Surface and catalytic properties of doped tin oxide nanoparticles

Mixed oxides composed of Zn-Sn, Ti-Sn and V-Sn were prepared by a co-precipitation method and evaluated as catalysts for methanol oxidation in an ambient fixed-bed reactor. Surface analysis by X-ray photoelectron spectroscopy (XPS) revealed an electronic interaction between dopant and Sn atoms in the oxide structure and showed the formation of surface states associated with the dopants. Oxygen vacancies were present on the Zn-doped oxide, and the oxidation of methanol to carbon oxides was favored. The Ti-doped oxide exhibited a favorable selectivity to dimethyl ether, related to the oxygen anions near Ti centers. Vanadium dopants not only dramatically increased the catalytic activity but also promoted the partial oxidation of methanol to formaldehyde. Results demonstrate that the bridging dopant-O-Sn bond acts as active sites and influences product distribution.     

CH4/空气简化动力学机理数值验证

选择绕圆柱预混燃烧算例，验证CH₄/空气三种简化动力学机理（16s41r、15s19r和53s325r）.考虑均匀来流，忽略湍流和湍流与燃烧相互作用以及燃料扩散效应，假设层流有限反应速率，采用保自由流5阶WENO格式求解多组分Euler方程组，得到CH₄/空气预混燃烧流场温度等值线、沿驻点线压力和温度及其CH₄、CO和CO₂质量百分数分布.结果表明：三种简化动力学机理给出的流场均出现弓形激波和火焰面，弓形激波和火焰驻点距离及其形状、诱导区宽度和简化动力学机理相关.当圆柱直径增大，弓形激波和火焰向圆柱上游移动，对应的驻点距离均增大，诱导区宽度变短，点火延时变小，但火焰和弓形激波位置次序未变化.53s325r模型要比16s41r模型和15s19r模型精度要高，点火延时覆盖的压力和温度范围也较宽，所有简化机理均未完全反应，在较大圆柱直径下游达到化学平衡.     

煤颗粒热膨胀量与破碎特性的研究

煤颗粒的热膨胀破碎特性直接影响流化床锅炉的运行效率.本文利用热机械分析仪(TMA)测定了不同种类不同密度的型煤和原煤的热膨胀特性,并对部分破碎微观形貌进行了FSEM观察;通过旋转炉内的燃烧试验研究了热膨胀特性和破碎的关系.研究表明,煤颗粒在燃烧过程中其热膨胀破碎主要发生在挥发分析出阶段;内部挥发分的析出会使颗粒内压增大而产生膨胀,进而产生细小裂纹并破碎;挥发分越高,颗粒密度越大,其热膨胀形变率越大,越容易发生破碎现象;主要挥发分析出后热膨胀引起的破碎可以忽略.     

低温太阳热与甲醇化学链整合能量释放机理实验初探

本文在低温太阳热能与CH3OH-Fe2O3化学链燃烧相结合控制CO2分离动力系统的基础上,进一步探讨了低温太阳热能品位提升的内在规律,分别揭示出辐照强度与CH3OH-Fe2O3反应特性、低温太阳热能品位提升的关联关系.本文采用溶胶凝胶法制作了Fe2O3反应颗粒,在热重反应器中进行了模拟太阳热能与甲醇化学链实验的初步研究,通过电镜,分析了反应前后金属氧化物的表面形貌特征.研究成果将为低温太阳热能与化学链燃烧整合能量释放新机理的研究提供理论依据和基础实验数据.     

La1．6（MoO4）3∶Eu3＋0．4纳米晶合成及发光特性

采用燃烧法合成了La1．6（MoO4）3∶Eu3＋0．4纳米晶末,研究了其声子-掺杂-晶格相互作用和发光性质。 X射线粉末衍射（XRD）分析表明,在500～900℃退火后,La1．6（MoO4）3∶Eu3＋0．4样品为单一晶相。对样品进行了光致发光（PL）测量,激发Mo6＋-O2－电荷迁移带,观察到Eu3＋的系列发光,表明Mo6＋-O2－带和Eu3＋间存在能量传递,中心波长分别在λ1＝469 nm和λ2＝426 nm处的两个one-phonon边带,相应的声子能量分别为767和1202 cm－1,分别对应于Mo O和Mo—O—Mo伸缩振动。同时,计算了两个局域模电子-声子耦合强度的黄昆因子分别为S1＝0.055和S2＝0.037,为揭示其三价离子高传导特性及其负热膨胀物理特性提供了实验基础。     

Investigation of self-adaptive algebraic tomography for gas reconstruction in larger temperature range by multiple wavelengths absorption spectroscopy

We develop a self-adaptive algebraic tomography algorithm （SAATA） to investigate the simultaneons reconstruction of concentration and temperature distributions in larger temperature range from two views. The simplified optical arrangement with fewer projections is realized by extension of spectral information at multiple wavelengths, resulting in great potential in applications of practical combustion diagnosis. Tile results show SAATA can perform much better reconstructions in 300 3000 K temperature range than genetic simulated annealing algorithm and least-square orthogonal-triangular decomposition method with two- wavelength scheme. More phantoms are created to demonstrate the capability of SAATA to capture the peaks and adapt for both flat and sharp temperature distributions. Meanwhile, the advantage of high stability ensures better reconstruction performance at noise levels from 0.1% to 10% in projections.     

显示用上转换绿色发光材料NaYF4∶Er,Yb及其特性

采用喷射微波燃烧合成法制备了上转换发光显示器中发绿光的上转换发光材料NaYF4∶Er,Yb.测试了该材料的XRD衍射图谱和发光效率.给出了该材料在1 064 nm三种激光功率激发下的发光光谱.分析了该材料的上转换发光机理,得到545 nm和662 nm峰值发光分别是Er3+的4S3/2→4I15/2和4F9/2→4I15/2跃迁产生的.NaYF4∶Er,Yb具有较强的上转换绿光,同时存在的较弱的红光易于用滤色膜滤除,满足显示对三基色中绿色的要求;并且喷射微波燃烧合成法制备的该材料达到了高分辨率显示应用超细粉体的要求.     

Premixed turbulent combustion modeling using tabulated detailed chemistry and PDF

Tabulated chemistry and presumed probability density function (PDF) approaches are combined to perform RANS modeling of premixed turbulent combustion. The chemistry is tabulated from premixed flamelets with three independent parameters: the equivalence ratio of the mixture, the progress of reaction, and the specific enthalpy, to account for heat losses at walls. Mean quantities are estimated from presumed PDFs. This approach is used to numerically predict a turbulent premixed flame diluted by hot burnt products at an equivalence ratio that differs from the main stream of reactants. The investigated flame, subjected to high velocity fluctuations, has a thickened-wrinkled structure. A recently proposed closure for scalar dissipation rate that includes an estimation of the coupling between flame wrinkling and micromixing is retained. Comparisons of simulations with experimental measurements of mean velocity, temperature, and reactants are performed.     

新型金属蜂窝板燃烧器的高效燃烧现象分析

新型金属蜂窝板燃烧器是通过采用双层或多层金属薄片制成,能有效地解决普通燃气灶具燃烧器存在的不足,使产品结构更加合理完善,性能更加稳定可靠,能效更加优越。本文以红外燃气灶具的核心部件—新型金属蜂窝板燃烧器为研究对象,利用红外摄像仪对红外燃气灶具和普通燃气灶具进行了对比研究。结果表明,红外燃气灶的火焰集中,温度分布均匀,燃烧效率比普通燃气灶高12.7%。     

Swiss-Roll燃烧器催化剂结构的实验研究

实验研究了装有Pt覆盖的多孔陶瓷的Swiss-Roll燃烧器的燃烧特性,分别得到了3种不同长度的催化剂基底的熄火极限,并测量3种情况下催化剂壁面及催化剂后部空间的温度。实验结果表明,3种情况中,催化剂基底长4.5mm的燃烧器可燃范围最大,所以此长度较适合此Swiss-Roll燃烧器。从温度数据可以看出来,催化剂后部空间存在反应,且受上游催化剂表面反应强度的影响。