Electro-optical performance of polymer stabilized cholesteric texture cell: The influence of chiral dopant and monomer concentration

Reverse-mode polymer stabilized cholesteric texture (PSCT) cells with various chiral dopant and monomer concentrations were fabricated. Experimental results indicate that the chiral dopant concentration and the monomer concentration significantly influence the threshold voltage and hysteresis of the cells. The chiral dopant and monomer deform the hysteresis loop. Increasing the monomer concentration reduces the width of the hysteresis loop of the reverse-mode PSCT cell.     

Nuclear forward scattering vs. conventional Mössbauer studies of atomically tailored Eu-based materials

With the decrease in size of devices, rapid characterization of nano-devices is an inevitable necessity. It is shown that Mössbauer spectroscopy using synchrotron radiation from the advanced photon source provides such a tool of investigation. Results are presented and compared for conventional Mössbauer and Nuclear Forward Scattering for ¹⁵¹Eu-doped magnesium sulfide as an example, especially at low concentrations.     

In‐line monitoring of UV photopolymerization with a quartz crystal resonator

An in‐line monitoring device using a quartz crystal resonator for thin film polymerization was proposed, and its performance has been evaluated by implementing in the UV polymerization of 2‐hydroxyethyl methacrylate with a photoinitiator of 1‐chloroanthraquinone. Because the variation of resonant resistance of the resonator is proportional to the square root of viscosity change that is closely related to the polymerization degree, the resistance can be used as a measure of the polymerization degree. The resistance measurements were compared with the outcome of instrumental analyses of polymerization degree using an FTIR spectrometer and a gel permeation chromatograph. The experimental results showed that the resistance measurements were consistent with the experimental outcome of the instrumental analyses, and this indicates the effectiveness of the proposed device. Owing to the simplicity and availability of the resonator system, its wide utilization in the monitoring of a variety of film polymerization processes, including photoresistor application, is expected. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2428–2439, 2006     

Crystal structure and morphology of phenyl‐capped tetraaniline in the leucoemeraldine oxidation state

A series of crystals of phenyl‐capped tetraaniline in the leucoemeraldine oxidation state were obtained at different isothermal temperatures and were observed directly under transmission electron microscope. The crystals obtained at higher temperatures exhibit more perfect structures than those obtained at lower temperatures. Both the lamella thickness and the crystal size increase with crystallization temperature. The tetraaniline is apt to form larger scale crystals under lower degree of supercooling. However, their crystal structures keep steady with the crystallization temperature. The tetramer was found to adopt a monoclinic lattice with unit cell parameter of a = 13.93 Å, b = 8.82 Å, c = 23.20 Å, and β = 95.03°, as determined using electron diffraction tilting method combined with wide‐angle X‐ray diffraction experiment. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 764–769, 2006     

热效应对光折变晶体两波耦合的特性影响的理论分析

用一种模型对两波耦合进行了分析，导出了强度相位的解析式，对影响两波耦合的参数进行了理论分析。分析了对ＢａＴｉＯ３光折变晶体的两波耦合的测量结果。     

高纯金属镨中痕量稀土杂质的电感耦合等离子体原子发射光谱分析及光谱干扰的校正

本文提出了PGS-2型平面光栅光谱仪(色散率0.18纳米,二级光谱)与PlasmaTherm ICP-5000D射频发生器联用,乙醇预去溶方式进样,同时直接测定高纯金属镨中5个痕量稀土杂质元素的方法。并讨论了基体浓度对检出限的影响以及光谱干扰及其校正方法。当样品溶液中镨的浓度为5毫克/毫升时,测定下限分别为镧、钕和钐0.002%,铈0.003%和钇0.0005%。获得了良好的实验结果,其相对标准偏差为1.2-6.2%。     

Synthesis and Structural Characterization of Adduct [La(NO_3)_3·4H_2O]·2(BQEB)

Differentkindsofopenchaincrownethershavebeensynthesizedasthemodelcompoundsofionophoresandtheirinteractionswithsodium,potassiumandrareearthionshavealsobeenstudiedl'z.PanshowedCe(III)yieldedalf1complexwithl,8-bis(8'-quinolyloxy)-3,6-dioxaandtheCe(IIl)ioncoordinatedbothtoetheroxygenandquinolinenitrogenatoms3.TUmInleridentifiedtwolanthanidenitratecomplexeshavingastoichiometryof3:2(3RE:2L)'.InordertostUdythefunctionsofbothquinolineandbenzenering,introducedintothepolyetherchain,a1inearpolyether…     

Thermal Analysis of the Conformational Disorder in SCLC Polymers with Rigid Backbone Glass transition studies

Bis [(ω-(4′-cyanobiphenyl)-4-yl)oxy-n-alkyl]norborn-5-ene-2,3-dicarboxylate was polymerised via ring opening metathesis polymerisation (ROMP). Two disubstituted polynorbornene derivatives both of cis configuration with different length of the side-chain were studied. Differential scanning calorimetry (DSC) was used to study the effect of thermal history on the assignment of the glass transition event associated with the biaxial orientation of a smectic phase. Glass transition temperatures, the change of isobaric specific heats at T_g and the enthalpies of isotropisation were calculated. The DSC traces only show the classic step-wise change in T_g in some cases, giving the evidence that the amorphous domains are constrained and highly restricted in movement due to the morphology developed as a result of the biaxial stretching. Based on the literature data of mono- and disubstituted polynorbornene derivatives and our calorimetric experiments, the shape of T_g dependence on number of (CH₂) units is interpreted. The origin of this shape is discussed. This revised version was published online in August 2006 with corrections to the Cover Date.     

氯化钠团簇的形成规律与结合能计算

当离子蒸气冷凝形成团簇时，其结构表现出特定的规律。文中对不同大小不同形状的氯化钠团簇结构与结合能进行了计算，以求揭示离子蒸气冷凝形成团簇的一些规律，并与实验结果进行对照。     

Acoustic wavefront imaging

We introduce a new class of experiments which provide graphic insights into the propagation of acoustic waves in anisotropic media. Simply stated, we have devised a means of observing the expanding acoustic wavefront from a point disturbance in a solid. The data may be viewed as a movie or a series of snapshots. The observed wavefronts represent the group-velocity surfaces of acoustic waves, which reflect the basic elastic anisotropy of the solid. The technique has been applied to coherent acoustic waves with frequencies in the megahertz range (at ambient temperatures) and to incoherent heat pulses in the hundred-gigahertz range (at liquid-helium temperatures). In this article, we first provide a pedagogical introduction to wave propagation in elastically anisotropic media, reviewing some early methods for visualizing acoustic waves. Next, we describe the “acoustic wavefront imaging” method and give representative results in crystals and composite materials. Finally, we show how this method relates to recent advances in phonon imaging and internal diffraction of ultrasound.