纳米SiO_2颗粒表面修饰的有机分子在介质中的光物理行为研究

利用Sol-Gel方法投篮了单分散性很好的球型二氧化硅纳米颗粒，通过表面化 学修饰法引入了带有荧光发色团的有机分子，通过稳态光物理方法研究了纳米颗粒 表面的有机分子在水、乙醇以及阴、阳离子表面活性剂悬浮液中的光物理行为。实 验表明，纳米颗粒表面有机分子的分散状态是决定其光物理行为的主要因素。这一 结果为设计和开发新型“壳-核”型纳米二氧化硅荧光传感器提供了有用的参考。     

Static SIMS analysis of carbonate on basic alkali‐bearing surfaces

Carbonate is a somewhat enigmatic anion in static secondary ion mass spectrometry (SIMS) because abundant ions containing intact CO₃^2? are not detected when analyzing alkaline‐earth carbonate minerals common to the geochemical environment. In contrast, carbonate can be observed as an adduct ion when it is bound with alkali cations. In this study, carbonate was detected as the adduct Na₂CO₃·Na⁺ in the spectra of sodium carbonate, bicarbonate, hydroxide, oxalate, formate and nitrite and to a lesser extent nitrate. The appearance of the adduct Na₂CO₃·Na⁺ on hydroxide, oxalate, formate and nitrite surfaces was interpreted in terms of these basic surfaces fixing CO₂ from the ambient atmosphere. The low abundance of Na₂CO₃·Na⁺ in the static SIMS spectrum of sodium nitrate, compared with a significantly higher abundance in salts having stronger conjugate bases, suggested that the basicity of the conjugate anions correlated with aggressive CO₂ fixation; however, the appearance of Na₂CO₃·Na⁺ could not be explained simply in terms of solution basicity constants. The oxide molecular ion Na₂O⁺ and adducts NaOH·Na⁺ and Na₂O·Na⁺ also constituted part of the carbonate spectral signature, and were observed in spectra from all the salts studied. In addition to the carbonate and oxide ions, a low‐abundance oxalate ion series was observed that had the general formula Na_2?xH_xC₂O₄·Na⁺, where 0 < x < 2. Oxalate adsorption from the laboratory atmosphere was demonstrated but the oxalate ion series also was likely to be formed from reductive coupling occurring during the static SIMS bombardment event. The remarkable spectral similarity observed when comparing the sodium salts indicated that their surfaces shared common chemical speciation and that the chemistry of the surfaces was very different from the bulk of the particle. Copyright © 2003 John Wiley & Sons, Ltd.     

Polymer-protected palladium nanoparticles. Morphologies and catalytic selectivities

Colloidal palladium nanocatalysts prepared by in situ reductions of palladium chloride were immobilized and protected by either of two water-soluble polymers. The particle sizes and size distributions of the palladium colloids were determined by transmission electron microscopy. Their selectivities as catalysts were determined by comparing the extents of hydrogenation of carefully chosen pairs of small-molecule olefins. There was found to be high hydrogenation selectivity with regard to cyclic vs. noncyclic olefins. Selectivity was relatively low, however, among olefins that differed only in size (such as hexene vs. octene), or olefins differing only with regard to the positions of the double bonds (such as 1-octene vs. 3-octene). Selectivity could be improved by careful choice of the immobilizing polymer, and by its use at relatively high concentrations.     

Organoelement Compounds with Al?Al,Ga?Ga,and In?In Bonds

In the attempt to synthesize compounds with aluminum in a low oxidation state and an Al Al bond, by the reduction of alkylaluminum halides with alkali metals, analogous to a Wurtz coupling, in general the deposition of elemental aluminum and the formation of the corresponding trialkylaluminum compounds is observed. Thus, tetrasubstituted dialuminum compounds R₂Al AlR₂, apart from a few poorly characterized examples, were for a long time considered part of an unverified class of substances. Only with the sterically very highly shielded tetrakis[bis(trimethylsilyl)methyl]dialuminum did we achieve the synthesis of the first completely characterized organoelement compound with unlimited stability, which shows aluminum in the oxidation state + II and has an Al Al bond. In the meantime, corresponding compounds for the elements gallium and indium have been obtained. With the simple access to tetrasubstituted dimetal compounds, a fascinating new research area has opened for preparative chemistry, in which the particular interest will naturally lie in the reactive properties of the metal-metal bond.     

化学形态分析

本文综述了金属元素的化学形态分析,包括:形态分析的方法与技术,形态分析在水、土壤、空气和生物样品中的应用,样品的处理方法等。     

Synthese und Struktur von Li3RhH6, einem ternären Hydrid mit isolierten [RhH6]3−-Oktaedern

Synthesis and Structure of Li₃RhH₆ — a Ternary Hydride with Isolated [RhH₆]^3? Octahedra The ternary rhodium hydride Li₃RhH₆ was synthesized by the reaction of lithium hydride with rhodium under a hydrogen pressure of 80 bar. X-ray investigations on powdered samples and an elastic neutron diffraction experiment on the deuterated compound led to the complete structure determination (space group: Pnma, Z = 4). The atomic arrangement is isotypic to the Na₃RhH₆ structure type. The crystal structure contains isolated [RhH₆]^3? octahedra, which are separated by the lithium ions.     

Trends in Preconcentration Procedures for Metal Determination Using Atomic Spectrometry Techniques

 Methods for metal preconcentration are often described in the literature. However, purposes are often different, depending on whether the methods are applied in environmental, clinical or technological fields. The respective method needs to be efficient, give high sensitivity, and ideally also is selective which is useful when used in combination with atomic spectroscopy. This review presents the actual tendencies in metal preconcentration using techniques such as Flame Atomic Absorption Spectrometry (FAAS), Electrothermal Atomic Absorption Spectrometry (ETAAS), Hydride Generation Atomic Absorption Spectrometry (HGAAS), Inductively Coupled Plasma Optical Emission Spectrometry (ICP OES) and Inductively Coupled Plasma Mass Spectrometry (ICP-MS). Procedures based on related to electrochemical, coprecipitation/precipitation, liquid–liquid and solid–liquid extraction and atom trapping mechanisms are presented. Correspondence: Department of Analytical Chemistry, Universidade Estadual de Campinas – UNICAMP, P.O. Box 6154, 13083-970 Campinas, Brazil. e-mail: zezzi@iqm.unicamp.br Received December 20, 2001; accepted October 11, 2002     

Stability of Suspensions of Bioactive Particles Using Hybrid Organic–Inorganic Solutions as Dispersing Media

Functional coatings incorporating different types of particles developed by the sol–gel method have been proposed in the last few years for diverse applications. This work focuses on the preparation of homogeneous coatings prepared from stable suspensions with 10 wt% of glass and glass ceramic particles in a hybrid organic–inorganic solution as dispersing media. For this purpose, the pH was shifted up to 6–7 by adding tetrapropylammonium hydroxide (TPAH) which behaves as a cationic surfactant being probably adsorbed on the particles surface, while the sol maintains stable. Rheological measurements were performed to study the stability of the suspensions prepared at different conditions such as the kind and concentration of dispersant and the pH conditions. After sintering at 450^∘C/30 min, coatings around 2 μ m in thickness were obtained.     

SYNTHESIS AND PROPERTIES OF POLYSTYRENE／LAPONITE NANOCOMPOSITES

Exfoliated polystyrene (PS)/laponite nanocomposites were prepared successfully. The characteristic doo1 diffraction peak of organo-laponite disappeared in the XRD patterns of nanocomposites, indicating that the laponite layers were exfoliated and the ordered crystal structure of laponite was destroyed because of the styrene polymerization. TEM observations showed that the exfoliated laponite primary particles were dispersed randomly in the PS matrix with lateral dimensions from 1 nm to 10 rim. SEM results showed that the PS/laponite nanocomposite particles were almost monodispersed spheres with the size of about 120 rim. Because of the interaction between PS and laponite nanolayers, the nanocomposites exhibited higher thermal stability and glass transition temperature when compared to pure PS.