核-壳型聚丙烯酸酯复合乳液

简述了核-壳型聚丙烯酸酯复合乳液的合成方法、形态及其影响因素与判断方法、结构与性能等方面的研究进展;认为核-壳型复合乳液膜机械性能优良的原因是:核、壳两相间存在的过渡区适当地抑制了二者的相分离。     

Core/shell particles containing 3-(methacryloxypropyl)-trimethoxysilane in the shell: synthesis, characterization, and application

In comparison to the corresponding single-component counterparts, core/shell particles are widely used due to their better physical and chemical properties. The surface properties of core/shell particles evidently play an important role in the process of application. It is easy to deduce that surface properties mostly depend on the properties of the component in the shell. Therefore, desirable materials of shell are very significant for the study of composite materials, especially in core/shell field. It is well known that polysiloxane has excellent properties, such as the water repellency, high flexibility, low surface energy, and biocompatibility. Its application, however, is limited due to poor cohesiveness and poor film-forming properties. Recently, much endeavor has been made to overcome such flaws. It is found that polyacrylate is commonly considered for its good cohesiveness and excellent film-forming property. The combination of polysiloxane and polyacrylate has been shown to be important in the composite material field, especially as core/shell particles. Unfortunately, their hydrophobicity is considerably different and thus, the core/shell particles consisting of polyacrylate (PA)/polysiloxane (PSi) are hard to prepare by general seeded emulsion polymerization, and are also scarcely available in the literature. In this study, the new core/shell PA/PSi particles with poly(butyl methacrylate) (PA) as the core and poly(3-(methacryloxypropyl)-trimethoxysilane) (PSi) as the shell were prepared by dispersion polymerization under the kinetically controlled conditions. The characterization of the particles by TEM, DSC, particle size analyzer as well as static contact angle confirmed the formation of core/shell structure. The application of core/shell (PA/PSi) particles also has been considered and discussed here.TEM micrographs of core/shell (PA/PSi) particles.     

Preparation and characterization of NiFe bimetallic micro-particles and its composite with silica shell

Magnetic NiFe particles were synthesized through hydrothermal method using hydrazine as reductant. Composite particles with core-shell structure were further achieved by depositing silicon dioxide generated via carbonation decomposition of sodium silicate solution on the surface of magnetic cores. Characterized by XRD, the Ni₉Fe particles are of fcc-type structure, and the structure of magnetic cores in composite particles was maintained despite being covered by SiO₂ shell. The existence of SiO₂ shells in the composite particles were demonstrated by SEM, EDS and IR. The results from TG and VSM indicated that the shell structure affected the physiochemical properties. The composite particles exhibited remarkable resistance to oxidation in comparison with Ni₉Fe particles due to being protected by SiO₂ shell. Meanwhile, both of them are soft magnetic materials, but Ms, Mr and Hc in Ni₉[email protected]₂ particle decreased compared with magnetic NiFe particles. The formation mechanisms of Ni₉Fe micro-particles and composite Ni₉Fe particles were discussed.     

Insight into the extractability of metals from soils using an implementation of the linear adsorption isotherm model

This paper deals with an often overlooked artifact in sequential and single extraction of metals from soils, viz. the volume to mass (V/m) ratio as a potential source for inadequate extraction yields. We offer a theoretical framework to get a grip on this intricate parameter and came up with a model based on a linear adsorption isotherm to derive the correct maximal metal extractability for a certain extractant. We verified the model experimentally using 0.1 mol l⁻¹ nitric acid for extraction of seven metals (Cr, Co, Cu, Cd, Pb, Ni and Zn) from an urban soil sample, and concluded that commonly used V/m ratios in the range of 10-40 ml g⁻¹ may give as much as 50% too low extraction yields. Thus, a strong caveat is in place as to be very critical what V/m ratios to use and preferably apply the model derived to obtain the correct maximal extractability using a variable V/m ratio method.     

Synthesis and chelation properties of new polymeric ligand derived from 8-hydroxy-5-azoquinoline hydroxy benzene

8-Hydroxy-5-azoquinoline phenyl methacrylate-formaldehyde (8H5AQPMA-F) macromonomer was prepared from methacryloyl chloride with condensation products of 8-hydroxy-5-azoquinoline phenol-formaldehyde, and polymerized in DMF at 70 °C using benzoyl peroxide as free radical initiator. Poly(8H5AQPMA-F) was characterized by infrared and nuclear magnetic resonance spectroscopic techniques. Polychelates were obtained when the DMF solution of the resin containing few drops of ammonia was treated with the aqueous solution of Cu(II)/Ni(II). Elemental analysis of the polychelates indicates that the metal to ligand ratio was about 1:2. The IR spectra of polychelates suggest that the metals were coordinated through the oxygen of the phenolic-OH group and nitrogen of the quinoline ligand. The DRS and magnetic moment data indicate a square planar for Cu(II) complex whereas octahedral for Ni(II) complex. The TGA data revealed the thermal stability of the resin and the polychelates. X-ray diffraction study revealed the incorporation of the metal ions significantly enhanced the degree of crystallinity. The sorption properties of the chelate-forming resin towards various divalent metal ions [Cu(II) and Ni(II)] were studied as a function of pH and electrolyte.     

Thermal Emulsion Polymerization without any Conventional Initiators and Emulsifiers

Stable poly(styrene-co-sodium styrene sulfonate) (P(St-NaSS) nanoparticles with broader size distribution were synthesized by thermal emulsion polymerization without any conventional initiators and emulsifiers. The obtained polymer nanoparticles have higher ξ potential, and the particle sizes have broad distribution. The stability of polymer particles originated from the addition of small amounts of ionic comonomer, NaSS, which can act as an emulsifier in somewhat. The monomer conversion could reach up to about 28 wt% in 48 h, and did not increase by further polymerization when higher polymerization temperature (120 ℃) was employed. This polymerization system may be give some further understand for mechanism of emulsion polymerization.     

A New Kind of Void Soap-free P（MMA-EA-MAA） Latex Particles

Soap-flee P(MMA-EA-MAA) particles with narrow size distribution were synthesized by seeded emulsion polymerization of methyl methacrylate (MMA), ethyl acrylate (EA) and methacrylic acid (MAA), and large voids inside the particles were generated by alkali posttreatment in the presence of 2-butanone. Results indicated that the size of void and theparticle volume were related with the amount of 2-butanone. The generation mechanism of voids was proposed.     

Effect of HF addition on the microwave-assisted acid-digestion for the determination of metals in coal by inductively coupled plasma-atomic emission spectrometry

The microwave-assisted acid-digestion for the determination of metals in coal by ICP-AES was investigated, especially focusing on the necessity of adding HF. By testing five certified reference materials, BCR-180, BCR-040, NIST-1632b, NIST-1632c, and SARM-20, it was found that the two-stage digestion without HF (HNO₃ + H₂O₂ was used) was very effective for the pretreatment of ICP-AES measurement. Both major metals (Al, Ca, Fe, and Mg) and minor or trace metals (Co, Cr, Cu, Mn, Ni, Pb, and Zn) in coal gave good recoveries for their certified or reference values. The possibility of ‘HF-memory effect’ was cancelled by the use of a set of vessels which had been never contacted with HF. Twenty-four Japanese standard coals (SS coals) were analyzed by the present method, and the concentrations of major metals measured by the present method provided very high accordance with those from the authentic JIS (Japanese Industrial Standard) method.     

Crystal habit of fcc metal particles controlled by electrode potential in solution

The crystal habit of fcc metal particles formed on an amorphous carbon film electrode in solution at different electrode potentials is discussed. The fcc metal particles have different crystallographic habits depending on applied electrode potential; that is, icosahedral and/or decahedral particles are formed at lower potentials, and fcc single-crystalline or polycrystalline particles at higher potentials. It was found that decahedra and icosahedra of Cu-Au alloy particles are formed in the potential region of underpotential deposition (UPD) of Cu at which only fcc Au single-crystalline particles and Au polycrystalline particles appear. This is attributed to the charge transfer from the UPD Cu ions to the Au overlayer of Cu-Au alloy particles. The formation of decahedral and icosahedral Cu-Au alloy particles depends on the composition of the Cu-Au alloy. On the basis of these results it was deduced that the contraction of the surface lattice of the growing particles is responsible for the formation of icosahedral and decahedral particles. Received: 25 February 1997 / Accepted: 21 April 1997     

Spectrofluorometric determination of certain quinolone antibacterials using metal chelation

Simple, rapid, reliable, and sensitive spectrofluorometric methods were developed for the determination of eight quinolone antibacterials namely ciprofloxacin, norfloxacin, lomefloxacin, difloxacin, amifloxacin, pefloxacin, ofloxacin, and nalidixic acid. The methods depend on the chelation of each of the studied drugs with zirconium, molybdenum, vanadium or tungsten to produce fluorescent chelates. Different factors affecting the relative fluorescence intensity of the resulting chelates were studied and optimised. At the optimum reaction conditions, the drug-metal chelates showed excitation maxima ranging from 274 to 295 nm and emission maxima ranging from 409 to 495 nm. The chelates were found to be stable at room temperature for 2 days and show good stability upon increasing temperature to 50 °C for about 1 h. Rectilinear calibration graphs were obtained in the range of 10-60 ng ml⁻¹ for each of the investigated drugs and the limits of detection and quantitation ranged from 1.214 to 2.046 and from 4.047 to 6.819 ng ml⁻¹, respectively. The molar ratios of the formed chelates were determined by Job's method and their association constants were also calculated. The developed methods were applied successfully for the determination of the studied drugs in their pharmaceutical dosage forms with a good precision and accuracy compared to official and reported methods as revealed by t- and F-tests. They were also applied for the determination of studied drugs in spiked urine and plasma samples.