硝酸甲酯分子间相互作用的DFT和ab initio比较

用密度泛函理论(DFT)和从头算(ab initio)方法,分别在B3LYP/6 31G和HF/6 31G水平上求得硝酸甲酯三种二聚体的全优化几何构型和电子结构,并用6 311G和6 311＋＋G基组进行总能量计算.对HF/6 31G计算结果进行MP4SDTQ电子相关校正.在各基组下均进行基组叠加误差(BSSE)和零点能(ZPE)校正求得结合能.对6 31G优化构型作振动分析并基于统计热力学求得200～600 K温度下单体和二聚体的热力学性质.详细比较两种方法的相应计算结果,发现DFT求得的分子间距离较短,分子内键长较长,所得结合能均小于相应ab initio计算值.     

可交联聚甲基丙烯酸甲酯的合成、表征及在阵列式波导光栅中的应用

合成了含环氧基团的可交联的甲基丙烯酸甲酯和甲基丙烯酸环氧丙酯的共聚物[Poly(MMA-co-GMA)],通过FTIR,NMR,GPC,DSC和AFM等技术对其进行了表征. 结果表明,所合成的聚合物材料具有较好的成膜性; 通过热固化使引入的环氧基团开环交联,该聚合物的玻璃化转变温度(Tg)比固化前提高了24 K,同时有效地降低了聚合物的双折射率. 用Poly(MMA-co-GMA)作为包层材料,双酚A型环氧化合物作为高折射率材料, 将其引入到包层材料中形成芯层材料的折射率在波长1.55 μm处可调,其范围是1.483~1.588. 采用旋涂、 铝掩膜和氧反应离子刻蚀的方法(RIE)制得了阵列式光波导. 测试结果表明,制作的波导在1.55 μm处实现了光的单模传输,光损小于3.0 dB/cm.      

Study on the Tautomer Interconversion of 3-Oxo Pentanoate During Gas Chromatography

Enol and keto tautomers of methyl 3-oxo pentanoate could be separated on a HP-5 capillary column. The chromatographic peaks were identified by examining characteristic mass ions arose from the corresponding enol and keto molecular ions. The study showed that the area percentage of enol tautomer is a function of temperature of the column. Treating the column as a reactor, the energy of activation for the on-column tautomerization could be extracted (35.1 kJ mol⁻¹) by monitoring the loss of the enol tautomer, because the reaction is found to obey pseudo first-order kinetics. The enthalpy and the entropy changes (ΔH = −3.98 kJ mol⁻¹, ΔS = −7.89 J K⁻¹mol⁻¹) for the enol-to-keto reaction in the stationary phase were also obtained.     

Degradation-fragmentation of marine plastic waste and their environmental implications: A critical review

This review critically evaluates the plastic accumulation challenges and their environmental (primarily) and human (secondarily) impacts. It also emphasizes on their degradation and fragmentation phenomena under marine conditions. In addition, it takes into account the leachability of the various chemical substances (additives) embedded in plastic products to improve their polymeric properties and extend their life. Regardless of their effectiveness in enhancing the polymeric function of plastic products, these additives can potentially contaminate air, soil, food, and water. Several findings have shown that, regardless of their types and sizes, plastics can be degraded and/or fragmented under marine conditions. Therefore, the estimation of fragmentation and degradation rates via a reliable developed model is required to better understand the marine environmental status. The main parameter, which is responsible for initiating the fragmentation of plastics, is sunlight/UV radiation. Yet, UV- radiation alone is not enough to fragment some plastic polymer types under marine conditions, additional factors are needed such as mechanical abrasion. It should be also mentioned that most current studies on plastic degradation and fragmentation centered on the primary stages of degradation. Thus, further studies are needed to better understand these phenomena and to identify their fate and environmental effects.     

BARRIER PROPERTIES OF VINYLIDENE CHLORIDE/METHYL ACRYLATE COPOLYMER

A series of vinylidene dichloride (VDC) copolymers with methyl acrylate (MA) ascomonomer (3--12wt%), was prepared by free-radical suspension copolymerization. Thepermeability coefficients of the copolymers to oxygen and carbon dioxide were measured at1.0 MPa and at 30℃, and those to water vapor were measured at 30℃ and 100% relativehumidity All the VDC/MA copolymers studied are semicrystalline. As the MA contentincreases, the permeability coefficients of the copolymers to oxygen, carbon dioxide, andwater vapor are progressively increased, caused by decrease in crystalline fraction andincrease in free volume of VDC/MA copolymers.     

甲基化的β-环糊精与十六烷基三甲基溴化胺的相互作用

环糊精与表面活性剂的相互作用已有许多研究,但多局限于β－环糊精（β－CD）,而修饰的β－环糊精与表面活性剂的相互作用研究较少[1－3]．分子内扭转电荷转移（TICT）激发态对介质极性高度敏感性,已成功地用于探针环糊精与表面活性剂的相互作用[4]．研究表明,β－CD能够诱     

Voltammetric Determination of Trace Amounts of 2‐Methyl‐4,6‐Dinitrophenol at a Silver Solid Amalgam Electrode

The voltammetric behavior of 2‐methyl‐4,6‐dinitrophenol was investigated by differential pulse voltammetry (DPV) at a nontoxic mercury meniscus‐modified silver solid amalgam electrode (m‐AgSAE). Conditions have been found for its determination by DPV at m‐AgSAE in the concentration range of 0.2 to 1 μmol L^?1.     

Identification of cis/trans isomers of methyl ester and oxazoline derivatives of unsaturated fatty acids using GC–FTIR–MS

Identification of cis/trans isomers of unsaturated fatty acids cannot usually be achieved by GC-MS (gas chromatography-mass spectrometry) without reference substances. In this study a GC-FTIR-MS system (gas chromatography-Fourier transform-mass spectrometry) was used to identify fatty acid methyl esters (FAMEs) and differentiate between the cis/trans isomers. Besides methyl esters, 2-alkenyl-4,4-dimethyloxazoline derivatives (DMOX), which have been used to locate double bond positions of unsaturated fatty acids, were examined with respect to their suitability for cis/trans differentiation. A combined GC-FTIR-MS system with a wide band (4000–550 cm^?1) mercury cadmium telluride (MCT) detector was used in series and parallel to identify 31 reference unsaturated fatty acids, including 7 pairs of cis/trans isomers. Serum samples of healthy persons and commercially available fish oil were analyzed as examples of complex mixtures. Using splitless injection the detection limit for the less sensitive IR detector was 25 ng/μl in case of the weak cis and trans bands. In the FTIR spectra cis/trans isomers were identified by analysis of bands arising from C? H out-of-plane (oop) bending: for both the FAME and DMOX derivatives cis-1,2-disubstituted double bonds give a strong band near 720 cm^?1 and the corresponding trans isomers near 967 cm^?1. cis Isomers could be identified further by a band at 3012 cm^?1. With the combined data of the GC-FTIR-MS system it is now possible to identify polyunsaturated fatty acids with regard to the discrimination of cis/trans isomers.     

A new route for the functionalisation of wood through transesterification reactions

A novel transesterification reaction between acetylated maritime pine sapwood (Pinus pinaster Soland) and methyl benzoate (MB), in the presence of dibutyltin oxide (DBTO) as a catalyst, was performed. Reaction was confirmed by Fourier-transform infrared spectroscopy (FTIR) and ¹³C nuclear magnetic resonance cross-polarisation with magic-angle spinning (NMR CP MAS) analysis: signals corresponding to benzoylated wood were identified and, when transesterification was performed with ethyl trimethylsilylacetate (ETMSA), characteristic trimethylsilyl groups were detected. The acetyl/benzoyl exchange rate was found to increase with increasing amount of DBTO, temperature and reaction time and a concurrent deterioration of the woody material was evidenced.     

Analysis of sorption and bioavailability of different species of mercury on model soil components using XAS techniques and sensor bacteria

The present work studies the adsorption behaviour of mercury species on different soil components (montmorillonite, kaolinite and humic acid) spiked with CH₃HgCl and CH₃HgOH at different pH values, by using XAS techniques and bacterial mercury sensors in order to evaluate the availability of methyl mercury on soil components. The study details and discusses different aspects of the adsorption process, including sample preparation (with analysis of adsorbed methyl mercury by ICP-OES), the various adsorption conditions, and the characterization of spiked samples by XAS techniques performed at two synchrotron facilities (ESRF in Grenoble, France and HASYLAB in Hamburg, Germany), as well as bioavailability studies using mercury-specific sensor bacteria. Results show that XAS is a valuable qualitative technique that can be used to identify the bonding character of the Hg in mercury environment. The amount of methyl in mercury adsorbed to montmorillonite was pH-dependent while for all soil components studied, the bond character was not affected by pH. On the other hand, clays exhibited more ionic bonding character than humic acids did with methyl mercury. This interaction has a higher covalent character and so it is more stable for CH₃HgOH than for CH₃HgCl, due to the higher reactivity of the hydroxyl group arising from the possible formation of hydrogen bonds.The bioavailability of methyl mercury adsorbed to montmorillonite, kaolinite and humic acids was measured using recombinant luminescent sensor bacterium Escherichia coli MC1061 (pmerBR_BSluc). In case of contact exposure (suspension assays), the results showed that the bioavailability was higher than it was for exposure to particle-free extracts prepared from these suspensions. The highest bioavailability of methyl mercury was found in suspensions of montmorillonite (about 50% of the total amount), while the bioavailabilities of kaolinite and humic acids were five times lower (about 10%). The behaviour of methyl mercury in the presence of montmorillonite could be explained by the more ionic bonding character of this system, in contrast to the more covalent bonding character observed for humic acids. Thus, XAS techniques seem to provide promising tools for investigating the mechanisms behind the observed bioavailabilities of metals in various environmental matrices, an important topic in environmental toxicology.