氯吡格雷抵抗机制的研究进展及临床处理策略

冠心病患者尽管接受了标准的氯吡格雷治疗,但仍有一部分患者对氯吡咯雷表现为低反应甚至无反应,称为氯吡格雷抵抗。导致这种抵抗现象的可能原因包括患者个体的基因多态性和药物之间的相互作用等。临床处理的主要对策有提高氯吡格雷的给药剂量和采用新型药物等。笔者就现有的临床研究证据对氯吡格雷抵抗的定义、发生机制及临床干预策略进行了综述。     

基于MOS-NDR负阻器件的D触发器设计

负阻器件由于在电流 电压特性曲线中表现出独特的负微分电阻特性,从而大大增加了单个器件所能实现的逻辑功能.如果将其用于数字逻辑电路设计,尤其是触发器的设计,可有效减少器件的数目.通过分析CMOS工艺负阻器件MOS-NDR及单双稳态转换逻辑单元MOBILE的工作特性,设计了一个时钟上升沿触发的D触发器.采用TSMC 0.18 μm工艺对所设计的电路进行HSPICE仿真,仿真结果表明所设计的电路具有正确的逻辑功能.与基于MOS-NDR负阻器件的同类触发器相比,新设计的D触发器具有更稳健的输出和较强的抗干扰能力     

X射线衍射光谱和X光电子能谱研究直接甲醇燃料电池阳极催化剂

利用Ｘ射线衍射光谱和Ｘ光电子能谱研究了甲醇电催化氧化的Ｐｔ－Ｍｏ／Ｃ催化剂,发现该内化剂主要以０价态的Ｐｔ和氧化态的Ｍｏ存在,分析了甲醇在该催化剂的活化机理。     

用电阻箱自组电桥的桥臂电阻选择

本文分析了用电阻箱作桥臂电阻自组电桥的灵敏度及测量结果不确定度,给出桥臂电阻的选择原则。     

电阻温度系数的微机测定系统

本文介绍一种电阻温度系数微机测定实验的系统。     

Kapitza phonon transmission from clean H-silicon(111) surfaces into liquid helium

We have studied the phonon transmission from ultraclean Si(111) surfaces into liquid helium by the phonon pulse technique. Reflection experiments and angular resolving transmission experiments were performed to measure the absolute value of the transmission coefficient and its dependence on the phonon emission angle into the solid. Clean samples etched conventionally in dilute HF show a significant anomalous transmission. An additional etch step in highly buffered HF (i.e., NH₄F) with a pH-value of 7.8 reduces the transmission coefficient drastically. Local inhomogeneities of the transmission coefficient caused by the deposition of water molecules on the surface could be visualized by the enhanced transmission. We found that the observed anomalous transmission is caused by mass defects.     

气密性碳涂覆光纤筛选强度与电阻关系研究

通过实验分析确立了把光纤电阻作为衡量气密性碳涂覆光纤通过２％应变筛选的过渡标准。要拉制２％应变筛选的碳涂覆光纤，其电阻值应小于３０ｋΩ／ｃｍ。     

微观结构对膜换湿能力影响研究

对多孔膜换湿过程进行了理论分析,得到了透湿量和湿阻的计算式.同时对三种膜包括PVDF,PES和纤维素膜进行了湿阻的测量实验,通过对实验数据的回归处理,得到了多孔膜的结构参数.结果表明,膜厚、孔径分布、孔隙率及曲折因子对膜的换湿特性都有较大影响,在平均孔径相同的情况下,其它因素仍然导致了不同膜换湿能力的较大差距。在所获得的结构参数基础上,通过数值模拟的方法研究了平均孔径对膜换湿能力的影响。结果表明湿阻随平均孔径的增大而减小,减小趋势逐渐平缓最后趋向一定值。     

Effects of the Synergy of Hardness and Resilience on the Akron Abrasion Properties of SBR Vulcanizates

The hardness (H) and resilience (R) of rubber vulcanizates were combined together in this paper, named as hardness–resilience product (H⁴R), and its relationship with the Akron abrasion loss was investigated using various styrene-butadiene rubber (SBR) vulcanizates possessing specific hardness and resilience characteristics as samples. For the unfilled SBR vulcanizates with different chain microstructure, possessing high elastic resilience and low hardness, the results showed that their Akron abrasion loss had a good linear relationship with the log(H⁴100R). This linear relationship also occurred when these SBRs were filled with 50 phr carbon black. For two particular types of SBR, after being filled with different fractions of carbon black and aged for different times, all their Akron abrasion losses (including unaged, aged for 24 h, and aged for 48 h) also had a good linear relationship with the log(H⁴100R). However, this linear relationship weakened for one of the SBRs after being aged for 48 h. In the high H⁴R region (the carbon black fractions being 60 and 70 phr), the data obviously deviated from the fitting curve due to the high hardness of the aged vulcanizates. However, after being filled with 50 phr of various kinds of carbon blacks, the relationships between abrasion loss and log(H⁴100R) were also approximately linear, with the correlation coefficient of the fitting curves being 0.99966 and 0.99878, respectively, for the two types of SBR.     

Reflection of keV heavy-ion beams from solid targets. Dependence on energy and angle of incidence

Recent experimental and theoretical studies of the reflection of keV heavy-ion beams have been extended to higher energies and to non-perpendicular incidence. The reflection coefficient for Na⁺ and K⁺ ions backscattered from polycrystalline gold and silver targets has been obtained for perpendicular incidence at energies of 100–500 keV. The dependence on angle of incidence has been investigated at 30 keV for the same combinations of targets and projectiles. Effects of electronic stopping have been included in the theoretical calculations. Good agreement between the experimental results and the theoretical calculations is found.