pendant methyl groups

Polyether ether ketone and polyether ether ketone copolymers were prepared by the nucleophilic substitution reaction of 4,4′-difluorobenzophenone with hydroquinone and with varying mole proportions of hydroquinone and methyl hydroquinone using sulfolane solvent in the presence of anhydrous K₂CO₃. The polymers were characterised by different physico-chemical techniques. The crystallinity of the polymers was found to decrease with increase in concentration of the methyl hydroquinone units in the polymer. Thermogravimetric studies showed that all the polymers were stable upto 430 °C with a char yield above 49% at 900 °C in N₂ atmosphere. The glass transition temperature was found to increase and the crystalline melting temperature and activation energy were found to decrease with increase in concentration of the methyl hydroquinone units in the polymer.     

Specific features of the interaction of methyl ethers of methyl (methyl-α-D-galactopyranoside)uronate with trimethylsilyl ions in the gas phase

Specific features of the interaction between trimethylsilyl ions and methyl (methyl-α-d-galactopyranoside)uronate and its methyl ethers were revealed. It was shown that a hydrogen atom is generated when the trimethylsilyl ion is located at hydroxyl group. This atom migrates over the methoxy and hydroxyl groups toward the glycoside methoxy group, resulting in the formation of [Me+SiMe₃−MeOH]⁺ ions. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1317–1319, July, 1997.