Synthesis and Characterization of Novel Organosoluble Methyl Substituted Poly(aryl Ether Ketone)s Containing Sulfone Linkage

Several new methyl substituted poly(aryl ether ketone)s containing sulfone linkage with inherent viscosities of 0.62–0.84 dL/g have been prepared from 4,4′‐bis(2‐methylphenoxy)diphenylsulfone and 4,4′‐bis(3‐methylphenoxy)diphenylsulfone with terephthaloyl chloride and isophthaloyl chloride by electrophilic Friedel‐Crafts acylation in the presence of DMF with anhydrous AlCl₃ as a catalyst in 1,2‐dichloroethane, respectively. These polymers having weight‐average molecular weight in the range of 71,000–49,000 are all amorphous and show high glass transition temperatures ranging from 167 °C to 191 °C, excellent thermal stability at temperatures over 400 °C in air or nitrogen, high char yields of 51–58% in nitrogen and good solubility in CHCl₃ and polar solvents such as DMF, DMSO and NMP at room temperature.     

PHOTOSENSITIVITY OF Ce (Ⅳ) INITIATED METHYL ACRYLATE POLYMERIZATION

The influences of UV light irradiation (313 nm) and diffused daylight on the polymerization of methyl acrylate initiated by the ceric ammonium nitrate without any reducing agent have been studied both in aqueous nitric acid and in pure water. The rate of polymerization was found to be accelerated and the overall activation energy and the induction time were found to be decreased sharply by the UV light irradiation. Under UV light, the rate of polymerization is 8 times as high as the rate in dark. The rate of polymerization was found to attain a maximum with the increase of nitric acid concentration and the rate of polymerization became less sensitive to UV light in the presence of nitric acid whereas the induction period reduced outstandingly. Based on the experimental results, the mechanism is proposed.     

引发甲基丙烯酸甲酯聚合的聚丙烯酰胺－氯化铜配合物膜催化剂表征

考察甲基丙烯酸甲酯在室温Ｎａ２ＳＯ３水溶液的聚合能力，发现在该溶液添加聚丙烯酰胺（ＰＡＡｍ）－氯化铜（ＣｕＣｌ２）配合物膜以组成ＰＡＡｍ－ＣｕＣｌ２膜／Ｎａ２ＳＯ３催化引发体系是必不可少的．采用ＥＳＲ、ＩＲ、ＸＰＳ和电导率等手段研究该体系催化剂的表面结构．结果表明，膜的单位面积平均含铜量在一定范围内和配位体种类等对催化活性有显著影响，即催化性能与催化剂的表面结构紧密相关．     

Methyl abstraction kinetics of CpFe(CO)2Me using the benzyl radical clock

The rate constant for the methyl abstraction reaction of CpFe(CO)₂Me has been measured with the benzyl radical clock as (1.1 ± 0.2) × 10⁵ M⁻¹ s⁻¹ at room temperature. Time-resolved Fourier-transform Infrared (FTIR) absorption spectroscopy pointed towards the formation of the CpFe(CO)₂ radical upon benzyl abstraction. The main stable product has been established by a linear scan of the reaction mixture as Cp₂Fe₂(CO)₄ produced by the dimerization of the CpFe(CO)₂ radicals. The transition state structure for the abstraction process was also found at UB3LYP/6-311+G* level of theory to contain a planar CH₃ group.     

Facile oxidative conversion of alcohols to esters using molecular iodine

A simple, efficient, and high-yield procedure for the oxidative conversion of alcohols to various types of esters and ketones, with molecular iodine and potassium carbonate was successfully carried out.     

Microemulsion photopolymerization of methacrylates stabilized with sodium dodecyl sulfate and poly(N-acetylethylenimine) macromonomers

Methyl methacrylate and butyl methacrylate were polymerized in oil-in-water microemulsions that were stabilized by sodium dodecyl sulphate (SDS). A poly(N-acetylethylenimine) (PNAEI) macromer was also included in the recipe, as a cosurfactant and a comonomer. Polymerizations were initiated by UV-irradiation. The average diameters of latex particles, obtained by STM, were in the range of 17-200 nm. The experimental data evidenced that the particle size was mainly dependent on the SDS/PNAEI ratio. Polymerization yields were around 75-85%. The synthesized copolymers have viscosity average molecular weights in the range of 2.1-2.4×10⁶ and glass transition temperatures of 38.0-43.5°C, lower than those obtained without using PNAEI. The investigation by means of FTIR and 1H-NMR techniques revealed that PNAEI was incorporated into the nanoparticles.     

A simple and efficient biphasic method for the preparation of 4-nitrophenyl N-methyl- and N-alkylcarbamates

Treatment of 4-nitrophenyl chloroformate with alkylammonium hydrochloride salts and solid anhydrous Na₂CO₃ in either CH₂Cl₂ or CH₃CN gave 4-nitrophenyl N-methylcarbamate and other N-alkylcarbamate analogues in excellent yields. Of particular interest is the observation that 4-nitrophenyl N-methylcarbamate, a safer alternative to the highly toxic methyl isocyanate, is obtained in quantitative yield (?95% pure as determined by ¹H NMR) after simple filtration and solvent evaporation.     

The Constituents of Cynanchum Taiwanianum

The isolation and identification of eleven crystalline components from the aerial part of Cynanchum taiwanianum Yamazaki (Asclepiadaceae) are described. Their structures were determined on the basis of spectral evidence and chemical transformation. Besides caffeic acid, β-amyrin, and methyl phaeophorbide a, the isolated flavonoid components are classified into two groups, i.e. kaempferol derivatives (kaempferol, astragalin, afzelin, trifolin) and quercetin derivatives (quercetin, isoquercitrin, quercitrin, hyperin).     

(Liquid + liquid) equilibria of (water + propionic acid + methyl isoamyl ketone or diisobutyl ketone or ethyl isoamyl keton) at T = 298.2 K

(Liquid + liquid) equilibrium (LLE) data for (water + propionic acid + solvent) were measured at T = 298.2 K and atmospheric pressure. The solvents were methyl isoamyl ketone (5-methyl-2-hexanone), ethyl isoamyl ketone (5-methyl-3-heptanone) and diisobutyl ketone. The tie-line data were correlated by means of the NRTL and UNIQUAC equation, and compared with results predicted by the UNIFAC method. A comparison of the extracting capabilities of the solvents was made with respect to distribution coefficients, separation factors, and solvent free selectivity bases.     

Polymerization of methyl methacrylate in the presence of iron(II) complex with tetradentate nitrogen ligands under conditions of atom transfer radical polymerization

Four tetradentate nitrogen ligands, viz. dichloro{[N,N^′-diphenyl-N,N^′-di(quinoline-2-methyl)]-1,2-ethylene diamine} (1), {[N,N^′-dioctyl-N,N^′-di(quinoline-2-methyl)]-1,2-ethylene diamine} (2), {[N,N^′-dibenzyl-N,N^′-di(quinoline-2-methyl)]-1,2-ethylene diamine} (3), and (1R,2R)-(−)-N,N^′-di(quinoline-2-methyl) di-iminocyclohexane (4), were investigated as novel complexing ligands in iron-mediated atom transfer radical polymerization (ATRP) of methyl methacrylate where ethyl-2-bromoisobutyrate was the initiator in o-xylene at 90 °C. With ligands 1 and 2 the experimental molecular weights increased gradually with monomer conversion. High to moderate conversions (87%, 43%) were obtained in relatively short times (90 min for 1 and 30 min for 2), which indicates an efficient catalyst system, but after these times a dramatic increase in viscosity of the polymerization medium led to loss of control. It is noteworthy that polymerization proceeded in a controlled manner with ligand 1, which has two rather bulky substituents on the N-atom. Such bulky ligands did not work for a copper-based system, where they led to excessive terminations or other side reactions. When the bulkiness of the substituents was significantly increased, as in ligand 3, a decrease in polymerization rate and loss of control occurred. Ligand 4 was less efficient than the other ligands, probably because the ethylene bridge was replaced by cyclohexane bridge.