活性碳纳米管的制备及其在有机电解液中的电容性能研究

以KOH为活化剂对碳纳米管进行化学活化制备双电层电容器用高比表面积活性碳纳米管. 采用TEM和N₂吸附法表征活性碳纳米管的结构, 采用恒流充放电、循环伏安、交流阻抗等评价其在1 mol•L^－1 Et₄NBF₄/PC中的电容性能. 随活化剂用量增大、活化温度升高和活化时间的延长, 活性碳纳米管的比表面积和比电容都呈增大的趋势. 活化剂用量为3∶1, 800 ℃活化4 h制备的活性碳纳米管的比表面积663 m²•g^－1, 比活化前提高了3倍, 其比电容达57.2 F• g^－1, 比活化前提高了2倍. 将活性碳纳米管的比电容与其比表面积相关联, 发现两者之间具有非常好的线性关系, 并分析了原因.     

金银纳米粒子的复合组装及表面增强拉曼光谱研究

采用自组装技术在硅基底上进行金银纳米粒子的混合组装, 通过控制组装溶液中金银溶胶的体积比而控制基底上金银纳米粒子的密度. SEM结果显示金银呈亚单层均匀分布, 以吡啶为探针分子, 在不同波长的激发光下研究了纯金、银以及混合组装时的SERS效应. 利用金银在不同激发线下增强效应的不同以及探针分子吸附在金银纳米粒子表面主要谱峰相对强度差别的特点, 通过一系列校正以及差谱方法研究了金银共存时SERS效应的变化, 并分离出混合体系中金的增强行为, 结果表明在金银同时组装时吡啶的SERS谱峰特征主要表现为银纳米粒子的行为, 分离出的金SERS光谱特征接近银的行为, 说明金银纳米粒子之间产生了一定的耦合作用.     

异辛醇中酶催化高效合成阿莫西林的研究

通过比较6种有机溶剂作为反应介质时对阿莫西林合成的影响,发现反应介质在保持酶的催化活性和稳定性方面发挥着非常重要的作用,确定异辛醇为酶催化合成阿莫西林的反应介质.通过研究不同温度下异辛醇中酶催化合成阿莫西林的时间曲线,确定了最佳反应温度和反应时间,通过对底物浓度和酶浓度进行响应面优化,最终得到阿莫西林合成的最优反应条件,在最优条件下可得到91.37%的最大阿莫西林产率.     

First-principles calculation of core-level binding energy shift in surface chemical processes

Combined with third generation synchrotron radiation light sources, X-ray photoelectron spectroscopy (XPS) with higher energy resolution, brilliance, enhanced surface sensitivity and photoemission cross section in real time found extensive applications in solid-gas interface chemistry. This paper reports the calculation of the core-level binding energy shifts (CLS) using the first-principles density functional theory. The interplay between the CLS calculations and XPS measurements to uncover the structures,...     

Ultrasound-assisted Extraction of Kamebakaurin from Rabdosia excisa by Response Surface Methodology

For the efficient extraction of kamebakaurin（KA）, the ultrasound-assisted extraction（UAE） of KA from Rabdosia excisa（R, excisa） via response surface methodology（RSM） was investigated with high-performance liquid chromatography（HPLC）. Effects of the experimental parameters such as extraction solvent, ratio of liquid to plant material, extraction time and extraction temperature on the extracting efficiency of KA from R. excisa were evaluated, and the purity of KA in residual was calculated. The optimized conditions were 65.5%（volume fraction） acetone, 35 ℃, time of 24.6 min with ultrasound of 80 W/L, 40 kHz, ratio of liquid to plant material at 30：1（mL/g）. The maximum yield of KA is 0.708 mg/kg, with mean purity of 6.09%, indicating that ultrasound-assisted extraction is a feasible and useful method for extracting KA from R. excisa.     

Effect of nitrogen plasma treatment on the crystallinity and self‐bonding of polyetheretherketone (PEEK) for biomedical applications

Polyetheretherketone (PEEK) is a thermoplastic material with outstanding properties and high potential for biomedical applications, including hermetic encapsulation of active implantable devices. Different biomedical grade PEEK films with initial degree of crystallinity ranging from 8% to 32% (with or without mineral filling) were inspected. PEEK surfaces were treated with nitrogen RF plasma and the effects on materials crystallinity and self‐bonding were evaluated. In particular, the relationship between auto‐adhesive properties and crystalline content of PEEK before and after plasma treatment was examined. PEEK samples showed different bonding strength depending on their degree of crystallinity, with higher self‐bonding performance of mineral‐filled semi‐crystalline films. XRD did not show any modification of the PEEK microstructure as a result of plasma treatment, excluding a significant influence of crystallinity on the self‐bonding mechanisms. Nevertheless, plasma surface treatment successfully improved the self‐bonding strength of all the PEEK films tested, with larger increase in the case of semi‐crystalline unfilled materials. This could be interpreted to the increase in chain mobility that led to interfacial interpenetration of the amorphous phase.     

Li3PO4包覆LiMn2O4正极材料的结构表征和电化学性能

采用共沉淀法在尖晶石LiMn2O4颗粒表面包覆Li3PO4.XRD、SEM研究结果表明,包覆后的材料仍为尖晶石结构,粒径均匀.电化学性能测试表明,Li3PO4包覆层的存在,减少了正极材料与电解液的直接接触,抑制了高温下电解液对LiMn2O4材料的侵蚀,从而有效改善了高温下材料的循环性能.在40℃时,包覆样品的比容量衰减率都低于未包覆样品,其中包覆1%Li3PO4的样品的初始比容量为110.4mAh/g,50次循环后比容量为84.1mAh/g.     

溴化-1-(α-辛基吡啶)-6-(α-十二烷基吡啶)己烷的合成与表征

双子表面活性剂是通过联结基将两个相同头基和相同疏水链的普通表面活性剂在头基或靠近头基处以化学键方式连接在一起,这种表面活性剂与相应的普通表面活性剂相比,具有更高的表面活性[1],已引起学术界和工业界人士的广泛兴趣和关注。分子结构不对称的双子表面活性剂,包括不同化